iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 13130-8:1999

(Main)

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics

This Part of this European Prestandard describes a method for the determination of individual and total levels of residual isocyanates in plastics materials and articles.  This method is applicable to the analysis of polyurethane polymers. The total level of isocyanate monomers in materials and articles determined according to the procedure described in this prestandard is given in milligrams of NCO per kilogram of material or article.

Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln - Substanzen in Kunststoffen, die Beschränkungen unterliegen - Teil 8: Bestimmung von Isocyanaten in Kunststoffen

Dieser Teil dieser Europäischen Vornorm beschreibt ein Verfahren zur Bestimmung der Einzel- und Gesamtgehalte von Isocyanatresten in Werkstoffen und Gegenständen aus Kunststoff.  Dieses Verfahren gilt für die Analyse von Polyurethanpolymeren.  Der nach dem in dieser Vornorm beschriebenen Verfahren bestimmte Gesamtgehalt an Isocyanatmonomeren in Werkstoffen und Gegenständen wird in Milligramm NCO je Kilogramm Werkstoff oder Gegenstand angegeben.

Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques soumises à des limitations - Partie 8: Détermination des isocyanates dans les matières plastiques

La présente partie de cette prénorme européenne décrit une méthode de détermination des quantités individuelle et totale des isocyanates résiduels dans les matériaux et objets en matières plastiques.  Cette méthode d'essai s'applique à l'analyse des polymères de polyuréthane. La quantité totale des monomères d'isocyanates dans les matériaux et objets déterminée selon le mode opératoire décrit dans la présente partie de cette prénorme européenne est donnée en milligrammes de NCO par kilogramme de matériau ou objet.

Materiali in predmeti v stiku z živili - Snovi v plastičnih masah, katerih koncentracija je omejena - 8. del: Določevanje izocianatov v plastičnih masah

General Information

Status
Withdrawn
Publication Date
23-Mar-1999
Withdrawal Date
25-May-2004
ICS
67.250 - Materials and articles in contact with foodstuffs
Technical Committee
CEN/TC 194 - Utensils in contact with food
Drafting Committee
CEN/TC 194/SC 1/WG 2 - Methods of test for monomers
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-May-2004
Completion Date
26-May-2004
Directive
89/109/EEC - Materials and articles intended to come into contact with foodstuffs
Mandate
M/052 - Standardization mandate to CEN concerning methods of analysis for materials and articles intended to come into contact with foodstuffs
Ref Project
SIST ENV 13130-8:2000 - Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics

Relations

Replaced By
EN 13130-8:2004 - Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
Effective Date
22-Dec-2008

Buy Standard

ENV 13130-8:2000ENV 13130-8:2000
PreviousNext
Standardization document
ENV 13130-8:2000
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 13130-8:2000
01-april-2000
0DWHULDOLLQSUHGPHWLYVWLNX]åLYLOL6QRYLYSODVWLþQLKPDVDKNDWHULK
NRQFHQWUDFLMDMHRPHMHQDGHO'RORþHYDQMHL]RFLDQDWRYYSODVWLþQLKPDVDK
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation
- Part 8: Determination of isocyanates in plastics
Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln - Substanzen in Kunststoffen,
die Beschränkungen unterliegen - Teil 8: Bestimmung von Isocyanaten in Kunststoffen
Matériaux et objets en contact avec les denrées alimentaires - Matieres plastiques
soumises a des limitations - Partie 8: Détermination des isocyanates dans les matieres
plastiques
Ta slovenski standard je istoveten z: ENV 13130-8:1999
ICS:
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
SIST ENV 13130-8:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 13130-8:2000

---------------------- Page: 2 ----------------------

SIST ENV 13130-8:2000

---------------------- Page: 3 ----------------------

SIST ENV 13130-8:2000

---------------------- Page: 4 ----------------------

SIST ENV
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1186-2:2022(Main)
Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils
SIST EN 1186-2:2022

This document specifies methods for measuring overall migration of plastic materials and articles intended to come into contact with foodstuffs by contacting test specimens with vegetable oils at temperatures greater than or equal to 4 °C and less than or equal to 175 °C.
NOTE   Some vegetable oils are not suitable for use below 20 °C.
The overall migration from a sample of the plastics is determined as the loss in mass of non-volatile substances expressed:
- per unit surface area; or
- per kg of food simulant; or
- per article
after contact with a food simulant under defined conditions.
According to the type of materials or shape of articles, contact with the food simulant is carried out on a single surface (pouch, cell, filling) or by immersion.
This document does not cover the interpretation of the results which is expected to account for regulatory requirements.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1186-3:2022(Main)
Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants
SIST EN 1186-3:2022

