CEN ISO/TR 27165:2012

Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes (ISO/TR 27165:2012)

ISO/TR 27165:2012 provides definitions for wall constructions of thermoplastics pipes intended to be used in pressure and non-pressure pipe applications. It takes into account as far as possible already existing definitions in published product standards and gives guidance for a common text when drafting new deliverables or revising existing ones.

Rohrleitungssysteme aus thermoplastischen Kunststoffen - Anleitung für die Benennung der Wandkonstruktionen thermoplastischer Rohre (ISO/TR 27165:2012)

Systèmes de canalisations thermoplastiques - Lignes directrices pour les définitions relatives à la construction des parois de tubes (ISO/TR 27165:2012)

Cevni sistemi iz polimernih materialov - Navodilo za definicijo strukture sten za cevi (ISO/TR 27165:2012)

To tehnično poročilo zagotavlja definicijo strukture sten termoplastičnih cevi, ki je namenjena za uporabo pri tlačnih in breztlačnih ceveh. V čim večji meri upošteva že obstoječe definicije v objavljenih standardih za izdelke in daje navodila za običajno besedilo pri pripravi osnutka novih izsledkov ali spreminjanju obstoječih.

General Information

• Status: Published
• Publication Date: 14-Oct-2012
• ICS: 01.040.23 - Fluid systems and components for general use (Vocabularies)
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Oct-2012
• Due Date: 05-Nov-2013
• Completion Date: 15-Oct-2012
• Ref Project: SIST-TP CEN ISO/TR 27165:2012 - Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes (ISO/TR 27165:2012)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 27165:2012
01-december-2012
Cevni sistemi iz polimernih materialov - Navodilo za definicijo strukture sten za
cevi (ISO/TR 27165:2012)
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
(ISO/TR 27165:2012)
Rohrleitungssysteme aus thermoplastischen Kunststoffen - Anleitung für die Benennung
der Wandkonstruktionen thermoplastischer Rohre (ISO/TR 27165:2012)
Systèmes de canalisations thermoplastiques - Lignes directrices pour les définitions
relatives à la construction des parois de tubes (ISO/TR 27165:2012)
Ta slovenski standard je istoveten z: CEN ISO/TR 27165:2012
ICS:
83.140.30 Cevi, fitingi in ventili iz Plastics pipes, fittings and
polimernih materialov valves
SIST-TP CEN ISO/TR 27165:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN ISO/TR 27165:2012

---------------------- Page: 2 ----------------------

SIST-TP CEN ISO/TR 27165:2012


TECHNICAL REPORT
CEN ISO/TR 27165

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
October 2012
ICS 23.040.20; 91.140.60
English Version
Thermoplastics piping systems - Guidance for definitions of wall
constructions for pipes (ISO/TR 27165:2012)
Systèmes de canalisations thermoplastiques - Lignes Rohrleitungssysteme aus thermoplastischen Kunststoffen -
directrices pour les définitions relatives à la construction Anleitung für die Benennung der Wandkonstruktionen
des parois de tubes (ISO/TR 27165:2012) thermoplastischer Rohre (ISO/TR 27165:2012)


This Technical Report was approved by CEN on 8 October 2012. It has been drawn up by the Technical Committee CEN/TC 155.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 27165:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN ISO/TR 27165:2012
CEN ISO/TR 27165:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST-TP CEN ISO/TR 27165:2012
CEN ISO/TR 27165:2012 (E)
Foreword
This document (CEN ISO/TR 27165:2012) has been prepared by Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems", the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 138 "Plastics pipes, fittings and valves for the transport of fluids".
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
3

---------------------- Page: 5 ----------------------

SIST-TP CEN ISO/TR 27165:2012

---------------------- Page: 6 ----------------------

SIST-TP CEN ISO/TR 27165:2012
TECHNICAL ISO/TR
REPORT 27165
First edition
2012-10-15
Thermoplastics piping systems —
Guidance for definitions of wall
constructions for pipes
Systèmes de canalisations thermoplastiques — Lignes directrices pour
les définitions relatives à la construction des parois de tubes
Reference number
ISO/TR 27165:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST-TP CEN ISO/TR 27165:2012
ISO/TR 27165:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------

SIST-TP CEN ISO/TR 27165:2012
ISO/TR 27165:2012(E)
Contents Page
Foreword .iv
Introduction .
...