Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

This European Standard applies to emission and immunity aspects of EMC for electrical and electronic apparatus and systems intended for use in railway fixed installations for power supply. This includes the power feed to the apparatus, the apparatus itself with its protective control circuits, trackside items such as switching stations, power autotransformers, booster transformers, substation power switchgear and power switchgear to other longitudinal and local supplies. Filters operating at railway system voltage (for example, for harmonic suppression or power factor correction) are not included in this standard since each site has special requirements. Filters would normally have separate enclosures with separate rules for access. If electromagnetic limits are required, these will appear in the specification for the equipment. The limits in this standard do not apply to intentional communication signals. The frequency range considered is from DC to 400 GHz. No measurements need to be performed at frequencies where no requirement is specified. Emission and immunity limits are given for items of apparatus which are situated: a) within the boundary of a substation which delivers electric power to a railway; b) beside the track for the purpose of controlling or regulating the railway power supply, including power factor correction; c) along the track for the purpose of supplying electrical power to the railway other than by means of the conductors used for contact current collection, and associated return conductors. Included are high voltage feeder systems within the boundary of the railway which supply substations at which the voltage is reduced to the railway system voltage; d) beside the track for controlling or regulating electric power supplies to ancillary railway uses. This category includes power supplies to marshalling yards, maintenance depots and stations; e) various other non-traction power supplies from railway sources which are shared with railway traction. The immunity levels given in this standard apply for - vital equipment such as protection devices; - equipment having connections to the traction power conductors; - apparatus inside 3 m zone; - ports of apparatus inside 10 m zone with connection inside 3 m zone; - ports of apparatus inside 10 m zone with cable length > 30 m. Apparatus and systems which are in an environment which can be described as residential, commercial or light industry, even when placed within the physical boundary of the railway substation, shall comply with the relevant generic European EMC standard. Excluded from the immunity requirements of this standard is power supply apparatus which is intrinsically immune to the tests defined in Tables 1 to 6 of this standard. NOTE An example is an 18 MVA 230 kV to 25 kV power supply transformer. These specific provisions are to be used in conjunction with the general provisions in EN 50121 1. This part of the standard covers requirements for both apparatus and fixed installations. The sections for fixed installations are not relevant for CE marking.

Bahnanwendungen - Elektromagnetische Verträglichkeit - Teil 5: Störaussendungen und Störfestigkeit von ortsfesten Anlagen und Einrichtungen der Bahnenergieversorgung

Applications ferroviaires - Compatibilité électromagnétique - Partie 5: Emission et immunité des installations fixes d'alimentation de puissance et des équipements associés

La présente Norme Européenne s’applique aux aspects d’émission et d’immunité de CEM pour les appareils et les systèmes électriques et électroniques destinés à être utilisés dans les installations fixes associées à l’alimentation. Cela concerne l’alimentation des appareils, les appareils eux-mêmes avec leurs circuits de commande de protection, les composants au bord des voies tels que les stations de sectionnement, les autotransformateurs, les transformateurs suceurs, les appareillages de coupure de sous-station et les appareillages de coupure d’autres alimentations longitudinales et locales. Les filtres qui fonctionnent à la tension du système ferroviaire (par exemple, pour la suppression d’harmoniques ou la correction de facteur de puissance) ne sont pas inclus dans la présente Norme dans la mesure où chaque site répond à des exigences spéciales. Normalement, les filtres sont dans des enceintes séparées avec des règles d’accès particulières. Si des limites électromagnétiques sont nécessaires, elles apparaîtront dans la spécification pour l’équipement. Les limites de la présente Norme ne s’appliquent pas aux signaux de communication intentionnels. La plage de fréquences concernée va du courant continu à 400 GHz. Aucune mesure n’est nécessaire aux fréquences pour lesquelles aucune exigence n’est spécifiée. Les limites d’émission et d’immunité sont données pour les composants des appareils qui sont situés: a) dans les limites de la sous-station qui alimente le réseau de traction en électricité; b) près des voies pour contrôler et réguler l’alimentation électrique du réseau de traction, y compris la correction de facteur de puissance; c) le long de la voie pour fournir de l’énergie électrique au système ferroviaire par d’autres moyens que les conducteurs utilisés pour le captage du courant de contact et les conducteurs de retour associés. Ceci englobe les systèmes d’alimentation à haute tension dans les limites du système ferroviaire qui alimentent les sous-stations dans lesquelles la tension est ramenée à la valeur de la tension du système ferroviaire; d) près des voies pour contrôler et réguler les alimentations électriques utilisées à différents usages ferroviaires auxiliaires. Cette catégorie englobe les alimentations des installations de triage, des dépôts de maintenance et des gares; e) différentes alimentations qui ne concernent pas la traction alimentées par une des sources ferroviaires qui sont partagées avec la traction ferroviaire. Les niveaux d’immunité donnés dans la présente Norme s'appliquent aux - équipements vitaux tels que les dispositifs de protection; - équipements dotés de raccordements vers les conducteurs de puissance de traction; - appareils situés dans la zone de 3 m; - accès des appareils situés dans la zone de 10 m avec connexion dans la zone de 3 m; - accès des appareils situés dans la zone de 10 m avec longueur de câble > 30 m. Les appareils et les systèmes qui sont dans un environnement qui peut être décrit comme résidentiel, commercial ou d’industrie légère, même s’ils sont situés dans les limites physiques de la sous-station ferroviaire, doivent être conformes à la norme générique européenne CEM applicable. Les appareils d’alimentation qui ont une immunité intrinsèque aux essais définis aux Tableaux 1 à 6 de la présente Norme sont exclus des exigences relatives à l’immunité de la présente Norme. NOTE Un transformateur 18 MVA 230 kV / 25 kV en est un exemple. Ces dispositions spécifiques doivent être utilisées avec les dispositions générales données dans l'EN 50121 1. La présente Partie de la Norme couvre à la fois des exigences pour les appareils et les installations fixes. Les sections pour les installations fixes ne sont pas applicables au marquage CE.