This document specifies methods for measuring overall migration of plastic materials and articles intended to come into contact with foodstuffs by contacting test specimens with evaporable food simulants at temperatures greater than or equal to 4 °C and not exceeding the reflux temperature.
The overall migration from a sample of the plastics is determined as the loss in mass of non-volatile substances expressed:
- per unit surface area; or
- per kg of food simulant; or
- per article
after contact with a food simulant under defined conditions.
According to the type of materials or shape of articles, contact with the food simulant is carried out on a single surface (pouch, cell, filling) or by immersion.
This document does not cover the interpretation of the results which is expected to account for regulatory requirements.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8442-9:2018(Main)
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 9: Requirements for ceramic knives (ISO 8442-9:2018)
SIST EN ISO 8442-9:2018

ISO 8442-9:2018 specifies material and performance requirements and test method of ceramic blades of knives intended for use in the preparation of food.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15284:2007(Main)
Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
SIST EN 15284:2007

This European Standard specifies a method for the determination of the resistance to microwave heating of cookware made of ceramic, glass, glass-ceramic or plastics.
It is applicable to articles that are intended for multiple re-use in a microwave oven. It is not applicable to articles, particularly those made from plastics, which are intended to be discarded after one use.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15136:2006(Main)
Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants
SIST EN 15136:2006

This European standard describes a method for the determination of BADGE, BFDGE and their reaction products in food simulants: distilled water, 3 % w/v aqueous acetic acid, 10 % v/v aqueous ethanol solution and olive oil or sunflower oil.
A high performance liquid chromatography (HPLC) method is employed based on reversed phase HPLC and fluorescence detection.
The method is capable of determining BADGE and its derivatives at a minimum level of 0,05 µg/ml food simulant.
BFDGE and its derivatives can be determined at a minimum level of 0,1 µg/ml food simulant.
Direct HPLC analysis of the migration solutions may result in chromatograms difficult to interpret, due to interference from other components or the instability of the monomers resulting in a complex mixture of derivatives and/or reaction products. By forced hydrolysis of all epoxy groups and their reaction products, the quantification of the relevant substances is simplified and in addition the identities of the substances are indicatively confirmed.
NOTE   In this European standard the term “BADGE, BFDGE and their derivatives” refers to the substances listed in Directive 2002/16/EC. These substances are listed in 4.1.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8442-2:1997/AC:2006(Corrigendum)
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997)
SIST EN ISO 8442-2:1998/AC:2006

DIN - Modification to 7.1 b), translation error

  • Corrigendum
    7 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12875-5:2006(Main)
Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles
SIST EN 12875-5:2006

This European Standard specifies a rapid method for testing the dishwashing resistance of catering articles made of ceramics. It does not define the number of dishwashing cycles that any given product should withstand.  The method tests the dishwashing durability of the glaze surface of the ceramic articles.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12875-4:2006(Main)
Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles
SIST EN 12875-4:2006

This European Standard specifies a rapid method for testing the dishwashing resistance of ceramic articles intended for domestic use. It does not define the number of dishwashing cycles that any given product should withstand.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15137:2006(Main)
Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives
SIST EN 15137:2006

This European standard describes the determination of NOGE components with more than two aromatic rings (the two-ring NOGE is equal to BFDGE = Bis(2-hydroxyphenyl)methane bis(2,3-epoxypropyl)ether) and at least one epoxy group as well as their derivatives containing chlorohydrin functions and having a molecular mass less than 1000 Daltons in can coatings.
A high performance liquid chromatography (HPLC) method is employed based on reversed phase HPLC and fluorescence detection.
The method is capable of determining NOGE and its derivatives at a minimum level of 1 mg/ml in solution.
Direct HPLC analysis of the can coating extract may result in chromatograms difficult to interpret, due to interference from other components or the instability of the monomer resulting in a complex mixture of derivatives and/or reaction products. By forced hydrolysis of all epoxy groups and their reaction products, the quantification of the NOGE is simplified and the identities of the substances are indicatively confirmed.
NOTE   In this European standard the term “NOGE and its derivatives” refers to the requirements of Directive 2002/16/EC [1]. This includes NOGE components with more than two aromatic rings and at least one epoxy group as well as their derivatives containing chlorohydrin functions and having a molecular mass less than 1000 Daltons.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 13130-11:2005(Main)
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 11: Determination of 11-aminoundecanoic acid in food simulants
SIST-TS CEN/TS 13130-11:2005

This document, part of EN 13130, specifies a method for the determination of
11-aminoundecanoic acid in the food simulants water, 3 % w/v aqueous acetic acid, 15 % v/v aqueous ethanol, olive oil and iso-octane. The level of 11-aminoundecanoic acid determined is expressed as milligrams per kilogram of food simulant.
The method is appropriate for the quantitative determination of 11-amino-undecanoic acid in approximate analyte concentration range of 0,5 mg/kg to 10 mg/kg of food simulants.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day