iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60300-1:2002

(Main)

Dependability management -- Part 1: Dependability programme management

Dependability management -- Part 1: Dependability programme management

Gives the essential features of a comprehensive dependability programme for the planning, organization, direction and control of resources to produce products which will be reliable and maintainable.

Zuverlässigkeitsmanagement -- Teil 1: Management für Zuverlässigkeitsprogramme

Gestion de la sûreté de fonctionnement -- Partie 1: Gestion du programme de sûreté de fonctionnement

Donne les caractéristiques essentielles d'un programme de sûreté de fonctionnement détaillé pour la planification, l'organisation, la direction et la maîtrise des ressources pour réaliser des produits qui seront fiables et maintenables.

Dependability management - Part 1: Dependability programme management (IEC 60300-1:1993)

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
16-Dec-2009
ICS
03.120.01 - Quality in general
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
I11 - Imaginarni 11
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Dec-2009
Due Date
03-Jan-2010
Completion Date
17-Dec-2009
Ref Project
EN 60300-1:1993 - Dependability management - Part 1: Dependability programme management

Relations

Replaced By
SIST EN 60300-1:2004 - Dependability management -- Part 1: Dependability management systems
Effective Date
06-May-2014
Replaced By
SIST EN 60300-1:2004 - Dependability management -- Part 1: Dependability management systems
Effective Date
28-Jan-2023
Replaced By
SIST EN 60300-1:2004 - Dependability management -- Part 1: Dependability management systems
Effective Date
07-Jun-2022

Buy Standard

EN 60300-1:2002EN 60300-1:2002
PreviousNext
Standard
EN 60300-1:2002
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60300-1:2002
01-september-2002
Dependability management - Part 1: Dependability programme management (IEC
60300-1:1993)
Dependability management -- Part 1: Dependability programme management
Zuverlässigkeitsmanagement -- Teil 1: Management für Zuverlässigkeitsprogramme
Gestion de la sûreté de fonctionnement -- Partie 1: Gestion du programme de sûreté de
fonctionnement
Ta slovenski standard je istoveten z: EN 60300-1:1993
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN 60300-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60300-1:2002

---------------------- Page: 2 ----------------------

SIST EN 60300-1:2002

---------------------- Page: 3 ----------------------

SIST EN 60300-1:2002

---------------------- Page: 4 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61124:2023(Main)
Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2023)
EN IEC 61124:2023

This International Standard gives a number of optimized test plans, the corresponding border lines and characteristics. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans.
This standard specifies procedures to test whether an observed value of
- failure rate,
- failure intensity,
- mean operating time to failure (MTTF),
- mean operating time between failures (MTBF),
conforms to a given requirement.
It is assumed, except where otherwise stated, that during the accumulated test time, the times to failure or the operating times between failures are independent and identically exponentially distributed. This assumption implies that the failure rate or failure intensity is assumed to be constant.
Four types of test plans are described as follows:
- truncated sequential probability ratio test (SPRT);
- fixed time/failure terminated test (FTFT);
- fixed calendar time terminated test without replacement;
- combined test.
This standard does not cover guidance on how to plan, perform, analyse and report a test. This information can be found in IEC 60300-3-5.
This standard does not describe test conditions. This information can be found in IEC 60605-2 and in IEC 60300-3-5.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60300-3-4:2022(Main)
Dependability management - Part 3-4: Application guide - Specification of dependability requirements (IEC 60300-3-4:2022)
EN IEC 60300-3-4:2022

This part of IEC 60300 gives guidance on specifying dependability requirements and collating
these requirements in a specification, together with a list of the means of assuring the
achievement of the dependability requirements.
The guidance provided includes:
• specifying quantitative and qualitative reliability, maintainability, supportability and
availability requirements;
• advising acquirers on how to ensure that the requirements can be fulfilled by suppliers;
• advising suppliers to help them meet the acquirer's requirements.
Other obligations, such as legislation and governmental regulations, can also place
requirements on items, in addition to any requirements derived in accordance with this
document.
Whilst mainly addressing system and equipment level dependability, many of the techniques
described in the various dependability related IEC standards can also be applied to products or
at the component level. The term "item" is used throughout this document.
This guidance is given in a basic project context where an acquirer obtains an item from a
supplier. It can be modified and adapted to other situations as needed.
NOTE 1 This document does not directly consider safety and environment specifications although much of the
guidance in this document could also be applied to them.
NOTE 2 This document does not cover items with special multi-stakeholder long-term arrangements (e.g. services
provided through Public-Private Partnership procurements) and how dependability is specified in such arrangements.
NOTE 3 The guidance in this document can be applied to some aspects of the specification of requirements relating
to software but specific guidance can be found in IEC 62628 [5] and the different parts of the IEC 61508 series [6].