Železniške naprave - Elektromagnetna združljivost - 5. del: Sevanje in odpornost stabilnih močnostnih napajalnih inštalacij in naprav

General Information

Status
Withdrawn
Publication Date
26-Mar-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Feb-2020
Completion Date
06-Feb-2020

Relations

Buy Standard

Standard
EN 50121-5:2015
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2015
äHOH]QLãNHQDSUDYH(OHNWURPDJQHWQD]GUXåOMLYRVWGHO6HYDQMHLQRGSRUQRVW
VWDELOQLKPRþQRVWQLKQDSDMDOQLKLQãWDODFLMLQQDSUDY
Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity of
fixed power supply installations and apparatus
Bahnanwendungen - Elektromagnetische Verträglichkeit -- Teil 5: Störaussendungen
und Störfestigkeit von ortsfesten Anlagen und Einrichtungen der Bahnenergieversorgung
Applications ferroviaires - Compatibilité électromagnétique -- Partie 5: Emission et
immunité des installations fixes d'alimentation de puissance et des équipements
associés
Ta slovenski standard je istoveten z: EN 50121-5:2015
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
45.020 Železniška tehnika na Railway engineering in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50121-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 29.280; 33.100.01; 45.020 Supersedes EN 50121-5:2006
English Version
Railway applications - Electromagnetic compatibility - Part 5:
Emission and immunity of fixed power supply installations and
apparatus
Applications ferroviaires - Compatibilité électromagnétique - Bahnanwendungen - Elektromagnetische Verträglichkeit -
Partie 5: Emission et immunité des installations fixes Teil 5: Störaussendungen und Störfestigkeit von ortsfesten
d'alimentation de puissance et des équipements associés Anlagen und Einrichtungen der Bahnenergieversorgung
This European Standard was approved by CENELEC on 2015-01-05. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50121-5:2015 E
Contents
Foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 8
4 Performance criteria . 8
5 Emission tests and limits . 8
5.1 Emission from the substation to the outside world . 8
5.2 Emission test for apparatus operating at less than 1 000 V rms AC . 9
5.3 Emission values within the boundary of the substation . 9
6 Immunity tests and limits . 9
7 Fixed power supplies on railway property which are not used for railway traction purposes . 16
Annex A (informative) Emission within the boundary of the substation for normal operation and
during the operation of switches . 17
Annex ZZ (informative) Coverage of Essential Requirements of EU Directives . 20
Bibliography . 21

- 3 - EN 50121-5:2015
Foreword
This document (EN 50121-5:2015) has been prepared by CLC/TC 9X: “Electrical and electronic
applications for railways”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2016-01-05
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2018-01-05
conflicting with this document have to
be withdrawn
This document supersedes EN 50121-5:2006.
EN 50121-5:2006:
- clarification of scope (Clause 1);
- set dated normative references (Clause 2);
- emission requirement extended in the frequency range 1 GHz to 6 GHz following EN 61000-6-4;
- immunity requirement extended in the frequency range 5,1 GHz to 6 GHz;
- removal of limits for radiated H-fields in the frequency range 9 kHz to 150 kHz due to the fact that:
- there are very few outside world victims;
- there is low reproducibility.
This European Standard is to be read in conjunction with EN 50121-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
This standard forms Part 5 of the European Standard series EN 50121, published under the general
title “Railway applications - Electromagnetic compatibility”. The series consists of:
− Part 1: General
− Part 2: Emission of the whole railway system to the outside world
− Part 3-1: Rolling stock - Train and complete vehicle
− Part 3-2: Rolling stock - Apparatus

