EN ISO/ASTM 52915:2020
(Main)Specification for additive manufacturing file format (AMF) Version 1.2 (ISO/ASTM 52915:2020)
Specification for additive manufacturing file format (AMF) Version 1.2 (ISO/ASTM 52915:2020)
This document provides the specification for the Additive Manufacturing File Format (AMF), an interchange format to address the current and future needs of additive manufacturing technology.
This document specifies the requirements for the preparation, display and transmission for the AMF. When prepared in a structured electronic format, strict adherence to an extensible markup language (XML)[1] schema supports standards-compliant interoperability.
NOTE A W3C XML schema definition (XSD) for the AMF is available from ISO from http://standards.iso.org/iso/52915 and from ASTM from www.astm.org/MEETINGS/images/amf.xsd. An implementation guide for such an XML schema is provided in Annex A.
It is recognized that there is additional information relevant to the final part that is not covered by the current version of this document. Suggested future features are listed in Annex B.
This document does not specify any explicit mechanisms for ensuring data integrity, electronic signatures and encryptions.
Spezifikation für ein Dateiformat für Additive Fertigung (AMF) Version 1.2 (ISO/ASTM 52915:2020)
Dieses Dokument enthält Festlegungen für das Dateiformat für additive Fertigung (AMF), ein Austauschformat zur Erfüllung der aktuellen und zukünftigen Bedürfnisse der additiven Fertigungstechnologie.
Dieses Dokument legt die Anforderungen an die Erstellung, die Anzeige und die Übertragung für das AMF fest. Bei Erstellung in einem strukturierten elektronischen Format unterstützt die strenge Einhaltung eines erweiterbaren Auszeichnungsspracheschemas (XML) [1] die normgerechte Interoperabilität.
ANMERKUNG Eine W3C XML Schema Festlegung (XSD) für das AMF ist von ISO auf http://standards.iso.org/iso/52915 und von ASTM auf www.astm.org/MEETINGS/images/amf.xsd verfügbar. Anhang A enthält einen Implementierungsleitfaden für ein solches XML Schema.
Es wird anerkannt, dass zusätzlich relevante Informationen für den letzten Teil bestehen, die von der aktuellen Version dieses Dokuments nicht behandelt werden. Vorgeschlagene zukünftige Eigenschaften sind in Anhang B aufgelistet.
Dieses Dokument legt keine ausdrücklichen Mechanismen für die Sicherstellung der Datenintegrität, der elektronischen Signaturen und der Verschlüsselungen fest.
Spécification pour le format de fichier pour la fabrication additive (AMF) Version 1.2 (ISO/ASTM 52915:2020)
Le présent document fournit la spécification du format de fichier pour la fabrication additive (AMF), un format d'échange dans le but de traiter les besoins actuels et futurs de la technologie de fabrication additive.
Le présent document spécifie les exigences pour la préparation, l'affichage et la transmission pour l'AMF. Lorsqu'il est élaboré dans un format électronique structuré, le strict respect d'un schéma de langage de balisage extensible (XML)[1] prend en charge une interopérabilité normalisée.
NOTE Un schéma de définition XML W3C (XSD) du format de fichier pour la fabrication additive (AMF) est disponible auprès de l'ISO à l'adresse http://standards.iso.org/iso/52915 et de l'ASTM à l'adresse www.astm.org/MEETINGS/images/amf.xsd. L'Annexe A contient des lignes directrices de mise en œuvre pour ce type de représentation XML.
Il est reconnu que des informations supplémentaires existent concernant la dernière partie laquelle n'est pas couverte par la version actuelle du présent document. De futures fonctionnalités proposées figurent à l'Annexe B.
Le présent document ne spécifie pas de mécanismes explicites pour assurer l'intégrité des données, les signatures électroniques et les cryptages.
Specifikacija formatov datotek za aditivno proizvodnjo (AMF), različica 1.2 (ISO/ASTM 52915:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2020
Nadomešča:
SIST EN ISO 52915:2017
Specifikacija formatov datotek za aditivno proizvodnjo (AMF), različica 1.2
(ISO/ASTM 52915:2020)
Specification for additive manufacturing file format (AMF) Version 1.2 (ISO/ASTM
52915:2020)
Spezifikation für ein Dateiformat für Additive Fertigung (AMF) Version 1.2 (ISO/ASTM
52915:2020)
Spécification normalisée pour le format de fichier pour la fabrication additive (AMF)
Version 1.2 (ISO/ASTM 52915:2020)
Ta slovenski standard je istoveten z: EN ISO/ASTM 52915:2020
ICS:
25.030 3D-tiskanje Additive manufacturing
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO/ASTM 52915
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 25.030; 35.240.50 Supersedes EN ISO/ASTM 52915:2017
English Version
Specification for additive manufacturing file format (AMF)
Version 1.2 (ISO/ASTM 52915:2020)
Spécification pour le format de fichier pour la Spezifikation für ein Dateiformat für Additive
fabrication additive (AMF) Version 1.2 (ISO/ASTM Fertigung (AMF) Version 1.2 (ISO/ASTM 52915:2020)
52915:2020)
This European Standard was approved by CEN on 18 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/ASTM 52915:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO/ASTM 52915:2020) has been prepared by Technical Committee ISO/TC 261
"Additive manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive
Manufacturing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO/ASTM 52915:2017.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO/ASTM 52915:2020 has been approved by CEN as EN ISO/ASTM 52915:2020 without
any modification.
