iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50052:1998/A2:1998

(Amendment)

Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

Supersedes A1:1990

Kapselungen aus Leichtmetallguss fur gasgefüllte Hochspannungs-Schaltgeräte und -Schaltanlagen

Enveloppes en alliage d'aluminium coulé pour l'appareillage à haute tension sous pression de gaz

Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear - Amendment A2

General Information

Status
Withdrawn
Publication Date
31-Jan-1998
Withdrawal Date
11-Sep-2019
ICS
29.130.10 - High voltage switchgear and controlgear
77.150.10 - Aluminium products
Technical Committee
SKA - Switchgear and control gear
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Sep-2019
Due Date
05-Oct-2019
Completion Date
12-Sep-2019
Ref Project
EN 50052:1986/A2:1993 - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear

Relations

Replaced By
SIST EN 50052:2017 - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
28-Jan-2023
Amends
SIST EN 50052:1998 - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
21-Sep-2010
Replaced By
SIST EN 50052:2017 - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
21-May-2013
Amends
SIST EN 50052:1998 - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
29-Jan-2023
Amends
SIST EN 50052:1998 - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Effective Date
07-Jun-2022

Buy Standard

EN 50052:1998/A2:1998EN 50052:1998/A2:1998
PreviousNext
Amendment
EN 50052:1998/A2:1998
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50052:1998/A2:1998
01-februar-1998
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and
controlgear - Amendment A2
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
Kapselungen aus Leichtmetallguss fur gasgefüllte Hochspannungs-Schaltgeräte und -
Schaltanlagen
Enveloppes en alliage d'aluminium coulé pour l'appareillage à haute tension sous
pression de gaz
Ta slovenski standard je istoveten z: EN 50052:1986/A2:1993
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 50052:1998/A2:1998 en
2003-01.Slovenski inštitut za standardizaci
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50064:2019(Main)
High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
EN 50064:2018

This European Standard applies to welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages.
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:   
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50069:2019(Main)
High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
EN 50069:2018

This European Standard applies to welded composite enclosures of cast and wrought aluminium alloy pressurized with dry air, inert gases (e.g. sulphur hexafluoride or nitrogen or a mixture of such gases), used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50052:2017(Main)
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50052:2016

This standard applies to cast aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   Circuit-breakers;
-   Switch-disconnectors;
-   Disconnectors;
-   Earthing switches;
-   Current transformers;
-   Voltage transformers;
-   Surge arrestors;
-   Busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50064:2019(Main)
High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminium alloy enclosures
EN 50064:2018

This European Standard applies to welded wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages.
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:   
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50069:2019(Main)
High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys
EN 50069:2018

This European Standard applies to welded composite enclosures of cast and wrought aluminium alloy pressurized with dry air, inert gases (e.g. sulphur hexafluoride or nitrogen or a mixture of such gases), used in indoor and outdoor installations of high-voltage switchgear and controlgear with rated voltages above 1kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   circuit-breakers;
-   switch-disconnectors;
-   disconnectors;
-   earthing switches;
-   current transformers;
-   voltage transformers;
-   surge arrestors;
-   busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50052:2017(Main)
Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50052:2016

This standard applies to cast aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
-   above 1 kV and up to and including 52 kV and with gas-filled compartments with design pressure higher than 300 kPa relative pressure (gauge);
-   and with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
-   Circuit-breakers;
-   Switch-disconnectors;
-   Disconnectors;
-   Earthing switches;
-   Current transformers;
-   Voltage transformers;
-   Surge arrestors;
-   Busbars and connections;
-   etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1247-1:2023(Main)
Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)
EN ISO 1247-1:2023

This document specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including:
a) general, decorative and protective paints, and
b) special finishing paints.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day