EN 12004:2007+A1:2012

Adhesives for tiles - Requirements, evaluation of conformity, classification and designation

This European Standard is applicable to ceramic tile cementitious adhesives, dispersion adhesives and reaction resin adhesives for internal and external tile installations on walls and floors.
This standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the values of performance requirements for ceramic tile adhesives (cementitious, dispersion and reaction resin adhesives).
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

Mörtel und Klebstoffe für Fliesen und Platten - Anforderungen, Konformitätsbewertung, Klassifizierung und Bezeichnung

! Diese Europäische Norm gilt für zementhaltige Mörtel, Dispersions- und Reaktionsharzklebstoffe für keramische Fliesen und Platten an Wänden und Böden für innen und außen."
Diese Norm enthält die Terminologie für die Produkte, Arbeitsverfahren, Verwendungseigenschaften usw. für Mörtel und Klebstoffe für keramische Fliesen und Platten.
Diese Europäische Norm legt die Werte für die Leistungsanforderungen fest, die an Mörtel und Klebstoffe für keramische Fliesen und Platten (zementhaltige Mörtel, Dispersions- und Reaktionsharzklebstoffe) gestellt werden.
In dieser Europäischen Norm sind keine Kriterien oder Empfehlungen für die Ausführung und Verarbeitung keramischer Fliesen und Platten enthalten.
ANMERKUNG   Mörtel und Klebstoffe für keramische Fliesen und Platten dürfen auch für andere Arten von Fliesen und Platten (Naturwerkstein, Betonwerkstein usw.) verwendet werden, wenn diese Materialien hierdurch nicht beeinträchtigt werden.

Colles à carrelage - Exigences, évaluation de la conformité, classification et désignation

La présente Norme européenne s'applique aux mortier-colles, aux adhésifs en dispersion et aux colles réactives destinés à la pose en intérieur et en extérieur sur murs et sols de carreaux céramiques."
Cette norme définit la terminologie concernant les produits, les méthodes d'application, les propriétés de mise en œuvre, etc. applicables aux colles à carrelage céramique.
La présente Norme européenne spécifie les valeurs d'exigences performancielles relatives aux colles à carrelage céramique (mortier-colles, adhésifs en dispersion, colles réactives).
La présente Norme européenne ne contient ni critères, ni recommandations de conception et de pose de carrelage.
NOTE   Les colles à carrelage peuvent aussi être utilisées pour la pose d'autres types de carrelages (carreaux de pierres naturelles ou carreaux agglomérés, etc.) que les revêtements céramiques, si elles sont compatibles avec ces matériaux.

Lepila in malte za ploščice - Zahteve, vrednotenje skladnosti, klasifikacija in označevanje

Ta evropski standard se uporablja za cementna lepila za keramične ploščice, disperzijska lepila in reakcijska lepila na osnovi smol za lepljenje ploščic na stene ali tla v prostoru ali na prostem. Ta standard navaja izrazoslovje glede izdelkov, metod dela, lastnosti nanosa itd. za lepila za keramične ploščice. Ta evropski standard določa vrednosti glede učinkovitosti lepil za keramične ploščice (cementna lepila, disperzijska lepila in lepila na osnovi smole). Ta evropski standard ne zajema meril ali priporočil za projektiranje in nameščanje keramičnih ploščic.

General Information

• Status: Withdrawn
• Publication Date: 19-Jun-2012
• Withdrawal Date: 14-Feb-2017
• ICS: 83.180 - Adhesives
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 67 - Ceramic tiles
• Drafting Committee: CEN/TC 67/WG 3 - Adhesives and grouts for tiles
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Feb-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/127 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on construction adhesives
• Ref Project: SIST EN 12004:2007+A1:2012 - Adhesives for tiles - Requirements, evaluation of conformity, classification and designation

Relations

• Merged From: EN 12004:2007 - Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
• Effective Date: 18-Jan-2023
• Replaced By: EN 12004-1:2017 - Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
• Effective Date: 22-Feb-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.R]QDþHYDQMHMörtel und Klebstoffe für Fliesen und Platten - Anforderungen, Konformitätsbewertung, Klassifizierung und BezeichnungColles à carrelage - Exigences, évaluation de la conformité, classification et désignationAdhesives for tiles - Requirements, evaluation of conformity, classification and designation91.100.23Ceramic tiles91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12004:2007+A1:2012SIST EN 12004:2007+A1:2012en,fr,de01-september-2012SIST EN 12004:2007+A1:2012SLOVENSKI
STANDARD



SIST EN 12004:2007+A1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12004:2007+A1
June 2012 ICS 83.180; 91.100.10 Supersedes EN 12004:2007English Version
Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
Colles à carrelage - Exigences, évaluation de la conformité, classification et désignation
Mörtel und Klebstoffe für Fliesen und Platten - Anforderungen, Konformitätsbewertung, Klassifizierung und Bezeichnung This European Standard was approved by CEN on 4 February 2007 and includes Amendment 1 approved by CEN on 13 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12004:2007+A1:2012: ESIST EN 12004:2007+A1:2012



EN 12004:2007+A1:2012 (E) 2 Contents Page Foreword . 3Introduction . 41Scope . 52Normative references . 53Terms and definitions . 64Requirements . 94.1Cementitious adhesives (C) . 94.2Dispersion Adhesives (D) . 94.3Reaction resin adhesives (R) . 104.4Reaction to fire . 114.5Release of dangerous substances . 125Evaluation of conformity . 135.1Principle . 135.2Conditioning of the test specimen . 135.3Initial type testing . 135.4Factory Production Control .
...