SIST ETS 300 073 E1:2003

• Abstract:

  T/TE 06-02

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.160.99 - Other audio, video and audiovisual equipment
• ICS: 35.100.60 - Presentation layer
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI ETS 300 073 ed.1 (1990-11) - Videotex presentation layer data syntax; Geometric Display (CEPT Recommendation T/TE 06-02, Edinburgh 1988)

SIST ETS 300 073 E1:2003 is the Slovenian adoption of ETS 300 073 Edition 1, a European Telecommunications Standard from ETSI for Videotex presentation layer data syntax for Geometric Display. It is based on CEPT Recommendation T/TE 06-02 (Edinburgh 1988) and was approved by ETSI without modification. In practice, it is a reference for implementing and aligning videotex presentation-layer syntax for geometric display services.

What does SIST ETS 300 073 E1:2003 specify?

SIST ETS 300 073 E1:2003 specifies the Videotex presentation layer data syntax for Geometric Display. The foreword shows that ETSI adopted the CEPT text as an ETS without changing it, so the document serves as the standardized reference for that syntax rather than a rewritten national variant.

The standard is part of an integrated package of videotex ETSs. That matters because implementers usually need the geometric display syntax together with the related protocol, processable data and identifier documents.

Companion ETS named in the foreword	What it covers
prETS 300 072	Terminal Equipment; Videotex presentation layer protocol
prETS 300 074	Videotex presentation layer data syntax transparent data
prETS 300 075	Terminal Equipment (TE); Videotex processable data
prETS 300 076	Terminal Equipment (TE); Videotex Terminal Facility Identifier (TFI)
ETS 300 073	Videotex presentation layer data syntax; Geometric Display

The front matter also records the document history as the first edition and notes a later conversion to PDF.

What are the key terms in SIST ETS 300 073 E1:2003?

SIST ETS 300 073 E1:2003 uses a small set of terms that frame the subject of the standard.

• Videotex - the service family named by the standard and its companion package.
• Presentation layer - the layer named in the title where the specified data syntax applies.
• Geometric Display - the display case covered by this standard.
• Terminal Equipment (TE) - the equipment category used in the companion videotex standards.
• Terminal Facility Identifier (TFI) - the identifier named in one of the companion standards.

These terms matter because they tell readers which part of the videotex chain the standard addresses: the presentation-side syntax for display behavior, not general system operation.

Who uses SIST ETS 300 073 E1:2003?

SIST ETS 300 073 E1:2003 is used by people working on videotex systems and terminal equipment. That includes telecom engineers, terminal designers, system integrators, and standards or conformance teams that need a common reference for geometric display syntax.

It is also relevant for organizations comparing related videotex specifications, because the foreword places this document in a coordinated five-part ETSI package. For buyers and technical reviewers, that helps determine whether this is the right document when the task is to implement or verify geometric display behavior.

Which standards are used with SIST ETS 300 073 E1:2003?

The foreword names the companion videotex standards that sit alongside SIST ETS 300 073 E1:2003. These are the documents to check when a project needs more than the geometric display syntax alone.

Standard named in the foreword	Contribution
prETS 300 072	Presentation layer protocol for Terminal Equipment
prETS 300 074	Transparent data syntax at the presentation layer
prETS 300 075	Processable data for Terminal Equipment
prETS 300 076	Terminal Facility Identifier (TFI)

Together, these standards show the wider videotex framework around this document. In practice, that helps an implementer choose the matching companion text for protocol handling, data handling, or identifier handling.

What does the SIST ETS 300 073 E1:2003 document contain?

The document presents the ETSI-adopted text of CEPT Recommendation T/TE 06-02, plus the front matter needed to identify and track the publication. The visible material includes the copyright notice, a short note inviting comments on editorial accuracy, the foreword, and the document history.

For a reader, that means the page is primarily a formal standards record for the videotex geometric display syntax. It shows provenance, edition status, and the related ETS package so the standard can be matched with the right companion documents.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RPHWULþQLVideotex presentation layer data syntax; Geometric Display (CEPT Recommendation T/TE 06-02, Edinburgh 1988)35.100.60Predstavitveni slojPresentation layer33.160.99Druga avdio, video in avdiovizuelna opremaOther audio, video and audiovisual equipmentICS:Ta slovenski standard je istoveten z:ETS 300 073 Edition 1SIST ETS 300 073 E1:2003en01-december-2003SIST ETS 300 073 E1:2003SLOVENSKI
STANDARD
EUROPEANETS 300 073TELECOMMUNICATIONNovember 1990STANDARDICS:33.020Key words:VideotexVideotex presentation layer data syntaxGeometric Display(CEPT Recommendation T/TE 06-02, Edinburgh 1988)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1990. All rights reserved.SIST ETS 300 073 E1:2003

Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 073 E1:2003

0ForewordThe text of the CEPT Recommendation T/TE 06-02 (Edinburgh 1988) was approved by the EuropeanTelecommunications Standards Institute (ETSI) as a European Telecommunication Standard (ETS)without any modification.This ETS was recommended for endorsement by the Terminal Equipment (TE) Technical Committee ofETSI in May 1990 as part of an integrated package of 5 ETSs covering various aspects of videotex whichcomprises:Final draft prETS 300 072Terminal Equipment;Videotex presentation layer protocolVideotex presentation data layer syntaxFinal draft prETS 300 074Videotex presentation layer data syntax transparent data(CEPT Recommendation T/TE 06-03, Edinburgh 1988)Final draft prETS 300 075Terminal Equipment (TE);Videotex processable dataFinal draft prETS 300 076Terminal Equipment (TE);VideotexTerminal Facility Identifier (TFI)SIST ETS 300 073 E1:2003

SIST ETS 300 073 E1:200
...