EN 60747-5-2:2001

Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics

Gives the essential ratings and characteristics of the following categories or subcategories of optoelectronic devices which are not intended to be used in the field of fibre optic systems or subsystems: Semiconductor photoemitters, semiconductor photoelectric detectors, semiconductor photosensitive devices, and semiconductor devices utilizing the optical radiation for internal operation.

Einzel-Halbleiterbauelemente und integrierte Schaltungen - Teil 5-2: Optoelektronische Bauelemente - Wesentliche Grenz- und Kennwerte

Dispositifs discrets à semiconducteurs et circuits intégrés - Partie 5-2: Dispositifs optoélectroniques - Valeurs limites et caractéristiques essentielles

Donne les valeurs limites et caractéristiques essentielles des catégories et sous-catégories suivantes de dispositifs optoélectroniques qui ne sont pas destinés à être utilisés dans le domaine des systèmes et sous-systèmes à fibres optiques: Photoémetteurs à semiconducteurs, détecteurs photoélectriques à semiconducteurs, dispositifs photosensibles à semiconducteurs et dispositifs à semiconducteurs utilisant le rayonnement optique pour leur fonctionnement interne.

Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics (IEC 60747-5-2:1997)

General Information

• Status: Withdrawn
• Publication Date: 02-Jul-2001
• Withdrawal Date: 31-Dec-2003
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CLC/SR 47E - Discrete semiconductor devices
• Drafting Committee: IEC/TC 110 - IEC_TC_110
• Parallel Committee: IEC/TC 110 - IEC_TC_110
• Ref Project: SIST EN 60747-5-2:2002 - Discrete semiconductor devices and integrated circuits -- Part 5-2: Optoelectronic devices - Essential ratings and characteristics

Relations

• Amended By: EN 60747-5-2:2001/A1:2002 - Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2002
Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic
devices - Essential ratings and characteristics (IEC 60747-5-2:1997)
Discrete semiconductor devices and integrated circuits -- Part 5-2: Optoelectronic
devices - Essential ratings and characteristics
Einzel-Halbleiterbauelemente und integrierte Schaltungen -- Teil 5-2: Optoelektronische
Bauelemente - Wesentliche Grenz- und Kennwerte
Dispositifs discrets à semiconducteurs et circuits intégrés -- Partie 5-2: Dispositifs
optoélectroniques - Valeurs limites et caractéristiques essentielles
Ta slovenski standard je istoveten z: EN 60747-5-2:2001
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
31.200 Integrirana vezja, Integrated circuits.
mikroelektronika Microelectronics
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60747-5-2
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2001
ICS 31.260
English version
Discrete semiconductor devices and integrated circuits
Part 5-2: Optoelectronic devices -
Essential ratings and characteristics
(IEC 60747-5-2:1997)
Dispositifs discrets à semiconducteurs et Einzel-Halbleiterbauelemente und
circuits intégrés integrierte Schaltungen
Partie 5-2: Dispositifs optoélectroniques - Teil 5-2: Optoelektronische Bauelemente -
Valeurs limites et caractéristiques Wesentliche Grenz- und Kennwerte
essentielles (IEC 60747-5-2:1997)
(CEI 60747-5-2:1997)
This European Standard was approved by CENELEC on 2000-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60747-5-2:2001 E
Foreword
The text of the International Standard IEC 60747-5-2:1997, prepared by SC 47C, Flat panel display
devices, of IEC TC 47, Semiconductor devices, was submitted to the Unique Acceptance Procedure
and was approved by CENELEC as EN 60747-5-2 on 2000-12-01 without any modification.
This standard should be read jointly with IEC 60747-1, EN 62007-1 and EN 62007-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-01-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes B and ZA are normative and annex A is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60747-5-2:1997 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 60747-5-2:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60065 (mod) 1985 Safety requirements for mains operated EN 60065 1993
electronic and related apparatus for
household and similar general use
IEC 60068-2-1 1990 Environmental testing EN 60068-2-1 1993
Part 2: Tests - Tests A: Cold
2)
IEC 60068-2-2 1974 Part 2: Tests - Test B: Dry heat HD 323.2.2 S1 1988
3)
IEC 60068-2-3 1969 Part 2: Tests - Test Ca: Damp heat, HD 323.2.3 S2 1987
steady state
IEC 60068-2-6 1995 Part 2: Tests - Test Fc: Vibration EN 60068-2-6 1995
+ corr. March 1995 (sinusoidal)
4)
IEC 60068-2-14 1984 Part 2: Tests - Test N: Change of EN 60068-2-14 1999
temperature
IEC 60068-2-17 1994 Part 2: Tests - Test Q: Sealing EN 60068-2-17 1994
IEC 60068-2-27 1987 Part 2: Tests - Test Ea and guidance: EN 60068-2-27 1993
Shock
5)
IEC 60068-2-30 1980 Part 2: Tests - Test Db and guidance: EN 60068-2-30 1999
Damp heat, cyclic (12 + 12 hour cycle)
IEC 60306-1 1969 Measurement of photosensitive devices--
Part 1: Basic recommendations
1)
EN 60065:1993 is superseded by EN 60065:1998 + corrigendum Jun. 1999, which is based on IEC 60065:1998
(mod.).
2)
EN 60068-2-2 includes supplement A:1976 to IEC 60068-2-2.
3)
HD 323.2.3 S2:1987 includes A1:1984 to IEC 60068-2-3.
4)
EN 60068-2-14:1999 includes A1:1986 to IEC 60068-2-14.
5)
EN 60068-2-30:1999 includes A1:1985 to IEC 60068-2-30.

