EN ISO 10286:2015
(Main)Gas cylinders - Terminology (ISO 10286:2015)
Gas cylinders - Terminology (ISO 10286:2015)
ISO 10286:2015 gives the terminology for ISO/TC 58 standards intended to be used under regulations for the transport of dangerous goods that are based on the UN Model Regulations. Variations from the terminology are permissible to comply with other regulations such as for stationary and automotive applications.
Gasflaschen - Terminologie (ISO 10286:2015)
Bouteilles à gaz - Terminologie (ISO 10286:2015)
L'ISO 10286:2015 établit la terminologie pour les normes de l'ISO/TC 58 destinées à être utilisées dans le cadre de réglementations sur le transport, telles que le Livre orange de l'ONU. Il est permis de s'écarter de cette terminologie pour satisfaire à d'autres réglementations, comme pour les applications stationnaires et automobiles.
Plinske jeklenke - Terminologija (ISO 10286:2015)
Ta standard določa terminologijo za standarde ISO/TC 58, ki naj bi se uporabljali v skladu s predpisi za prevoz nevarnega blaga, ki temeljijo na vzorčnih predpisih ZN. Odstopanja od terminologije so dopustna za skladnost z drugimi predpisi, kot so predpisi za stacionarne in avtomobilske aplikacije.
OPOMBA: Poleg izrazov in definicij, uporabljenih v uradnih jezikih angleščini in francoščini, ta dokument navaja tudi enakovredne izraze v nemškem jeziku. Ti so objavljeni z odgovornostjo ustreznih organov ISO
za Nemčijo (DIN) in so informativne narave. Kot izrazi in definicije ISO se štejejo samo tisti, ki so v uradnih jezikih.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2015
1DGRPHãþD
SIST EN ISO 10286:2009
Plinske jeklenke - Terminologija (ISO 10286:2015)
Gas cylinders - Terminology (ISO 10286:2015)
Gasflaschen - Terminologie (ISO 10286:2015)
Bouteilles à gaz - Terminologie (ISO 10286:2015)
Ta slovenski standard je istoveten z: EN ISO 10286:2015
ICS:
01.040.23 7HNRþLQVNLVLVWHPLLQVHVWDYQL Fluid systems and
GHOL]DVSORãQRUDER 6ORYDUML components for general use
(Vocabularies)
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 10286
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 01.040.23; 23.020.30 Supersedes EN ISO 10286:2007
English Version
Gas cylinders - Terminology (ISO 10286:2015)
Bouteilles à gaz - Terminologie (ISO 10286:2015) Gasflaschen - Terminologie (ISO 10286:2015)
This European Standard was approved by CEN on 13 May 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10286:2015 E
worldwide for CEN national Members.
Contents Page
European foreword .3
European foreword
This document (EN ISO 10286:2015) has been prepared by Technical Committee ISO/TC 58 "Gas cylinders"
in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at
the latest by January 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10286:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10286:2015 has been approved by CEN as EN ISO 10286:2015 without any modification.
INTERNATIONAL ISO
STANDARD 10286
NORME
Fourth edition
Quatrième édition
INTERNATIONALE
2015-07-01
Gas cylinders — Terminology —
Bouteilles à gaz — Terminologie —
Gasflaschen — Terminologie —
Reference number
Numéro de référence
ISO 10286:2015(E/F)
©
ISO 2015
ISO 10286:2015(E/F)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2015
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Ch.de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse
ii © ISO 2015 – All rights reserved/Tous droits réservés
ISO 10286:2015(E/F)
Contents Page
Avant-propos . vi
Introduction . viii
1 Scope . 1
2 Pressure receptacles . 1
3 Accessories . 15
4 Materials, strength and stress . 25
5 Manufacture . 27
6 Testing and inspection . 31
7 Characteristics, properties and pressures . 39
Annex A (normative) Pressure system for pressure receptacles . 48
Bibliography . 49
Sommaire Page
Avant-propos . vi
Introduction . ix
1 Domaine d’application . 1
2 Récipients à pression . 1
3 Accesoires . 15
4 Matérieaux, résistance et contrainte . 25
5 Fabrication . 27
6 Essai et contrôle . 31
7 Caractéristiques, propriétés et pressions . 39
Annexe A (normative) Définitions relatives aux pressions pour les bouteilles à gaz. 48
Bibliographie . 49
ISO 10286:2015(E/F)
Inhalt Seite
Vorwort .vii
Einleitung .x
1 Anwendungsbereich .1
2 Druckgefäße .1
3 Ausrüstungsteile .15
4 Werkstoffe, Festigkeit und Spannung .25
5 Herstellung .27
6 Prüfung(en) und Inspektion .31
7 Merkmale, Eigenschaften und Drücke .39
Anhang A (normativ) Drucksystemdefinitionen für Druckgefäße .48
Literaturhinweise .49
iv © ISO 2015 – Tous droits réservés
ISO 10286:2015(E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. Int
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.