High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics

Specifies a test method for the non-electrical characteristics of the surface mounted device inductors to be used for electronic and telecommunication equipment. Defines methods for measuring mechanical performance only. To be used in conjunction with EN 62211.

Induktive Hochfrequenzbauelemente - Nichtelektrische Eigenschaften und Messmethoden - Teil 2: Messverfahren für nichtelektrische Eigenschaften

Composants inductifs à haute fréquence - Caractéristiques non électriques et méthodes de mesure - Partie 2: Méthodes d'éssai pour caractéristiques non électriques

Spécifie une méthode d'essai pour les caractéristiques non électriques pour inductances à montage en surface utilisées pour les équipements électroniques et de télécommunications. Concerne uniquement les méthodes de mesure de la performance mécanique. Est à utiliser conjointement avec la EN 62211.

Visokofrekvenčne induktivne komponente – Neelektrične karakteristike in merilne metode – 2. del: Preskusne metode za neelektrične karakteristike (IEC 62025-2:2005)

General Information

Status
Withdrawn
Publication Date
27-Feb-2005
Withdrawal Date
31-Jan-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Oct-2022
Completion Date
25-Oct-2022

Relations

Buy Standard

Standard
EN 62025-2:2005
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 62025-2:2005

STANDARD
december 2005
Visokofrekvenčne induktivne komponente – Neelektrične karakteristike in
merilne metode – 2. del: Preskusne metode za neelektrične karakteristike (IEC
62025-2:2005)
High frequency inductive components – Non-electrical characteristics and
measuring methods – Part 2: Test methods for non-electrical characteristics (IEC
62025-2:2005)
ICS 29.100.10 Referenčna številka
SIST EN 62025-2:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 62025-2
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2005

ICS 29.100.10


English version


High frequency inductive components –
Non-electrical characteristics and measuring methods
Part 2: Test methods for non-electrical characteristics
(IEC 62025-2:2005)


Composants inductifs à haute fréquence - Induktive Hochfrequenzbauelemente -
Caractéristiques non électriques Nichtelektrische Eigenschaften
et méthodes de mesure und Messmethoden
Partie 2: Méthodes d'éssai pour Teil 2: Messverfahren für nichtelektrische
caractéristiques non électriques Eigenschaften
(CEI 62025-2:2005) (IEC 62025-2:2005)






This European Standard was approved by CENELEC on 2005-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62025-2:2005 E

---------------------- Page: 2 ----------------------

EN 62025-2:2005 - 2 -
Foreword
The text of document 51/797/FDIS, future edition 1 of IEC 62025-2, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62025-2 on 2005-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62025-2:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62025-2:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance

IEC 60068-2-6 1995 Part 2: Tests - Test Fc: Vibration
+ corr. March 1995 (sinusoidal) EN 60068-2-6 1995

2)
IEC 60068-2-20 1979 Part 2: Tests - Test T: Soldering HD 323.2.20 S3 1988

IEC 60068-2-21 1999 Part 2-21: Tests - Test U: Robustness of EN 60068-2-21 1999
terminations and integral mounting
devices

IEC 60068-2-27 1987 Part 2: Tests - Test Ea and guidance: EN 60068-2-27 1993
Shock

IEC 60068-2-45 1980 Part 2: Tests - Test Xa and guidance: EN 60068-2-45 1992
Immersion in cleaning solvents

IEC 60068-2-58 2004 Part 2-58: Tests - Test Td: Test methods EN 60068-2-58 2004
for solderability, resistance to dissolution + corr.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.