iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 22074-1:2024

(Main)

Railway infrastructure - Rail fastening systems - Part 1: Vocabulary (ISO 22074-1:2020)

Railway infrastructure - Rail fastening systems - Part 1: Vocabulary (ISO 22074-1:2020)

This document specifies the terms and definitions used in the ISO 22074 series of standards related to
rail fastening systems.
NOTE In this document, there are some entries where more than one term is listed in the header (e.g. sleeper,
tie, cross tie in 3.2.3). In such cases, the first term is the preferred term, generally used in the ISO 22074 series of
standards. The other terms are also in common use in the railway industry and are considered to be synonymous
(admitted terms).

Bahninfrastruktur - Schienenbefestigungssysteme - Teil 1: Begriffe und Definitionen (ISO 22074-1:2020)

Es gibt keine normativen Verweisungen in diesem Dokument.

Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 1: Vocabulaire (ISO 22074-1:2020)

Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 1. del: Slovar (ISO 22074-1:2020)

Ta dokument določa izraze in definicije iz skupine standardov ISO 22074 v zvezi s
sistemi za pritrjevanje tirnic.
OPOMBA: V tem dokumentu je nekaj vnosov, kjer je v naslovu navedenih več izrazov (npr. prag, nosilni element, švelar v točki 3.2.3). V teh primerih ima prednost prvi izraz, ki se splošno uporablja v skupini standardov ISO 22074. Drugi izrazi so prav tako v splošni rabi v železničarski panogi in veljajo za sinonime (dovoljeni izrazi).

General Information

Status
Published
Public Enquiry End Date
31-Jan-2024
Publication Date
15-Apr-2024
ICS
01.040.45 - Railway engineering (Vocabularies)
45.080 - Rails and railway components
Technical Committee
IŽNP - Reilway applications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Apr-2024
Due Date
14-Jun-2024
Completion Date
16-Apr-2024
Ref Project
EN ISO 22074-1:2024 - Railway infrastructure - Rail fastening systems - Part 1: Vocabulary (ISO 22074-1:2020)

Buy Standard

EN ISO 22074-1:2024EN ISO 22074-1:2024
PreviousNext
Standard
EN ISO 22074-1:2024
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
prEN ISO 22074-1:2024prEN ISO 22074-1:2024
PreviousNext
Draft
prEN ISO 22074-1:2024
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22074-1:2024
01-maj-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 1. del: Slovar (ISO 22074-
1:2020)
Railway infrastructure - Rail fastening systems - Part 1: Vocabulary (ISO 22074-1:2020)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 1: Begriffe und Definitionen (ISO
22074-1:2020)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 1: Vocabulaire (ISO 22074
-1:2020)
Ta slovenski standard je istoveten z: EN ISO 22074-1:2024
ICS:
01.040.45 Železniška tehnika (Slovarji) Railway engineering
(Vocabularies)
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN ISO 22074-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22074-1:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 22074-1:2024


EN ISO 22074-1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2024
EUROPÄISCHE NORM
ICS 01.040.45; 45.080
English Version

Railway infrastructure - Rail fastening systems - Part 1:
Vocabulary (ISO 22074-1:2020)
Infrastructure ferroviaire - Systèmes de fixation du rail Bahninfrastruktur - Schienenbefestigungssysteme -
- Partie 1: Vocabulaire (ISO 22074-1:2020) Teil 1: Begriffe und Definitionen (ISO 22074-1:2020)
This European Standard was approved by CEN on 23 March 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22074-1:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22074-1:2024
EN ISO 22074-1:2024 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22074-1:2024
EN ISO 22074-1:2024 (E)
European foreword
The text of ISO 22074-1:2020 has been prepared by Technical Committee ISO/TC 269 “Railway
applications” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22074-1:2024 by Technical Committee CEN/TC 256 “Railway applications” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 22074-1:2020 has been approved by CEN as EN ISO 22074-1:2024 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 22074-1:2024

------------------
...

SLOVENSKI STANDARD
oSIST prEN ISO 22074-1:2024
01-januar-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 1. del: Slovar (ISO 22074-
1:2020)
Railway infrastructure - Rail fastening systems - Part 1: Vocabulary (ISO 22074-1:2020)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 1: Begriffe und Definitionen (ISO
22074-1:2020)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 1: Vocabulaire (ISO 22074
-1:2020)
Ta slovenski standard je istoveten z: prEN ISO 22074-1
ICS:
01.040.45 Železniška tehnika (Slovarji) Railway engineering
(Vocabularies)
45.080 Tračnice in železniški deli Rails and railway
components
oSIST prEN ISO 22074-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 22074-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 22074-1:2024
INTERNATIONAL ISO
STANDARD 22074-1
First edition
2020-08
Railway infrastructure — Rail
fastening systems —
Part 1:
Vocabulary
Infrastructure ferroviaire — Systèmes de fixation du rail —
Partie 1: Vocabulaire
Reference number
ISO 22074-1:2020(E)
©
ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 22074-1:2024
ISO 22074-1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 22074-1:2024
ISO 22074-1:2020(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Application of standards. 1
3.2 Track system . 2
3.3 Fastening system . 3
3.4 Fastening component . 4
3.5 Characteristics of fastenings . 5
© ISO 2020 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 22074-1:2024
ISO 22074-1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13232-1:2023(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 1: Definitions
EN 13232-1:2023

