Intelligent transport systems - eSafety - eCall high level application requirements (HLAP)

In respect of pan-European eCall (operating requirements defined in EN 16072), this European
Standard defines the high level application protocols, procedures and processes required to provide
the eCall service using a TS12 emergency call over a mobile communications network.
NOTE 1 The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to
automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the
same quality of services objectives by using a PLMN (such as GSM and 3G) which supports the European
harmonised 112/E112 emergency number (TS12 ETSI TS 122 003) and to provide a means of manually
triggering the notification of an emergency incident.
NOTE 2 HLAP requirements for third party services supporting eCall can be found in EN 16102, and have
been developed in conjunction with the development of this work item, and is consistent in respect of the interface
to the PSAP. This deliverable makes reference to those provisions but does not duplicate them.

Intelligente Transportsysteme - Elektronische Sicherheit - Anforderungen an Notruf-Anwendungsprotokolle

Diese Europäische Norm legt die für den gesamteuropäischen eCall geltenden High-Level-Anwendungsprotokolle
(HLAP), Verfahrensweisen und Prozesse fest, die erforderlich sind, um den eCall-Dienst mit Hilfe eines
über ein Mobilfunknetz erfolgenden TS12-Notrufs zu erbringen.
ANMERKUNG 1 Das Ziel der Implementierung des gesamteuropäischen fahrzeuginternen Notrufsystems (eCall) besteht
darin, die Benachrichtigung über den Eintritt eines Verkehrsunfallereignisses europaweit mit denselben technischen
Normen und denselben Dienstgütezielen durch Nutzung eines PLMN (wie z. B. GSM oder 3G), welches die Europäische
harmonisierte 112/E112-Nutrufnummer (TS12 ETSI TS 122 003) unterstützt, zu automatisieren. Zusätzlich soll ein
Hilfsmittel für die manuelle Auslösung der Benachrichtigung über den Eintritt eines Notfalls zur Verfügung gestellt werden.
ANMERKUNG 2 HLAP-Anforderungen für „Drittparteiendienste, die eCall unterstützen“ sind dem Dokument „Drittparteiendienste,
die eCall unterstützen — Betriebsanforderungen“ (EN 16102) zu entnehmen, sobald dieses zur Verfügung
steht. Sie wurden im Zusammenhang mit dem vorliegenden Work Item entwickelt und sind im Hinblick auf die Schnittstelle
mit der PSAP widerspruchsfrei. Das vorliegende Dokument nimmt Bezug auf diese Vorgaben, enthält aber keine Wiederholungen.

Systèmes intelligents de transport - ESafety - Exigences HLAP pour l'eCall

Dans le cadre de l'appel d'urgence "pan-européen" (exigences opérationnelles définies dans l'EN 160702,
"Systèmes intelligents de transport - eCall - Exigences opérationnelles de l'appel d'urgence pan-européen"),
la présente Norme européenne définit les protocoles, procédures et processus d'application de haut niveau
requis pour la fourniture du service eCall en utilisant un appel d'urgence du TS12 via un réseau de
communication pour mobiles.
L'implémentation du système embarqué d'appel d'urgence pan-européen (eCall) a pour objectif d'automatiser
la notification d'un accident routier, quel que soit le lieu de cet accident en Europe, avec les mêmes critères
techniques et les mêmes objectifs de qualité de service en utilisant un réseau de communication pour mobiles
( moyen ETSI par exemple) qui prend en charge le numéro d'urgence 112/E112 harmonisé (TS12 ETSI TS
122 003), ainsi que de fournir un moyen pour déclencher manuellement la notification d'un incident
nécessitant une réponse rapide.
NOTE Les exigences HLAP relatives au service SFP-eCall sont spécifiées dans le document "Exigences
opérationnelles des services d'appel d'urgence de fournisseurs privés", et ont été développées conjointement au présent
document et de manière cohérente avec l'interface du PSAP. Le document susmentionné fait référence à ces dispositions
mais ne les expose pas dans le détail.
NOTE    Les exigences HLAP relatives au service SFP-eCall sont spécifiées dans le document "Exigences opérationnelles des services d'appel d'urgence de fournisseurs privés", et ont été développées conjointement au présent document et de manière cohérente avec l'interface du PSAP. Le document susmentionné fait référence à ces dispositions mais ne les expose pas dans le détail.

Inteligentni transportni sistemi - e-Varnost - Zahteve za visoko stopnjo prednosti aplikacijskega protokola elektronskega klica v sili (HLAP)

V skladu z vseevropskim elektronskim klicem (zahteve delovanja so določene v EN 16072) ta evropski standard določa visoko stopnjo prednosti aplikacijskih protokolov, postopkov in procesov, potrebnih za zagotavljanje storitve elektronskega klica z uporabo klica v sili TS12 prek omrežja mobilnih komunikacij.

General Information

Status
Withdrawn
Publication Date
13-Sep-2011
Withdrawal Date
21-Apr-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
22-Apr-2015

Relations

Buy Standard

Standard
EN 16062:2011
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Inteligentni transportni sistemi - e-Varnost - Zahteve za visoko stopnjo prednosti aplikacijskega protokola elektronskega klica v sili (HLAP)Intelligente Transportsysteme - eSicherheit - Anforderungen an Notruf-AnwendungsprotokolleSystèmes intelligents de transport - eSafety - Exigences HLAP pour l'eCallIntelligent transport systems - eSafety - eCall high level application requirements (HLAP)43.040.15Car informatics. On board computer systems35.240.60Uporabniške rešitve IT v transportu in trgoviniIT applications in transport and trade13.200NDWDVWURIAccident and disaster controlICS:Ta slovenski standard je istoveten z:EN 16062:2011SIST EN 16062:2011en01-november-2011SIST EN 16062:2011SLOVENSKI
STANDARD



SIST EN 16062:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16062
September 2011 ICS 03.220.20; 35.240.60 English Version
Intelligent transport systems - eSafety - eCall high level application requirements (HLAP)
Systèmes intelligents de transport - eSafety - Exigences HLAP pour l'eCall
Intelligente Transportsysteme - eSicherheit - Anforderungen an Notruf-Anwendungsprotokolle This European Standard was approved by CEN on 6 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16062:2011: ESIST EN 16062:2011



EN 16062:2011 (E) 2 Contents Page Foreword . 6Introduction . 71 Scope . 92 Conformance . 103 Normative references . 114 Terms and definitions . 135 Symbols and abbreviations . 166 General overview of the eCall transaction for pan-European eCall . 177 Requirements . 217.1 Procedures following power-up of the in-vehicle system . 217.1.1 General . 217.1.2 Enabled IVS . 217.1.3 Enabled PSAP . 217.1.4 IVS configured only for eCall . 217.1.5 Self test . 227.1.6 Standby mode applicable to IVS configured for eCall only .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.