SIST EN 16783:2017
(Main)Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
This European Standard provides the product category rules (PCR) for Type III environmental declarations (according to EN 15804) for factory made and in situ thermal insulation products.
In addition to EN 15804, the PCR described in this European Standard:
- specifies the declared unit to be used;
- defines the default system boundaries for thermal insulation products;
- specifies/describes the default scenarios and rules for defining scenarios for each of the life cycle information modules A-D. (provides guidance for the determination of the reference service life (RSL) for thermal insulation products) ;
- specifies the way of declaring and reporting in the context of the product Standard.
This PCR is intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessment, provided the intention is properly stated in the system boundary description.
Wärmedämmstoffe - Produktkategorieregeln (PCR) für werkmäßig hergestellte und an der Verwendungsstelle hergestellte Wärmedämmstoffe zur Erstellung von Umweltproduktdeklarationen
Diese Europäische Norm stellt Produktkategorieregeln (PCR, en: product category rules) für Umweltdeklarationen des Typs III (nach EN 15804) bei werkmäßig hergestellten Wärmedämmstoffen und Ortdämmstoffen bereit.
Ergänzend zu EN 15804 leisten die in dieser Europäischen Norm ausgeführten PCR Folgendes:
sie legen die zu verwendende deklarierte Einheit fest;
sie bestimmen die Systemgrenzen für Wärmedämmstoffe;
Standardszenarien und Regeln zur Festlegung von Szenarien für bestimmte Lebenszyklus-Informationsmodule werden bestimmt und beschrieben.
Diese PCR sind unter der Voraussetzung, dass der Zweck innerhalb der Beschreibung der Systemgrenzen exakt angegeben ist, dafür vorgesehen, für die Bewertungen „von der Wiege bis zum Werktor“, „von der Wiege bis zum Werktor mit Optionen“ und „von der Wiege bis zur Bahre“ verwendet zu werden.
Produits isolants thermiques - Règles régissant les catégories de produits (RCP) pour les produits manufacturés et formés en place, destinées à la préparation des déclarations environnementales des produits
La présente Norme européenne fournit les règles régissant les catégories de produits (RCP) pour les déclarations environnementales de Type III (comme dans l’EN 15804) des produits isolants thermiques manufacturés et formés en place.
En complément de l’EN 15804, les RCP décrites dans la présente Norme européenne :
- spécifient l’unité déclarée à utiliser ;
- définissent les frontières du système pour les produits isolants thermiques ;
- spécifient/décrivent les scénarios par défaut et les règles relatives à l’élaboration de scénarios pour certaines modules d’informations du cycle de vie.
Ces RCP sont destinées à être utilisées pour l’évaluation allant du berceau à la sortie de l’usine, du berceau à la sortie de l’usine avec options ou du berceau à la tombe, à condition que l’intention soit dûment mentionnée dans la description des frontières du système.
Toplotnoizolacijski proizvodi - Pravila za kategorije proizvodov za proizvode, izdelane v obratu in na mestu vgradnje, za pripravo okoljskih deklaracij za proizvode
Ta evropski standard zagotavlja pravila za kategorije proizvodov (PCR) za okoljske deklaracije tipa III (v skladu s standardom EN 15804) za toplotnoizolacijske proizvode, izdelane v obratu in na mestu vgradnje.
Poleg standarda EN 15804 pravila za kategorije proizvodov, opisane v tem evropskem standardu:
– določajo navedeno enoto, ki naj bi se uporabljala;
– opredeljujejo privzete sistemske meje za toplotnoizolacijske proizvode;
– določajo/opisujejo privzete scenarije in pravila za opredelitev scenarijev za vsak informacijski modul življenjske dobe A–D (zagotavljajo navodila za določevanje referenčne življenjske dobe (RSL) za toplotnoizolacijske proizvode);
– določajo način označevanja in poročanja v okviru standarda za proizvod.
Ta pravila za kategorije proizvodov se uporabljajo za ocenjevanje faze izdelave »od zibelke do vrat«, »od zibelke do vrat z možnostmi« ali »od zibelke do groba«, če je namera jasno navedena v opisu meja sistema.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi - Pravila za kategorije proizvodov za proizvode, izdelane v obratu in na mestu vgradnje, za pripravo okoljskih deklaracij za proizvodeWärmedämmstoffe - Produktkategorieregeln (PCR) für werkmäßig hergestellte und an der Verwendungsstelle hergestellte Wärmedämmstoffe zur Erstellung von UmweltproduktdeklarationenProduits isolants thermiques - Règles régissant les catégories de produits (RCP) pour les produits manufacturés et formés en place, destinées à la préparation des déclarations environnementales des produitsThermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations91.120.10Toplotna izolacija stavbThermal insulation of buildingsICS:Ta slovenski standard je istoveten z:EN 16783:2017SIST EN 16783:2017en,fr,de01-junij-2017SIST EN 16783:2017SLOVENSKI
STANDARD
SIST EN 16783:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16783
April
t r s y ICS
{ sä s t rä s r English Version
Thermal insulation products æ Product category rules næsitu formed products for preparing environmental product declarations Produits isolants thermiques æ Règles régissant les manufacturés et formés en placeá destinées à la préparation des déclarations environnementales des produits werkmäßig hergestellte und an der Verwendungsstelle hergestellte Wärmedämmstoffe zur Erstellung von Umweltproduktdeklarationen This European Standard was approved by CEN on
s x January
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x y z uã t r s y ESIST EN 16783:2017
EN 16783:2017 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Symbols and abbreviations . 5 5 General aspects . 6 5.1 Objective of the
complementary PCR for insulation products . 6 5.2 Types of EPD with respect to life cycle stages covered . 6 5.3 Comparability of EPD for construction products . 8 5.4 Additional information . 8 5.5 Ownership, responsibility and liability for the EPD . 8 5.6 Communication formats . 8 6 Product Category Rules for LCA .
...
SLOVENSKI STANDARD
oSIST prEN 16783:2014
01-november-2014
Toplotnoizolacijski proizvodi - Pravila za kategorije proizvodov za proizvode,
izdelane v obratu in na mestu vgradnje, za pripravo okoljskih deklaracij za
proizvode
Thermal insulation products - Product category rules (PCR) for factory made and in-situ
formed products for preparing environmental product declarations
Wärmedämmstoffe - Produktkategorieregeln (PCR) für werkmäßig hergestellte und an
der Verwendungsstelle hergestellte Wärmedämmstoffe zur Erstellung von
Umweltproduktdeklarationen
Produits isolants thermiques - Règles régissant les catégories de produits (RCP) pour
les produits manufacturés et formés en place, destinées à la préparation des
déclarations environnementales des produits
Ta slovenski standard je istoveten z: prEN 16783
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation
oSIST prEN 16783:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16783:2014
---------------------- Page: 2 ----------------------
oSIST prEN 16783:2014
EUROPEAN STANDARD
DRAFT
prEN 16783
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2014
ICS 91.120.10
English Version
Thermal insulation products - Product category rules (PCR) for
factory made and in-situ formed products for preparing
environmental product declarations
Produits isolants thermiques - Règles régissant les Wärmedämmstoffe - Produktkategorieregeln (PCR) für
catégories de produits (RCP) pour les produits werkmäßig hergestellte und an der Verwendungsstelle
manufacturés et formés en place, destinées à la hergestellte Wärmedämmstoffe zur Erstellung von
préparation des déclarations environnementales des Umweltproduktdeklarationen
produits
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16783:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16783:2014
prEN 16783:2014 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .4
2 Normative references .4
3 Terms and definitions .6
4 Symbols and abbreviations .7
5 General aspects .7
5.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.