prEN ISO 14732
(Main)Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO/DIS 14732:2024)
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO/DIS 14732:2024)
This document specifies requirements for qualification of welding operators and also weld setters for mechanized and automatic welding.
This document does not apply to personnel exclusively performing loading or unloading of the automatic welding unit.
This document is applicable when qualification testing of welding operators and weld setters is required by the contract or by the application standard.
The requirements for testing of stud welding operators and setters are given in ISO 14555. The qualification and revalidation is in accordance with this document.
One annex deals with functional knowledge. Another annex deals with welding technical knowledge, a third annex outlines the qualification test certificate.
Schweißpersonal - Prüfung von Bedienern und Einrichtern zum mechanischen und automatischen Schweißen von metallischen Werkstoffen (ISO/DIS 14732:2024)
Dieses Dokument legt die Anforderungen für die Qualifizierung von Bedienern und Einrichtern von Schweißeinrichtungen für das mechanische und automatische Schweißen von metallischen Werkstoffen fest.
Dieses Dokument gilt nicht für Personal, das:
keine Schweißparameter kontrolliert oder anpasst; oder
nicht an der Einrichtung von Schweißausrüstung beteiligt ist.
Anhang A legt Anforderungen an die Funktionskenntnisse über die Schweißeinrichtung fest. Anhang B enthält Hinweise zu der erforderlichen Fachkunde über die Technologie beim Schweißen.
Die Qualifizierung von Bedienern und Einrichtern von Schweißeinrichtungen für das Rührreibschweißen und das Rührreibpunktschweißen wird in diesem Dokument nicht behandelt, siehe ISO 25239 3 und ISO 18785 3.
Die Grundsätze dieses Dokuments dürfen angewendet werden auf andere Prozesse, die in diesem Dokument nicht behandelt werden.
Personnel en soudage - Épreuve de qualification des opérateurs soudeurs et des régleurs en soudage pour le soudage mécanisé et le soudage automatique des matériaux métalliques (ISO/DIS 14732:2024)
Ce document spécifie des exigences relatives à la qualification des opérateurs soudeurs et des régleurs en soudage pour le soudage mécanisé et le soudage automatique.
Elle n'est pas applicable au personnel chargé exclusivement du chargement et du déchargement de l'unité de soudage.
Ce document est applicable lorsque l'épreuve de qualification des opérateurs soudeurs et des régleurs en soudage est exigée par le contrat ou par la norme d'application.
Varilno osebje - Preskušanje za kvalifikacijo varilnih operaterjev in pomožnega osebja za popolnoma mehanizirano in avtomatizirano varjenje kovinskih materialov (ISO/DIS 14732:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2023
Varilno osebje - Preskušanje za kvalifikacijo varilcev za popolnoma mehanizirano
talilno in uporovno varjenje kovinskih materialov (ISO/DIS 14732:2023)
Welding personnel - Qualification testing of welding operators and weld setters for
mechanized and automatic welding of metallic materials (ISO/DIS 14732:2023)
Schweißpersonal - Prüfung von Bedienern und Einrichtern zum mechanischen und
automatischen Schweißen von metallischen Werkstoffen (ISO/DIS 14732:2023)
Personnel en soudage - Épreuve de qualification des opérateurs soudeurs et des
régleurs en soudage pour le soudage mécanisé et le soudage automatique des
matériaux métalliques (ISO/DIS 14732:2023)
Ta slovenski standard je istoveten z: prEN ISO 14732
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14732
ISO/TC 44/SC 11 Secretariat: ANSI
Voting begins on: Voting terminates on:
2023-03-27 2023-06-19
Welding personnel — Qualification testing of welding
operators and weld setters for mechanized and automatic
welding of metallic materials
Personnel en soudage — Épreuve de qualification des opérateurs soudeurs et des régleurs en soudage pour
le soudage mécanisé et le soudage automatique des matériaux métalliques
ICS: 25.160.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14732:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
ISO/DIS 14732:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14732
ISO/TC 44/SC 11 Secretariat: ANSI
Voting begins on: Voting terminates on:
Welding personnel — Qualification testing of welding
operators and weld setters for mechanized and automatic
welding of metallic materials
Personnel en soudage — Épreuve de qualification des opérateurs soudeurs et des régleurs en soudage pour
le soudage mécanisé et le soudage automatique des matériaux métalliques
ICS: 25.160.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 14732:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
ISO/DIS 14732:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Qualification . 4
4.1 General . 4
4.2 Reference numbers of welding processes . 4
4.3 Methods of qualification . 4
4.3.1 General . 4
4.3.2 Fusion welding . 4
4.3.3 Resistance welding . 5
4.3.4 Arc stud welding . 5
4.3.5 Friction stir and friction stir spot welding . 5
4.3.6 Other processes not covered . 5
4.4 Variables and range of qualification . 5
4.4.1 Automatic welding . 5
4.4.2 Mechanized welding . . . 6
5 Period of validity . 6
5.1 Initial qualification . 6
5.2 Confirmation of validity . 6
5.3 Revalidation of qualification . 7
5.4 Revocation of qualification . 7
6 Welding operator or weld setter qualification test certificate . 7
7 Documentation . 7
Annex A (normative) Functional knowledge of the welding unit . 8
Annex B (informative) Knowledge of welding technology . 9
Annex C (informative) Qualification test certificate for welding operators or weld setters .13
Bibliography .15
iii
ISO/DIS 14732:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 11, Qualification requirements for welding and allied processes personnel.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
Official interpretations of ISO/TC 44 documents, where they exist, are available from this page:
https://committee.iso.org/sites/tc44/home/interpretation.html.
This third edition cancels and replaces the second edition (ISO 14732:2013), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— to be added after DIS ballot
iv
ISO/DIS 14732:2023(E)
Introduction
This document is intended to provide the basis for the mutual recognition by examining bodies of
qualification related to the competence of welding operators and weld setters in the various fields of
application. Tests shall by carried out in accordance with this document unless more severe tests are
specified by the relevant application standard, when these shall be applied.
The welding operator's or weld setter's ability and job knowledge continue to be approved only if the
welding operators or weld setters are working with reasonable continuity on welding work within the
extent of qualification. However, a functional knowledge test is mandatory.
It is presumed that the welding operator or weld setter has received training or has industrial practice
within the range of qualification.
All new qualifications are to be in accordance with this document from the date of issue.
At the end of its period of validity, the existing and valid qualification testing of welding operators
and weld setters in accordance with the requirements of a national standard may be revalidated in
accordance with this document. The new range of qualification will be interpreted in accordance with
the requirements of this document.
v
DRAFT INTERNATIONAL STANDARD ISO/DIS 14732:2023(E)
Welding personnel — Qualification testing of welding
operators and weld setters for mechanized and automatic
welding of metallic materials
1 Scope
This document specifies requirements for qualification of welding operators and weld setters.
This document does not apply to personnel:
— who do not control or adjust welding parameters,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.