INTERNATIONAL ISO/ASTM
STANDARD 52915
Third edition
2020-03
Specification for additive
manufacturing file format (AMF)
Version 1.2
Spécification pour le format de fichier pour la fabrication additive
(AMF) Version 1.2
Reference number
ISO/ASTM 52915:2020(E)
©
ISO/ASTM International 2020
ISO/ASTM 52915:2020(E)
© ISO/ASTM International 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be
reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
ISO copyright office ASTM International
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: +41 22 749 01 11 Phone: +610 832 9634
Fax: +41 22 749 09 47 Fax: +610 832 9635
Email: copyright@iso.org Email: khooper@astm.org
Website: www.iso.org Website: www.astm.org
Published in Switzerland
ii © ISO/ASTM International 2020 – All rights reserved
ISO/ASTM 52915:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Key considerations . 2
4.1 General . 2
4.2 Guidelines for the inclusion of future new elements . 3
5 Structure of this specification .3
6 General structure .4
7 Geometry specification .5
7.1 General . 5
7.2 Smooth geometry . 6
7.3 Restrictions on geometry . 7
8 Material specification .7
8.1 General . 7
8.2 Mixed and graded materials and substructures . 9
8.3 Porous materials . 9
8.4 Stochastic materials .10
9 Colour specification.10
9.1 General .10
9.2 Colour gradations and texture mapping .11
9.3 Transparency .12
10 Texture specification .12
11 Constellations .12
12 Metadata .13
13 Compression and distribution .14
14 Minimal implementation .14
Annex A (informative) AMF XML schema implementation guide .15
Annex B (informative) Performance data and future features .24
Bibliography .27
© ISO/ASTM International 2020 – All rights reserved iii
ISO/ASTM 52915:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 261, Additive manufacturing, in
cooperation with ASTM F 42.91, Terminology, on t
...
SLOVENSKI STANDARD
01-junij-2020
Nadomešča:
SIST EN ISO 52915:2017
Specifikacija formatov datotek za 3D-tisk (AMF), različica 1.2 (ISO/ASTM
52915:2020)
Specification for additive manufacturing file format (AMF) Version 1.2 (ISO/ASTM
52915:2020)
Spezifikation für ein Dateiformat für Additive Fertigung (AMF) Version 1.2 (ISO/ASTM
52915:2020)
Spécification normalisée pour le format de fichier pour la fabrication additive (AMF)
Version 1.2 (ISO/ASTM 52915:2020)
Ta slovenski standard je istoveten z: EN ISO/ASTM 52915:2020
ICS:
25.030 3D-tiskanje Additive manufacturing
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO/ASTM 52915
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 25.030; 35.240.50 Supersedes EN ISO/ASTM 52915:2017
English Version
Specification for additive manufacturing file format (AMF)
Version 1.2 (ISO/ASTM 52915:2020)
Spécification pour le format de fichier pour la Spezifikation für ein Dateiformat für Additive
fabrication additive (AMF) Version 1.2 (ISO/ASTM Fertigung (AMF) Version 1.2 (ISO/ASTM 52915:2020)
52915:2020)
This European Standard was approved by CEN on 18 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/ASTM 52915:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO/ASTM 52915:2020) has been prepared by Technical Committee ISO/TC 261
"Additive manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive
Manufacturing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO/ASTM 52915:2017.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO/ASTM 52915:2020 has been approved by CEN as EN ISO/ASTM 52915:2020 without
any modification.
INTERNATIONAL ISO/ASTM
STANDARD 52915
Third edition
2020-03
Specification for additive
manufacturing file format (AMF)
Version 1.2
Spécification pour le format de fichier pour la fabrication additive
(AMF) Version 1.2
Reference number
ISO/ASTM 52915:2020(E)
©
ISO/ASTM International 2020
ISO/ASTM 52915:2020(E)
© ISO/ASTM International 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be
reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
ISO copyright office ASTM International
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: +41 22 749 01 11 Phone: +610 832 9634
Fax: +41 22 749 09 47 Fax: +610 832 9635
Email: copyright@iso.org Email: khooper@astm.org
Website: www.iso.org Website: www.astm.org
Published in Switzerland
ii © ISO/ASTM International 2020 – All rights reserved
ISO/ASTM 52915:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Key considerations . 2
4.1 General . 2
4.2 Guidelines for the inclusion of future new elements . 3
5 Structure of this specification .3
6 General structure .4
7 Geometry specification .5
7.1 General . 5
7.2 Smooth geometry . 6
7.3 Restrictions on geometry . 7
8 Material specification .7
8.1 General . 7
8.2 Mixed and graded materials and substructures . 9
8.3 Porous materials . 9
8.4 Stochastic materials .10
9 Colour specification.10
9.1 General .10
9.2 Colour gradations and texture mapping .11
9.3 Transparency .12
10 Texture specification .12
11 Constellations .12
12 Metadata .13
13 Compression and distribution .14
14 Minimal implementation .14
Annex A (informative) AMF XML schema implementation guide .15
Annex B (informative) Performance data and future features .24
Bibliography .27
© ISO/ASTM International 2020 – All rights reserved iii
ISO/ASTM 52915:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 261, Additive manufacturing, in
cooperation with ASTM F 42.91, Terminology, on the basis of a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.