EN ISO 11363-1:2010/AC:2012

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Technical Corrigendum 2 (ISO 11363-1:2010/Cor 2:2012)

This part of ISO 11363 specifies dimensions and tolerances for taper screw threads of nominal diameter 17,4 mm (designated 17E) and 25,8 mm (designated 25E) used for the connection of valves to gas cylinders. It does not cover the connection requirements for: - mechanical strength; - gas tightness; - capability of repeated assembly and dismounting operations. Gauge inspection is covered by ISO 11363-2.

Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit Gasflaschen - Teil 1: Spezifikationen - Berichtigung 2 (ISO 11363-1:2010/Cor 2:2012)

Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1: Spécifications - Rectificatif technique 2 (ISO 11363-1:2010/Cor 2:2012)

Plinske jeklenke - Konična navoja 17E in 25E za priključitev ventila na plinsko jeklenko - 1. del: Specifikacije - Tehnični popravek 2 (ISO 11363-1:2010/Cor 2:2012)

Ta del ISO 11363 določa dimenzije in tolerance za konična navoja vijakov z nominalnim premerom 17,4 mm (oznaka 17E) in 25,8 mm (oznaka 25E), ki se uporabljata za priključitev ventila na plinsko jeklenko. Ne zajema zahtev za priključitev za:
– mehansko trdnost;
- nepropustnost za pline;
- sposobnost večkratnih operacij sestavljanja in razstavljanja.
Pregled merilnika je zajet v ISO 11363-2.

General Information

• Status: Withdrawn
• Publication Date: 14-Jan-2012
• Withdrawal Date: 20-Feb-2018
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 23 - Transportable gas cylinders
• Drafting Committee: CEN/TC 23 - Transportable gas cylinders
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Feb-2018
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Ref Project: SIST EN ISO 11363-1:2010/AC:2012 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Technical Corrigendum 2 (ISO 11363-1:2010/Cor 2:2012)

Relations

• Replaces: EN ISO 11363-1:2010/AC:2011 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Technical Corrigendum 1 (ISO 11363-1:2010/Cor 1:2011)
• Effective Date: 19-Nov-2011
• Replaced By: EN ISO 11363-1:2018 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
• Effective Date: 08-Jun-2022
• Corrects: EN ISO 11363-1:2010 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2010)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit Gasflaschen - Teil 1: Spezifikationen (ISO 11363-1:2010/Cor 2:2012)Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1: Spécifications - Rectificatif technique 2 (ISO 11363-1:2010/Cor 2:2012)Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Technical Corrigendum 2 (ISO 11363-1:2010/Cor 2:2012)23.020.30MHNOHQNHPressure vessels, gas cylinders21.040.30Posebni navojiSpecial screw threadsICS:Ta slovenski standard je istoveten z:EN ISO 11363-1:2010/AC:2012SIST EN ISO 11363-1:2010/AC:2012en,fr,de01-maj-2012SIST EN ISO 11363-1:2010/AC:2012SLOVENSKI
STANDARDSIST EN ISO 11363-1:2010/AC:20111DGRPHãþD



SIST EN ISO 11363-1:2010/AC:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 11363-1:2010/AC
January 2012
Janvier 2012
Januar 2012 ICS 23.020.30 Supersedes EN ISO 11363-1:2010/AC:2011English version Version Française Deutsche Fassung
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Technical Corrigendum 2 (ISO 11363-1:2010/Cor 2:2012)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1: Spécifications - Rectificatif technique 2 (ISO 11363-1:2010/Cor 2:2012)
Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit Gasflaschen - Teil 1: Spezifikationen (ISO 11363-1:2010/Cor 2:2012) This corrigendum becomes effective on 15 January 2012 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 15 janvier 2012 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 15. Januar 2012 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Bruss
...