EN 12640:2000
(Main)Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing
Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing
This Standard specifies the minimum requirements and test methods for lashing points fitted to commercial vehicles and trailers with flatbed body construction of maximum total mass above 3,5 t and intended for general use. The standard does not apply to - Vehicles designed and constructed exclusively for the transportation of bulk materials; - Vehicles designed and constructed exclusively for the transportation of specific cargo with particular securing requirements.
Ladungssicherung auf Straßenfahrzeugen - Zurrpunkte an Nutzfahrzeugen zur Güterbeförderung - Mindestanforderungen und Prüfung
Diese Norm legt die Mindestanforderungen und Prüfungen für Zurrpunkte an Lastkraftwagen und Anhängern mit Pritschenaufbauten und einer zulässigen Gesamtmasse von mehr als 3,5 t fest, die zur Stückgutbeförderung bestimmt sind. Die Norm gilt nicht für - Fahrzeuge, die nach ihrer Bauart und Einrichtung ausschließlich für die Beförderung von Schüttgütern bestimmt sind. - Fahrzeuge, die nach ihrer Bauart und Einrichtung für die Beförderung spezieller Güter mit besonderen Anforderungen an die Ladungssicherung bestimmt sind.
Arrimage des charges à bord des véhicules routiers - Points d'arrimage à bord des véhicules utilitaires pour le transport des marchandises - Prescriptions minimales et essais
La présente norme définit les prescriptions minimales et les méthodes d'essais relatives aux points d'arrimage destinés aux véhicules utilitaires et aux remorques d'usage général dont la structure comporte un plateau et dont la masse totale maximale est supérieure à 3,5 t.
La norme ne s'applique pas : - aux véhicules conçus et construits exclusivement pour le transport de produits en vrac ; - aux véhicules conçus et construits exclusivement pour le transport de marchandises spéciales comportant des exigences spécifiques pour l'arrimage des chargements.
Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jul-2000
- Withdrawal Date
- 13-Apr-2025
- Technical Committee
- CEN/TC 119 - Swap bodies for combined goods transport
- Drafting Committee
- CEN/TC 119/WG 7 - Cargo Securing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 11-Dec-2019
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 18-Dec-2019
Frequently Asked Questions
EN 12640:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing". This standard covers: This Standard specifies the minimum requirements and test methods for lashing points fitted to commercial vehicles and trailers with flatbed body construction of maximum total mass above 3,5 t and intended for general use. The standard does not apply to - Vehicles designed and constructed exclusively for the transportation of bulk materials; - Vehicles designed and constructed exclusively for the transportation of specific cargo with particular securing requirements.
This Standard specifies the minimum requirements and test methods for lashing points fitted to commercial vehicles and trailers with flatbed body construction of maximum total mass above 3,5 t and intended for general use. The standard does not apply to - Vehicles designed and constructed exclusively for the transportation of bulk materials; - Vehicles designed and constructed exclusively for the transportation of specific cargo with particular securing requirements.
EN 12640:2000 is classified under the following ICS (International Classification for Standards) categories: 43.080.10 - Trucks and trailers; 55.180.99 - Other standards related to freight distribution of goods. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12640:2000 has the following relationships with other standards: It is inter standard links to EN 12640:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12640:2000 is associated with the following European legislation: EU Directives/Regulations: 2014/47/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 12640:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testingLadungssicherung auf Straßenfahrzeugen - Zurrpunkte an Nutzfahrzeugen zur Güterbeförderung - Mindestanforderungen und PrüfungArrimage des charges a bord des véhicules routiers - Points d'arrimage a bord des véhicules utilitaires pour le transport des marchandises - Prescriptions minimales et essaisSecuring of cargo on road vehicles - Lashing points on commercial vehicles for good
...
The article discusses the EN 12640:2000 standard, which sets out the minimum requirements and testing methods for lashing points on commercial vehicles and trailers used for transporting goods. This standard specifically applies to commercial vehicles and trailers with flatbed bodies weighing more than 3.5 tons and intended for general use. However, it does not cover vehicles designed exclusively for transporting bulk materials or specific cargo that has unique securing requirements.
기사 제목: EN 12640:2000 - 도로차량의 화물 고정장치 - 상업용 차량의 화물운송용 통상적인 사용을 위한 고정점에 대한 최소 요구사항과 시험 기사 내용: 이 표준은 일반 사용을 목적으로 최대 전체 중량이 3.5톤 이상인 상업용 차량 및 플랫베드 본체 구조를 갖춘 트레일러에 장착된 고정점의 최소 요구사항과 시험 방법을 명시합니다. 이 표준은 다음 사항에는 적용되지 않습니다. - 대량 운반을 위해 전용으로 설계 및 제작된 차량 - 특정 운송물에 대한 고유의 고정 요구사항을 갖춘 차량
記事のタイトル: EN 12640:2000 - 道路車両における貨物の固定 - 一般的な使用を想定した商用車両の貨物輸送用縛りポイントに関する最低要件と試験 記事の内容：この標準は、一般的な使用を目的とした3.5トン以上の総重量を持つ商用車両およびフラットベッドボディ構造を持つトレーラーに取り付けられた縛りポイントの最低要件と試験法を規定しています。ただし、以下の場合には適用されません。- 大量輸送のために専用に設計・製造された車両- 特定の貨物に特有の固定要件を持つ車両
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...