− Part 4: Emission and immunity of the signalling and telecommunications apparatus
− Part 5: Emission and immunity of fixed power supply installations and apparatus

- 5 - EN 50121-5:2015
Introduction
The requirements of this standard have been specified so as to ensure a level of electromagnetic
emission which will cause minimal disturbance to other equipment. The levels, however, do not cover
the following cases:
a) which may occur with an extremely low probability of occurrence in any location;
b) where highly susceptible apparatus will be used in close proximity of the equipment covered by
this standard, in which case further measures may have to be taken.
The emission limits given are on the basis that the equipment of the product family range is installed in
railway substation areas.
1 Scope
This European Standard applies to emission and immunity aspects of EMC for electrical and electronic
apparatus and systems intended for use in railway fixed installations for power supply. This includes
the power feed to the apparatus, the apparatus itself with its protective control circuits, trackside items
such as switching stations, power autotransformers, booster transformers, substation power
switchgear and power switchgear to other longitudinal and local supplies.
Filters operating at railway system voltage (for example, for harmonic suppression or power factor
correction) are not included in this standard since each site has special requirements. Filters would
normally have separate enclosures with separate rules for access. If electromagnetic limits are
required, these will appear in the specification for the equipment.
The limits in this standard do not apply to intentional communication signals.
The frequency range considered is from DC to 400 GHz. No measurements need to be performed at
frequencies where no requirement is specified.
Emission and immunity limits are given for items of apparatus which are situated:
a) within the boundary of a substation which delivers electric power to a railway;
b) beside the track for the purpose of controlling or regulating the railway power supply, including
power factor correction;
c) along the track for the purpose of supplying electrical power to the railway other than by means of
the conductors used for contact current collection, and associated return conductors. Included are
high voltage feeder systems within the boundary of the railway which supply substations at which
the voltage is reduced to the railway system voltage;
d) beside the track for controlling or regulating electric power supplies to ancillary railway uses. This
category includes power supplies to marshalling yards, maintenance depots and stations;
e) various other non-traction power supplies from railway sources which are shared with railway
traction.
The immunity levels given in this standard apply for
- vital equipment such as protection devices;
- equipment having connections to the traction power conductors;
- apparatus inside the 3 m zone;
- ports of apparatus inside the 10 m zone with connection inside the 3 m zone;
- ports of apparatus inside the 10 m zone with cable length > 30 m.
Apparatus and systems which are in an environment which can be described as residential,
commercial or light industry, even when placed within the physical boundary of the railway substation,
shall comply with the relevant generic European EMC standard.
Excluded from the immunity requirements of this standard is power supply apparatus which is
intrinsically immune to the tests defined in Tables 1 to 6 of this standard.
NOTE An example is an 18 MVA 230 kV to 25 kV power supply transformer.

- 7 - EN 50121-5:2015
These specific provisions are to be used in conjunction with the general provisions in EN 50121-1.
This part of the standard covers requirements for both apparatus and fixed installations. The sections
for fixed installations are not relevant for CE marking.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 50121-1:2015, Railway applications - Electromagnetic compatibility - Part 1: General
EN 50121-2:2015, Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole
railway system to the outside world
EN 61000-4-2:2009, Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test (IEC 61000-4-2:2008)
EN 61000-4-3:2006, Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006)
EN 61000-4-4:2004, Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test (IEC 61000-4-4:2004)
EN 61000-4-5:2006, Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement
techniques - Surge immunity test (IEC 61000-4-5:2005)
EN 61000-4-6:2009, Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-
6:2008)
EN 61000-4-8:2010, Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement
techniques - Power frequency magnetic field immunity test (IEC 61000-4-8:2009)
EN 61000-4-12:2006, Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement
techniques - Ring wave immunity test (IEC 61000-4-12:2006)
EN 61000-6-4:2007, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments (IEC 61000-6-4:2006)
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1.1
apparatus
electric or electronic product with an intrinsic function intended for implementation into a fixed railway
installation
3.1.2
environment
surrounding objects or region which may influence the behaviour of the system and or may be
influenced by the system
3.1.3
railway substation
installation, the main function of which is to supply a contact line system at which the voltage of a
primary supply system, and in some cases
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.