EN 1493:1998+A1:2008

Vehicle lifts

This standard applies to stationary, mobile and movable vehicle lifts, which are not intended to lift persons but which are designed to raise vehicles totally, for the purpose of examining and working on or under the vehicles whilst in a raised position. The vehicle lift may consist of one or more lifting units.
Power supply to the vehicle lift by internal combustion engines is not considered. The floor or ground supporting the vehicle lift in use is assumed to be horizontal.

Fahrzeug-Hebebühnen

Diese Norm gilt für stationäre, fahrbare und ortsveränderliche Fahrzeug-Hebebühnen, die bestimmungs-gemäß nicht für das Heben von Personen, sondern zum vollständigen Anheben von Fahrzeugen vorgesehen sind, um die angehobenen Fahrzeuge zu untersuchen und an oder unter ihnen zu arbeiten. Fahrzeug-Hebebühnen können aus einer oder mehreren Hubeinheiten bestehen.
Ein Antrieb der Fahrzeug-Hebebühne durch Verbrennungsmotoren wird nicht betrachtet. Es wird vorausgesetzt, dass der Boden, auf dem die Fahrzeug-Hebebühne benutzt wird, horizontal ist.

Elévateurs de véhicules

La présente norme s'applique aux élévateurs de véhicules fixes, mobiles et transférables, qui ne sont pas prévus pour le levage de personnes, mais qui sont conçus pour élever tout le véhicule afin de permettre les travaux de vérification, d'entretien et de réparation sur ou sous le véhicule lorsqu'il est en position levée.
L'élévateur de véhicule peut consister en une ou plusieurs unités de levage.
L'alimentation en énergie de l'élévateur de véhicule par des moteurs à combustion interne n'a pas été envisagée.
Le plancher ou le sol supportant l'élévateur de véhicule lors du fonctionnement est supposé être horizontal.

Dvigala za servisiranje vozil

General Information

• Status: Withdrawn
• Publication Date: 09-Dec-2008
• Withdrawal Date: 03-Aug-2010
• ICS: 43.180 - Diagnostic, maintenance and test equipment
• ICS: 53.020.99 - Other lifting equipment
• Technical Committee: CEN/TC 98 - Lifting platforms
• Drafting Committee: CEN/TC 98/WG 3 - Vehicle lifting devices
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Aug-2010
• Completion Date: 04-Aug-2010
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1493:1999+A1:2009 - Vehicle lifts

Relations

• Merged From: EN 1493:1998 - Vehicle lifts
• Effective Date: 22-Dec-2008
• Replaced By: EN 1493:2010 - Vehicle lifts
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dvigala za servisiranje vozilFahrzeug-HebebühnenElévateurs de véhiculesVehicle lifts53.020.99Druga dvigalna opremaOther lifting equipment43.180Diagnostic, maintenance and test equipmentICS:Ta slovenski standard je istoveten z:EN 1493:1998+A1:2008SIST EN 1493:1999+A1:2009en,fr01-marec-2009SIST EN 1493:1999+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1493:1998+A1
December 2008 ICS 43.180; 53.020.99 Supersedes EN 1493:1998English Version
Vehicle lifts
Elévateurs de véhicules
Fahrzeug-Hebebühnen This European Standard was approved by CEN on 10 July 1998 and includes Amendment 1 approved by CEN on 9 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1493:1998+A1:2008: ESIST EN 1493:1999+A1:2009
...