CLC/TS 61496-3:2003

Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)

Specifies additional requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery, employing active opto-electronic protective devices responsive to diffuse reflection (AOPDDRs) for the sensing function.

Sicherheit von Maschinen - Berührungslos wirkende Schutzeinrichtungen - Teil 3: Besondere Anforderungen an aktive optoelektronische diffuse Reflektion nutzende Schutzeinrichtungen (AOPDDR)

Sécurité des machines - Equipements de protection électro-sensibles - Partie 3: Prescriptions particulières pour les équipements utilisant des dispositifs protecteurs opto-électroniques actifs sensibles aux réflexions diffuses (AOPDDR)

Définit les prescriptions supplémentaires de conception, deconstruction et dessais déquipements de protection électro-sensibles (ESPE) pour la sécurité des machines, utilisant pour la fonction de détection des systèmes actifs optoélectroniques sensibles aux réflexions diffuses (AOPDDR).

Varnost strojev – Električno občutljiva zaščitna oprema – 3. del: Posebne zahteve za aktivne optoelektronske zaščitne elemente, ki se odzivajo na difuzni odboj (IEC 61496-3:2001)

General Information

• Status: Withdrawn
• Publication Date: 15-Dec-2003
• ICS: 13.110 - Safety of machinery
• ICS: 29.260 - Electrical equipment for working in special conditions
• Technical Committee: CLC/TC 44X - Safety of machinery: electrotchnical aspects
• Drafting Committee: IEC/TC 44 - IEC_TC_44
• Parallel Committee: IEC/TC 44 - IEC_TC_44
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-May-2008
• Completion Date: 23-May-2008
• Ref Project: SIST-TS CLC/TS 61496-3:2005 - Safety of machinery - Electro-sensitive protective equipment -- Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)

Relations

• Replaced By: CLC/TS 61496-3:2008 - Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
• Effective Date: 28-Jan-2023
• Revises: EN 61496-3:2001 - Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST-TS CLC/TS 61496-3:2005

STANDARD
december 2005
Varnost strojev – Električno občutljiva zaščitna oprema – 3. del: Posebne
zahteve za aktivne optoelektronske zaščitne elemente, ki se odzivajo na
difuzni odboj (IEC 61496-3:2001)
Safety of machinery – Electro-sensitive protective equipment – Part 3: Particular
requirements for Active Opto-electronic Protective Devices responsive to Diffuse
Reflection (AOPDDR) (IEC 61496-3:2001)
ICS 13.110; 31.260 Referenčna številka
SIST-TS CLC/TS 61496-3:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION CLC/TS 61496-3
SPECIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION December 2003

ICS 13.110; 29.260 Supersedes EN 61496-3:2001


English version


Safety of machinery –
Electro-sensitive protective equipment
Part 3: Particular requirements for
Active Opto-electronic Protective Devices
responsive to Diffuse Reflection (AOPDDR)
(IEC 61496-3:2001)


Sécurité des machines – Sicherheit von Maschinen –
Equipements de protection Berührungslos wirkende
électro-sensibles Schutzeinrichtungen
Partie 3: Prescriptions particulières Teil 3: Besondere Anforderungen an
pour les équipements utilisant des aktive optoelektronische diffuse
dispositifs protecteurs opto-électroniques Reflektion nutzende Schutzeinrichtungen
actifs sensibles aux réflexions diffuses (AOPDDR)
(AOPDDR) (IEC 61496-3:2001)
(CEI 61496-3:2001)





This Technical Specification was approved by CENELEC on 2003-12-02.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to
make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting
national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. CLC/TS 61496-3:2003 E

---------------------- Page: 2 ----------------------

CLC/TS 61496-3:2003 - 2 -
Foreword
The text of the International Standard IEC 61496-3:2001, prepared by IEC TC 44, Safety of
machinery - Electrotechnical aspects, was approved by CENELEC as CLC/TS 61496-3 on 2003-12-02
without any modification.
This Technical Specification supersedes EN 61496-3:2001.
The following date was fixed:
– latest date by which the existence of the CLC/TS
has to be announced at national level (doa) 2004-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61496-3:2001 was approved by CENELEC as a Technical
Specification without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - CLC/TS 61496-3:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This Technical Specification incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this Technical Specification only when incorporated in it by amendment
or revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60068-2-14 1984 Environmental testing EN 60068-2-14 1999
Part 2: Tests - Test N: Change of
temperature

IEC 60068-2-75 1997 Part 2-75: Tests - Test Eh: Hammer EN 60068-2-75 1997
tests

IEC 60825-1 1993 Safety of laser products EN 60825-1 1994
Part 1: Equipment classification, + corr. February 1995
requirements and user's guide

IEC 61496-1 1997 Safety of machinery - Electro-sensitive EN 61496-1 1997
protective equipment
Part 1: General requirements and tests

– – High-visibility warning clothing EN 471 1994

__________


1)
EN 60068-2-14 includes A1:1986 to IEC 60068-2-14.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
61496-3
INTERNATIONAL
Pre
...