EN 12053:2001+A1:2008

Safety of industrial trucks - Test methods for measuring noise emissions

This noise measurement standard gives methods for determining the sound pressure level at the operator's position and the sound power level of industrial and rough terrain trucks.
This European standard is a type test applicable to all industrial trucks listed in table A1.
The test results obtained in accordance with this standard are also applicable to the evaluation of the hazard generated by noise from industrial trucks.

Sicherheit von Flurförderungzeugen - Verfahren für die Messung der Geräuschemission

Diese Geräuschmessnorm legt ein Verfahren für die Ermittlung des Emissionsschalldruckpegels am Fahrerplatz und des Schalleistungspegels von Flurförderzeugen fest.
Diese Europäische Norm gilt als Typentest für alle Flurförderzeuge nach Tabelle A1.
Die Prüfergebnisse nach dieser Europäischen Norm sind auch anwendbar zur Beurteilung der Gefährdung durch Lärm von Flurförderzeugen.

Sécurité des chariots de manutention - Méthodes d'essai pour le mesurage des émissions de bruit

La présente norme de mesurage du bruit donne les modes opératoires pour la détermination du niveau de pression acoustique au poste de l’opérateur ainsi que du niveau de puissance acoustique des chariots de manutention et tout-terrain.
La présente norme décrit un essai de type applicable à tous les chariots de manutention listés dans le Tableau A.1.
Les résultats d’essais obtenus conformément à la présente norme permettent aussi d'évaluer les phénomènes dangereux engendrés par le bruit des chariots industriels.

Varnost vozil za talni transport - Preskusne metode za merjenje emisije hrupa

General Information

• Status: Published
• Publication Date: 22-Jul-2008
• Withdrawal Date: 27-Dec-2009
• ICS: 17.140.30 - Noise emitted by means of transport
• ICS: 53.060 - Industrial trucks
• Technical Committee: CEN/TC 150 - Industrial trucks - Safety
• Drafting Committee: CEN/TC 150/WG 9 - Noise
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 11-May-2023
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 12053:2002+A1:2008 - Safety of industrial trucks - Test methods for measuring noise emissions

Relations

• Merged From: EN 12053:2001 - Safety of industrial trucks - Test methods for measuring noise emissions
• Effective Date: 19-Jan-2023
• Merged From: EN 12053:2001/AC:2002 - Safety of industrial trucks - Test methods for measuring noise emissions
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost vozil za talni transport - Preskusne metode za merjenje emisije hrupaSicherheit von Flurförderungzeugen - Verfahren für die Messung der GeräuschemissionSécurité des chariots de manutention - Méthodes d'essai pour le mesurage des émissions de bruitSafety of industrial trucks - Test methods for measuring noise emissions53.060Industrijski tovornjakiIndustrial trucks17.140.30Emisija hrupa transportnih sredstevNoise emitted by means of transportICS:Ta slovenski standard je istoveten z:EN 12053:2001+A1:2008SIST EN 12053:2002+A1:2008en,fr01-december-2008SIST EN 12053:2002+A1:2008SLOVENSKI
STANDARD



SIST EN 12053:2002+A1:2008



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12053:2001+A1
July 2008 ICS 17.140.30; 53.060 Supersedes EN 12053:2001 English Version
Safety of industrial trucks - Test methods for measuring noise emissions
Sécurité des chariots de manutention - Méthodes d'essai pour le mesurage des émissions de bruit
Sicherheit von Flurförderungzeugen - Verfahren für die Messung der Geräuschemission This European Standard was approved by CEN on 19 February 2001 and includes Corrigendum 1 issued by CEN on 24 July 2002 and Amendment 1 approved by CEN on 15 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12053:2001+A1:2008: ESIST EN 12053:2002+A1:2008



EN 12053:2001+A1:2008 2 Contents Foreword.4 Introduction.6 1 Scope.6 2 Normative references.6 3 Terms and definitions.7 3.1 A-weighted emission sound pressure level at the operator’s position for the operational cycle LpAZ.7 3.2 A-weighted sound power level in an operational cycle LWAZ.8 3.3 Forwards operation.8 3.4 Industrial and rough terrain truck families.8 3.5 Idling.8 4 Installation and equipment.10 4.1 Test environment.10 4.2 Equipment and condition of the truck.11 4.3 Position of the truck during measurement.11 4.3.1 LIFT and IDLE conditions.
...