SIST EN 13918:2003
(Main)Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests
Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests
This European Standard specifies the requirements and type test methods of integrated flowmeter regulators for welding, cutting and allied processes.
It is applicable to integrated flowmeter regulators which may be equipped with flow control and measuring devices of gas flows on gas cylinders normally used for compressed gases up to 300 bar1) (30 MPa) and carbon dioxide (CO2).
Gasschweißgeräte - Druckregler mit integriertem Durchflussmesser für Gasflaschen für Schweißen, Schneiden und verwandte Prozesse - Einteilung, Festlegung und Prüfungen
Diese Norm enthält Anforderungen und Prüfverfahren für Druckregler mit integriertem Durchflussmesser für Schweißen, Schneiden und verwandte Prozesse.
Sie ist anwendbar für Druckregler mit integriertem Durchflussmesser an Gasflaschen, üblicherweise für Druckgase bis zu 300 bar ) (30 MPa) und Kohlenstoffdioxid (CO2), welche mit Durchflusseinstell- und Messeinrichtungen für Gasdurchflüsse ausgerüstet sind.
Matériel de soudage aux gaz - Détendeurs débitmetres intégrés utilisés sur les bouteilles pour le soudage, le coupage et les techniques connexes - Classification, spécification et essais
La présente Norme européenne spécifie les exigences et les méthodes d'essai de type relatives aux détendeurs débitmètres intégrés utilisés pour le soudage, le coupage et les techniques connexes.
Elle est applicable aux détendeurs débitmètres intégrés qui peuvent être équipés de dispositifs de réglage et de mesure du débit de gaz pour des bouteilles de gaz normalement utilisées pour les gaz comprimés jusqu'à 300 bar ) (30 MPa) et le dioxyde de carbone (CO2).
Oprema za plamensko varjenje - Regulatorji tlaka z vgrajenim merilnikom pretoka na plinskih jeklenkah za varjenje, rezanje in sorodne postopke - Razvrstitev, specifikacija in preskusi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za plamensko varjenje - Regulatorji tlaka z vgrajenim
merilnikom pretoka na plinskih jeklenkah za varjenje, rezanje in sorodne postopke - Razvrstitev, specifikacija in preskusiGasschweißgeräte - Druckregler mit integriertem Durchflussmesser für Gasflaschen für Schweißen, Schneiden und verwandte Prozesse - Einteilung, Festlegung und PrüfungenMatériel de soudage aux gaz - Détendeurs débitmetres intégrés utilisés sur les bouteilles pour le soudage, le coupage et les techniques connexes - Classification, spécification et essaisGas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests25.160.30Varilna opremaWelding equipment23.060.40Pressure regulators23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 13918:2003SIST EN 13918:2003en01-december-2003SIST EN 13918:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13918April 2003ICS 23.060.40English versionGas welding equipment - Integrated flowmeter regulators usedon cylinders for welding, cutting and allied processes -Classification, specification and testsMatériel de soudage aux gaz - Détendeurs débitmètresintégrés utilisés sur les bouteilles pour le soudage, lecoupage et les techniques connexes - Classification,spécification et essaisGasschweißgeräte - Druckregler mit integriertemDurchflussmesser für Gasflaschen für Schweißen,Schneiden und verwandte Prozesse - Einteilung,Festlegung und PrüfungenThis European Standard was approved by CEN on 13 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13918:2003 ESIST EN 13918:2003
Operating principles of integrated flowmeter regulators.11Annex B (informative)
Flow measurement — Test apparatus.12Bibliography.13SIST EN 13918:2003
1) 300 bar relates to max. gas cylinder charging pressure at 15 °C.SIST EN 13918:2003
2)Pressures exceeding atmospheric pressure.3)Standard conditions are 23 °C and 1,013 bar (0,1013 MPa) (according to ISO 554).SIST EN 13918:2003
30 % at any inlet pressure between p1 and p3.For integrated flowmeter regulators with multiple calibrated orifices, the stability requirement shall be fulfilled by theorifice allowing the highest flow (see 6.4 for the tests).5.2.10 Accuracy of the flow a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.