CEN/TS 17959:2023
(Main)Safety of amusement rides and devices: Manufacturing quality recommendations for machinery components
Safety of amusement rides and devices: Manufacturing quality recommendations for machinery components
This document provides a method on how to assign minimum acceptable manufacturing quality requirements to amusement device metallic components which have been classified as machinery components. Bonded assemblies made in plastic composites are excluded from this scope. Quality requirements can be found in EN 13814-1:2019, 5.4.3.7.
Sicherheit von Fahrgeschäften und Vergnügungsanlagen - Empfehlungen für die Herstellung von Maschinenbauteilen
Dieses Dokument bietet ein Verfahren zur Zuordnung von zulässigen Mindestanforderungen an die Fertigungsqualität für metallische Bauteile für Vergnügungsanlagen, die als Maschinenbauteile klassifiziert wurden, an. Verklebte Baugruppen aus Verbundkunststoff sind nicht Teil dieses Anwendungsbereichs. Die Qualitätsanforderungen können EN 13814 1:2019, 5.4.3.7 entnommen werden.
Sécurité des manèges et des dispositifs de divertissement - Recommandations relatives à la qualité de fabrication pour les éléments de machinerie
Le présent document fournit une méthode permettant d’attribuer des exigences minimales acceptables en matière de qualité de fabrication aux éléments métalliques des dispositifs de divertissement qui ont été classés comme étant des éléments de machinerie. Les assemblages collés en composites plastiques n’entrent pas dans le domaine d’application du présent document. L’EN 13814-1:2019, 5.4.3.7 fournit les exigences en matière de qualité.
Varnost zabaviščnih atrakcij in naprav: Priporočila za kakovost proizvodnje za strojne komponente
Ta dokument določa metodo, kako minimalne sprejemljive zahteve glede kakovosti izdelave dodeliti kovinskim komponentam zabaviščnih naprav, ki so bile razvrščene kot strojne komponente. Vezani sestavi iz plastičnih kompozitov so zunaj tega področja uporabe. Zahteve glede kakovosti so navedene v standardu EN 13814-1:2019, 5.4.3.7.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17959:2023
01-november-2023
Varnost zabaviščnih atrakcij in naprav: Priporočila za kakovost proizvodnje za
strojne komponente
Safety of amusement rides and devices: Manufacturing Quality Recommendations for
Machinery Components
Sicherheit von Fahrgeschäften und Vergnügungsanlagen - Teil 4: Empfehlungen für die
Herstellung von Maschinenbauteilen
Sécurité des manèges et des dispositifs de divertissement - Recommandations relatives
à la qualité de fabrication pour les éléments de machinerie
Ta slovenski standard je istoveten z: CEN/TS 17959:2023
ICS:
97.200.99 Druga oprema za razvedrilo Other equipment for
entertainment
SIST-TS CEN/TS 17959:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17959:2023
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17959:2023
CEN/TS 17959
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
September 2023
TECHNISCHE SPEZIFIKATION
ICS 97.200.99
English Version
Safety of amusement rides and devices: Manufacturing
Quality Recommendations for Machinery Components
Sécurité des manèges et des dispositifs de Sicherheit von Fahrgeschäften und
divertissement - Recommandations relatives à la Vergnügungsanlagen: Empfehlungen für die
qualité de fabrication pour les éléments de machinerie Herstellung von Maschinenbauteilen
This Technical Specification (CEN/TS) was approved by CEN on 23 July 2023 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17959:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17959:2023
CEN/TS 17959:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Applicability of the Machinery component quality grade method. 7
5 Quality Grade . 8
5.1 Sub-components of machinery components . 8
5.2 Determination of Quality Grade . 10
5.2.1 General . 10
5.2.2 Redundancy considerations . 10
5.2.3 Commercial parts . 10
6 Quality
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.