This European Standard provides an accepted "terminology" for switch and crossing work. With the assistance of diagrams, the various components are given definitions, and these specific names are regarded as obligatory.
The definitions cover the constituent parts and design geometry of switch and crossing work, and include the movement of switches. Additional terminology of a more specific nature will be defined in the relevant part of the series.
The present definitions set out the terms most generally used for the geometrical form and the construction of switches and crossings, omitting those of too special a nature.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13232-1:2014(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 1: Definitions
prEN 13232-1

This European Standard provides an accepted "terminology" for switch and crossing work. With the assistance of diagrams, the various components are given definitions, and these specific names are regarded as obligatory.
The definitions cover the constituent parts and design geometry of switch and crossing work, and include the movement of switches. Additional terminology of a more specific nature will be defined in the relevant part of the series.
The present definitions set out the terms most generally used for the geometrical form and the construction of switches and crossings, omitting those of too special a nature.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13232-1:2023(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 1: Definitions
EN 13232-1:2023

This European Standard provides an accepted "terminology" for switch and crossing work. With the assistance of diagrams, the various components are given definitions, and these specific names are regarded as obligatory.
The definitions cover the constituent parts and design geometry of switch and crossing work, and include the movement of switches. Additional terminology of a more specific nature will be defined in the relevant part of the series.
The present definitions set out the terms most generally used for the geometrical form and the construction of switches and crossings, omitting those of too special a nature.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13232-1:2014(Main)
Railway applications - Track - Switches and crossings for Vignole rails - Part 1: Definitions
prEN 13232-1

This European Standard provides an accepted "terminology" for switch and crossing work. With the assistance of diagrams, the various components are given definitions, and these specific names are regarded as obligatory.
The definitions cover the constituent parts and design geometry of switch and crossing work, and include the movement of switches. Additional terminology of a more specific nature will be defined in the relevant part of the series.
The present definitions set out the terms most generally used for the geometrical form and the construction of switches and crossings, omitting those of too special a nature.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6185-3:2024(Main)
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2024)
EN ISO 6185-3:2024

This document specifies the minimum safety characteristics required for the design, materials, manufacture and testing of inflatable boats and rigid inflatable boats with a length of the hull LH in accordance with ISO 8666 less than 8 m with a motor power rating of 15 kW and greater.
This document is applicable to the following types of boats intended for use within the operating temperatures of –20 °C to +60 °C:
—     Type VII: Powered boats, fitted with a buoyancy tube on the port and starboard sides, suitable for navigation in conditions of design categories C and D.
—     Type VIII: Powered boats, fitted with a buoyancy tube on the port and starboard sides, suitable for navigation in conditions of design category B.
This document excludes single-chambered boats and boats with tubes made from unsupported materials, and does not apply to aquatic toys and inflatable liferafts.
Boats with tubes made from aluminium, roto-moulded polyethylene, fibre reinforced plastic or other rigid materials are excluded from this document.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28139:2021/A1:2024(Amendment)
Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods - Amendment 1 (ISO 28139:2019/Amd 1:2024)
EN ISO 28139:2021/A1:2024
  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17821:2023/AC:2024(Corrigendum)
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
EN 17821:2023/AC:2024

This document specifies:
- general construction, performance and material requirements for Frost Resistant Taps for outdoor use (FRT), PN 10.
- the application in the potable water installation with a static pressure of maximum 1,0 MPa (10 bar) and a distribution temperature of maximum 25 °C (PWC).
FRT valves shall consist of the 3 areas shown in Figure 1.
The conditions of use are according to the following Table 1.
The requirements with regard to the potable water quality are specified in national regulations.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21068-1:2024(Main)
Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 1: General information, terminology and sample preparation (ISO 21068-1:2024)
EN ISO 21068-1:2024