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61163-2:2020(Main)
Reliability stress screening - Part 2: Components (IEC 61163-2:2020)
EN IEC 61163-2:2020

IEC 61163-2 provides guidance on RSS techniques and procedures for electrical,electronic, and mechanical components. This document is procedural in nature and is not, andcannot be, exhaustive with respect to component technologies due to the rapid rate ofdevelopments in the component industry.This document is:a) intended for component manufacturers as a guideline;b) intended for component users as a guideline to negotiate with component manufacturers onRSS requirements;c) intended to allow the planning of an RSS process in house to meet reliability requirementsor to allow the re-qualification of components for specific, upgraded, environments;d) intended as a guideline to sub-contractors who provide RSS as a service.This document is not intended to provide test plans for specific components or for delivery ofcertificates of conformance for batches of components.The use of bi-modal Weibull analysis to select and optimize an RSS process without having toestimate the reliability and life time of all items is described.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61123:2020(Main)
Reliability testing - Compliance test plans for success ratio (IEC 61123:2019)
EN IEC 61123:2020

EN-IEC 61123 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the assumption that the probability of success or failure is the same from trial to trial (statistically independent events). Plans for fixed trial/failure terminated tests as well as truncated sequential probability ratio tests (SPRTs) are included. This document contains extensive tables with ready-to-use SPRT plans and their characteristics for equal and non-equal risks for supplier and customer. In the case of the reliability compliance tests for constant failure rate/intensity, IEC 61124 applies.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60812:2018(Main)
Failure modes and effects analysis (FMEA and FMECA) (IEC 60812:2018)
EN IEC 60812:2018

This document explains how failure modes and effects analysis (FMEA), including the failure
modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented
and maintained.
The purpose of failure modes and effects analysis (FMEA) is to establish how items or
processes might fail to perform their function so that any required treatments could be
identified. An FMEA provides a systematic method for identifying modes of failure together
with their effects on the item or process, both locally and globally. It may also include
identifying the causes of failure modes. Failure modes can be prioritized to support decisions
about treatment. Where the ranking of criticality involves at least the severity of
consequences, and often other measures of importance, the analysis is known as failure
modes, effects and criticality analysis (FMECA).
This document is applicable to hardware, software, processes including human action, and
their interfaces, in any combination.
An FMEA can be used in a safety analysis, for regulatory and other purposes, but this being a
generic standard, does not give specific guidance for safety applications.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62853:2018(Main)
Open systems dependability (IEC 62853:2018)
EN IEC 62853:2018

This document provides guidance in relation to a set of requirements placed upon system life
cycles in order for an open system to achieve open systems dependability.
This document elaborates on IEC 60300-1 by providing details of the changes needed to
accommodate the characteristics of open systems. It defines process views based on
ISO/IEC/IEEE 15288:2015, which identifies the set of system life cycle processes.
This document is applicable to life cycles of products, systems, processes or services involving
hardware, software and human aspects or any integrated combinations of these elements.
For open systems, security is especially important since the systems are particularly exposed to
attack.
This document can be used to improve the dependability of open systems and to provide
assurance that the process views specific to open systems achieve their expected outcomes. It
helps an organization define the activities and tasks that need to be undertaken to achieve
dependability objectives in an open system, including dependability related communication,
dependability assessment and evaluation of dependability throughout system life cycles.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60300-3-3:2017(Main)
Dependability management - Part 3-3: Application guide - Life cycle costing (IEC 60300-3-3:2017)
EN 60300-3-3:2017

Provides a general introduction to the concept of life cycle costing, covers all applications and particularly highlights the costs associated with dependability of the product. Explains the purpose and value of life cycle costing and outlines the general approaches involved. Identifies typical life cycle cost elements to facilitate project and programme planning. General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62550:2017(Main)
Spare parts provisioning (IEC 62550:2017)
EN 62550:2017

This document describes requirements for spare parts provisioning as a part of supportability
activities that affect dependability performance so that continuity of operation of products,
equipment and systems for their intended application can be sustained.
This document is intended for use by a wide range of suppliers, maintenance support
organizations and users and can be applied to all items.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61078:2017(Main)
Reliability block diagrams (IEC 61078:2016)
EN 61078:2016

This International Standard describes:
• the requirements to apply when reliability block diagrams (RBDs) are used in
dependability analysis;
• the procedures for modelling the dependability of a system with reliability block diagrams;
• how to use RBDs for qualitative and quantitative analysis;
• the procedures for using the RBD model to calculate availability, failure frequency and
reliability measures for different types of systems with constant (or time dependent)
probabilities of blocks success/failure, and for non-repaired blocks or repaired blocks;
• some theoretical aspects and limitations in performing calculations for availability, failure
frequency and reliability measures;
• the relationships with fault tree analysis (see IEC 61025 [1]) and Markov techniques (see
IEC 61165 [2]).

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62741:2015(Main)
Guide to the demonstration of dependability requirements - The dependability case
EN 62741:2015

This International Standard gives guidance on the content and application of a dependability
case and establishes general principles for the preparation of a dependability case.
This standard is written in a basic project context where a customer orders a system that
meets dependability requirements from a supplier and then manages the system until its
retirement. The methods provided in this standard may be modified and adapted to other
situations as needed.
The dependability case is normally produced by the customer and supplier but can also be
used and updated by other organizations. For example, certification bodies and regulators
may examine the submitted case to support their decisions and users of the system may
update/expand the case, particularly where they use the system for a different purpose.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day