SIST EN 26590-2:1998

Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (ISO 6590-2:1986)

This part of ISO 6590 defines terms commonly used in plastic sack manufacture. It refers to single- and multi-ply sacks made from thermoplastic flexible film; it does not refer to bags for the retail trade.

Packmittel - Säcke - Begriffe und Formen - Teil 2: Säcke aus Kunststoff-Folie (ISO 6590-2:1986)

Dieser Teil der ISO 6590 definiert die in der Kunststoffsackindustrie gebräuchlichen Begriffe. Er bezieht sich auf ein- und mehrlagige Säcke aus Kunststoff-Folie und nicht auf Beutel und Tüten für den Einzelhandel.

Emballages - Sacs - Vocabulaire et types - Partie 2: Sacs faits d'un film thermoplastique flexible (ISO 6590-2:1986)

La présente partie de l'ISO 6590 définit les termes communément utilisés dans l'industrie du sac en plastique. Elle est applicable a des sacs faits d'un film thermoplastique flexible, simples ou multicouches; elle n'est pas applicable a des sacs pour le commerce de détail.

Embalaža - Vreče - Slovar in vrste - 2. del: Vreče iz termoplastične folije (ISO 6590-2:1986)

General Information

• Status: Published
• Publication Date: 30-Sep-1998
• ICS: 01.040.55 - Packaging and distribution of goods (Vocabularies)
• ICS: 55.080 - Sacks. Bags
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-1998
• Due Date: 01-Oct-1998
• Completion Date: 01-Oct-1998
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN 26590-2:1992 - Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (ISO 6590-2:1986)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Packmittel - Säcke - Begriffe und Formen - Teil 2: Säcke aus Kunststoff-Folie (ISO 6590-2:1986)Emballages - Sacs - Vocabulaire et types - Partie 2: Sacs faits d'un film thermoplastique flexible (ISO 6590-2:1986)Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (ISO 6590-2:1986)55.080Sacks. Bags01.040.55Pakiranje in distribucija blaga (Slovarji)Packaging and distribution of goods (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 26590-2:1992SIST EN 26590-2:1998en,fr,ru01-oktober-1998SIST EN 26590-2:1998SLOVENSKI
STANDARD















INTERNATIONAL STANDARD NORME INTERNATIONALE 659012 ME>KAYHAPOflHblM CTAHflAPT INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIKflYHAPOfiHAR OPI-AHM3AlJMR fl0 CTAH~APTM3ALWlM.ORGANISATlON INTERNATIONALE DE NORMALISATION Packaging - Sacks - Vocabulary and types - Part 2 : Sacks made from thermoplastic flexible film First edition - 1986-03-15 Emballages - Sacs - Vocabulaire et types - Partie 2 : Sacs faits d’un film thermoplastique flexible Premiere Edition - 1986-03-15 ynaKO6Ka - MeiuKu - CflOBapb M TMllbl - +CTb 2 : MeuwI, M3~OTOBfleHHble M3 TepMOllI’laCTWlHOih Wl6KOii IlJleHKb’l nepeoe MsAaHme - 1986-03-15 UDC/CDlJ/YAK 621.798.15 : 678.073 : 001.4 Ref. No./Ref. no : ISO 6590/2-1986 (E/F/R) CCblJlKa No: MC0 6590/2-1986 (AMP) Descriptors : packing, bags, thermoplastic resins, vocabulary. / Descripteurs : emballage, sac, r6sine thermoplastique, vocabulaire. / AecKpmTopbi : ynai


Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is nor- mally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take patt in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting . lnterna ing. tional Standard ISO 6590/2 was prepared by Technical Committee ISO/TC 122, Packag- Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. Avant-propos L’ISO (Organisation internationale de normalisation) est une federation mondiale d’organismes nationaux de normalisation (comites membres de I’ISO). L’elaboration des Normes inter- nationales est confiee aux comites techniques de I’ISO. Chaque comite membre interesse par une etude a Ie droit de faire Partie du comite technique cree a cet effet. Les organisations inter- nationales, gouvernementales et non gouvernementales, en liaison avec I’ISO participent egale- ment aux travaux. Les projets de Normes internationales adoptes par les comites techniques sont soumis aux comi- tes membres pour approbation, avant leur acceptation comme Normes internationales par Ie Conseil de I’ISO. Les Normes internationales sont approuvees conformement aux procedures de I’ISO qui requierent I’approbation de 75 % au moins des comites membres votants. La Norme internationale lages. ISO a 6th elaboree par Ie comite technique ISO/TC 122, L’attention des utilisateurs est attiree sur Ie fait que toutes les Normes internationales sont de temps en temps soumises a revision et que toute reference faite a une autre Norme internationale dans Ie present document implique qu’il s’agit, sauf indication contraire, de Ia derniere Edition. BBeAeHMe MC0 (Me>K~yriapo~riafr OpraHr43aur4fl no CratiAapTM3aur4r4) frsnflercfl eceMr4pHoM @eRepauMeW Ha4MOHaAbHblX OpraHVl3aqPlti n0 CTaH~apTPl3a~l’lVl (KOMMTeTOB-WeHOB MCO). PaJpa6OTKa Mem- flyHapOAHblX CTaHflapTOB OCy~eCTBJlfIeTCR TeXHM~eCKMMM KOMMTeTaMM MCO. KaxgblM KOMM- TeT-qJleH, 3aPlHTepeCOBaHHblti B AeflTeflbHOCTM, 4flfI KOTOpOti 6btn CO3AaH TeXHMqeCKMfi KOMMTeT, MMeeT npaB0 6blTb flpeflCTaBfleHHblM B 3TOM KOMMTeTe. Me~~yHapOfiHble npaBl4TeJlbCTBeHHble M HeflpaBVlTeJlbCTBeHHble OpraHM3a~MM, PlMelOiql’le CBF13M C MCO, TaKme npMHl4MalO-r yraCTl4e B pa6o-rax. npOeKTbl Me>KJJyHapOAHblX CTaHflapTOB, npMHflTble TeXHM~eCKMMM KOMMTeTaMM, paCCblJlalOTCFl KOMMTeTaM-WeHaM Ha o)qO6peHMe fl0 MX yTBep~~eHWl COBeTOM L/1co B Ka’-ieCTBe Me>KAyHapo& HblX CTaHflapTOB. OHM OJ406pRlOTCf! B COOTBeTCTBMM C npOqeflypOfi MCO, Tpe6ylOll@ti o~o6pekiMFI n0 MeHbUJefi Mepe 75 % KOMMTeTOB-WeHOB, npMHMMaiO~MX yraCTne B rOnOCOBaHl4k-l. MemjQfHapO~H YnaKoma. blti CTaH&apT MC0 6bin TexHM cleCKMM KOMkITeTOM MCO/TK 122, iIIpl4 MCnOIlb30BaHMM MemjJyHapOflHblX CTaHflapTOB HeO6XOJJqMMO npVlHMMaTb BO BHMMaHMe, qT0 BCe MexflyHapOAHble CTaHQapTbl nOflBepratOTCR BpeMfl OT BpeMeHM nepeCMOTpy M, n03TOMy, !llO- 6aH CCbJlKa Ha KaKOl%Jlkl60 MemC(ytiapOflHblti CTaHflapT B HaCTOR~eM AOKyMeHTe, KpOMe CnyqaeB, yKa3aHHblx 0~060, npeqnonaraeT er0 nocneflHee u3flaHue. 0 International Organkation for Standardkation, 1986 0 0 Organisation internationale de normalisation, 1986 l 0 MexAytiapoAHafi Opranbfsaqbtfi no Craki~apm3aqw, 1986 0 Printed in Switzerland/ Imprimb en Suisse/MsAaHo B UJeeWuapMM ii



Contents Page 1 Scope and field of application . 1 2 Generalterms . 1 3 Typesofsacks . 3 4 Constructional details. . 9 5 Materials . 12 6 Description of the Parts of a sack .
...