This part of ISO 21068 gives definitions and specifies techniques for the preparation of samples for the chemical analysis of silicon-carbide-containing raw materials and refractory products including:
a)   SiC raw materials;
b)   graphite brick containing silicon carbide;
c)   silicon carbide brick (includes the bricks containing silicon nitride, silicon oxynitride, sialon);
d)   refractories containing carbon and/or silicon carbide mixed with clay;
e)   refractories containing carbon and/or silicon carbide mixed with silica (and fused silica);
f)   refractories containing carbon and/or silicon carbide mixed with high alumina material;
g)   refractories containing carbon and/or silicon carbide mixed with magnesia (and dolomite);
h)   refractories containing carbon and/or silicon carbide mixed with chrome mineral or magnesia-chrome materials;
i)   refractories containing carbon and/or silicon carbide except those described in a) to g) above.
The items of chemical analysis described in ISO 21068, Parts 1 to 4 are as follows:
1)   loss on drying (LOD);
2)   loss on ignition (LOI);
3)   total carbon, Ctotal;
4)   free carbon, Cfree;
5)   silicon carbide, SiC;
6)   free silicon (Sifree);
7)   free aluminium (Alfree);
8)   free magnesium (Mgfree);
9)   free iron (Fefree);
10)   silicon(IV) dioxide (SiO2);
11)   aluminium oxide (Al2O3);
12)   iron(III) oxide (total iron oxide calculated as Fe2O3);
13)   titanium(IV) oxide (TiO2);
14)   calcium oxide (CaO);
15)   magnesium oxide (MgO);
16)   sodium oxide (Na2O);
17)   potassium oxide (K2O);
18)   chromium(III) oxide (Cr2O3);
19)   zirconium oxide (ZrO2);
20)   boron oxide (total boron calculated as B2O3);
21)   nitrogen;
22)   oxygen;
23)   nitrides (undifferentiated: Si3N4, AlN, BN, sialon, oxy-nitrides, etc.);
24)   XRD-methods.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1570-1:2024(Main)
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 1570-1:2024

1.1   This document specifies the safety requirements for lifting tables with the following properties:
-   serving no more than 2 fixed landings but are able to pass a fixed landing and,
-   having a vertical travel speed of no more than 0,15 m/s, unless safe by position and,
-   for raising or lowering goods (with or without operator(s) and/or authorised person(s)), or;
-   for raising or lowering operator(s) and/or authorised person(s) with or without goods, to positions where they can carry out work from a fixed or movable lifting table that is guided throughout its vertical travel only.
1.2   This document deals with all significant hazards pertinent, with the exception of noise, to lifting tables when used as intended and under the conditions foreseen by the manufacturer (see List of Hazards, Annex B). This document specifies the appropriate technical measures for eliminating and reducing the risks arising from the significant hazards.
1.3   This document does not apply to the following equipment:
-   lifting tables with a vertical travel speed exceeding 0,15 m/s, unless safe by position;
-   lifting tables, serving more than 2 fixed landings of a construction, for lifting goods, with a vertical travel speed not exceeding 0,15 m/s (EN 1570-2);
-   lifting tables, serving more than 2 fixed landings of a construction, for lifting operators, with a vertical travel speed not exceeding 0,15 m/s;
-   lifting tables carrying operators and installed in full enclosures with a vertical travel speed not exceeding 0,15 m/s;
-   lifting tables used on ships;
-   lifting tables designed for artists and stage set features during artistic performances;
-   power operated lifting platforms for persons with impaired mobility (EN 81-41);
-   mobile lifting tables for airport ground support equipment (EN 1915-2 and EN 12312-1);
-   lifting tables which are designed as part of a lift according to Directive (95/16/EC);
-   mobile elevating work platforms (EN 280);
-   static Group B elevating work platforms (EN 280);
-   vehicle servicing lifts (EN 1493);
-   mobile lifting tables used for firefighting (EN 1777);
-   mobile lifting tables with a horizontal travelling speed of more than 1,6 m/s;
-   rail dependent storage and retrieval equipment (EN 528);
-   scissor lift pallet trucks (EN ISO 3691-5);
-   lifting tables suspended from a ceiling.
1.4   This document does not consider the additional requirements for:
-   electromagnetic compatibility;
-   operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres, mines);
-   handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, particularly brittle loads, loose loads (gravel, tubes));
-   hazards occurring during construction, transportation and disposal;
-   equipment installed on the load platform or the replacing or maintaining of it;
-   integration into broader systems or other machines, etc.;
-   cable-less controls;
-   lifting tables where the hydraulic pressure is derived directly from gas pressure;
-   lifting tables powered by internal combustion engines.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12625-16:2024(Main)
Tissue paper and tissue products - Part 16: Determination of optical properties - Diffuse reflectance method for opacity (paper backing) (ISO 12625-16:2024)
EN ISO 12625-16:2024

ISO 12625-16:2015 specifies the testing procedures for the instrumental determination of the opacity of tissue paper or tissue products by diffuse reflectance using a paper backing.
ISO 12625-16:2015 contains specific instructions for the preparation of test pieces of single-ply and multi-ply products, where special preparation/procedures might be necessary.
It can be used to determine the opacity of tissue paper and tissue products containing fluorescent whitening agents, provided the UV content of the radiation incident on the test piece has been adjusted to conform to that in the CIE illuminant C using a fluorescent reference standard provided by an authorized laboratory as described in ISO 2470-1.
ISO 12625-16:2015 is not applicable to coloured tissue paper and tissue products which incorporate fluorescent dyes or pigments.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day