Publication Year Title EN/HD Year
IEC 60664-1 1992 Insulation coordination for equipment HD 625.1 S1 1996
(mod) within low-voltage systems + corr. November 1996
Part 1: Principles, requirements and
tests
IEC 60695-2-2 1991 Fire hazard testing EN 60695-2-2 1994
Part 2: Test methods -- Section 2:
Needle-flame test
IEC 60747-5-1 1997 Discrete semiconductor devices and EN 60747-5-1 2001
integrated circuits
Part 5-1: Optoelectronic devices -
General
IEC 60747-5-3 1997 Part 5-3: Optoelectronic devices - EN 60747-5-3 2001
Measuring methods
NORME
CEI
INTERNATIONALE
IEC
60747-5-2
INTERNATIONAL
Première édition
STANDARD
First edition
1997-09
Dispositifs discrets à semiconducteurs
et circuits intégrés –
Partie 5-2:
Dispositifs optoélectroniques –
Valeurs limites et caractéristiques essentielles
Discrete semiconductor devices
and integrated circuits –
Part 5-2:
Optoelectronic devices –
Essential ratings and characteristics
© IEC 1997 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
U
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60747-5-2 © IEC:1997 – 3 –
CONTENTS
Page
FOREWORD . 7
Clause
1 Scope. 9
2 Normative references. 9
3 Light-emitting diodes
(excluding devices for fibre optic systems or subsystems) . 11
3.1 Type. 11
3.2 Semiconductor material. 11
3.3 Colour. 11
3.4 Details of outline and encapsulation . 11
3.5 Limiting values (absolute maximum system) . 11
3.6 Electrical characteristics. 13
3.7 Supplementary information. 13
4 Infrared-emitting diodes
(excluding devices for fibre optic systems or subsystems) . 13
4.1 Type. 15
4.2 Semiconductor material. 15
4.3 Details of outline and encapsulation . 15
4.4 Limiting values (absolute maximum system). 15
4.5 Electrical characteristics. 15
4.6 Supplementary information. 17
5 Photodiodes
(excluding devices for fibre optic systems or subsystems) . 17
5.1 Type. 17
5.2 Semiconductor material. 17
5.3 Details of outline and encapsulation . 17
5.4 Limiting values (absolute maximum system). 19
5.5 Electrical characteristics. 19
5.6 Supplementary information. 19
6 Phototransistors
(excluding devices for fibre optic systems or subsystems) . 21
6.1 Type. 21
6.2 Semiconductor material. 21
6.3 Polarity. 21
6.4 Details of outline and encapsulation . 21
6.5 Limiting values (absolute maximum system). 21
6.6 Electrical characteristics. 23
6.7 Supplementary information. 25

60747-5-2 © IEC:1997 – 5 –
Clause Page
7 Photocouplers, optocouplers
(with output transistor) . 25
7.1 Type. 25
7.2 Semiconductor material. 25
7.3 Polarity of the output resistor . 25
7.4 Details of outline and encapsulation . 25
7.5 Limiting values (absolute maximum system). 25
7.6 Electrical characteristics. 29
7.7 Supplementary information. 31
8 Photocouplers (optocouplers) providing protection against electrical shock . 31
8.1 Type. 31
8.2 Semiconductor material. 31
8.3 Details of outline and encapsulation . 31
8.4 Ratings. 31
8.5 Electrical characteristics. 31
8.6 Electrical, environmental and/or endurance test information (supplementary
information) . 33
9 Laser diodes. 41
9.1 Type. 41
9.2 Semiconductor. 41
9.3 Details of outline and encapsulation . 41
9.4 Limiting values (absolute maximum system). 41
9.5 Electrical and optical characteristics.
...