SIST EN 12477:2002
(Main)Protective gloves for welders
Protective gloves for welders
This European Standard specifies requirements and test methods for protective gloves for use in manual metal welding, cutting and allied processes.
Protective gloves for welders protect the hands and the wrists during the process of welding and related tasks.
Protective gloves for welders protect against small splashes of molten metal, short contact exposure to limited flame, convective heat and contact heat and U.V. radiation from the arc. Besides, they protect against mechanical aggressions.
According to their performance, protective gloves for welders are classified into two types :
- type A : lower dexterity (with higher other performance),
- type B : higher dexterity (with lower other performance).
Protective gloves for special welding processes are outside the scope of this standard.
Schutzhandschuhe für Schweißer
Diese Europäische Norm legt wesentliche Anforderungen an und Prüfverfahren für Schutzhandschuhe zum manuellen Schweißen, Schneiden und für verwandte Verfahren fest. Schutzhandschuhe für Schweißer schützen die Hände und Handgelenke beim Schweißen und bei damit verbundenen Arbeiten.
Schutzhandschuhe für Schweißer schützen die Hände und die Handgelenke während des Schweißvorgangs und ähnlichen Arbeiten. Schutzhandschuhe für Schweißer schützen vor kleinen Spritzern geschmolzenen Metalls, kurzem Kontakt mit beschränkter Flammeneinwirkung, konvektiver Wärme und Kontaktwärme und UV-Strahlen vom Lichtbogen. Darüber hinaus schützen sie gegen mechanische Angriffe.
Entsprechend ihrer Anforderungen werden Schutzhandschuhe für Schweißer in zwei Ausführungen unterteilt:
- Ausführung A: geringe Fingerfertigkeit (mit hohen anderen Anforderungen)
- Ausführung B: hohe Fingerfertigkeit (mit geringen anderen Anforderungen)
Schutzhandschuhe für besondere Schweißprozesse gehören nicht zum Anwendungsbereich dieser Norm.
Gants de protection pour soudeurs
La présente Norme spécifie les exigences et les méthodes d'essai applicables aux gants de protection utilisés pour le soudage et le coupage manuels des métaux, et les techniques connexes.
Les gants de protection pour soudeurs protégent les mains et les poignets lors du procédé de soudage et des tâches associées.
Les gants de protection pour soudeurs protegent contre les petites projections de métal fondu, l'exposition de courte durée a une flamme limitée, la chaleur convective, la chaleur de contact et le rayonnement UV émis par l'arc. En outre, ils protegent contre les agressions mécaniques.
Les gants de protection pour soudeurs sont classés en deux types :
Type A : moins grande dextérité (avec les autres performances plus élevées),
type B : plus grande dextérité (avec les autres performances plus faibles).
Les gants de protection pour les procédés de soudage spéciaux sont exclus du domaine d'application de cette norme.
Varovalne rokavice za varilce
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varovalne rokavice za varilceSchutzhandschuhe für SchweißerGants de protection pour soudeursProtective gloves for welders25.160.01Varjenje, trdo in mehko spajkanje na splošnoWelding, brazing and soldering in general13.340.40Varovanje dlani in rokHand and arm protectionICS:Ta slovenski standard je istoveten z:EN 12477:2001SIST EN 12477:2002en01-junij-2002SIST EN 12477:2002SLOVENSKI
STANDARD
SIST EN 12477:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12477October 2001ICS 13.340.40English versionProtective gloves for weldersGants de protection pour soudeursSchutzhandschuhe für SchweißerThis European Standard was approved by CEN on 13 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12477:2001 ESIST EN 12477:2002
EN 12477:2001 (E)2ContentsForeword.3Introduction.41Scope.42Normative references.43Requirements.53.1General requirements.53.2Sizes.53.3Specific requirements.54Conditioning.65Test methods.65.1Abrasion resistance.75.2Blade cut resistance.75.3Tear resistance.75.4Puncture resistance.75.5Burning behaviour.75.6Contact heat resistance.75.7Convective heat resistance.75.8Resistance to small splashes of molten metal.75.9Dexterity.76Marking.87Information supplied by the manufacturer.8Annex ZA (informative) Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.9SIST EN 12477:2002
EN 12477:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 162 "Protective clothing includinghand and arm protection and lifejackets", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest byApril 2002.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 12477:2002
EN 12477:2001 (E)4IntroductionThere are various manual welding processes, which are defined in ISO 857-1 : 1998 “Welding and allied processes- Vocabulary -
Part 1: Metal welding processes".The nature and the severity of the risks for welders' hands vary according to the various welding processes. Theperformance (protection and dexterity) required for protective gloves can therefore differ depending on theirintended use.1 ScopeThis European Standard specifies requirements and test methods for protective gloves for use in manual metalwelding, cutting and allied processes.Protective gloves for welders protect the hands and the wrists during the process of welding and related tasks.Protective gloves for welders protect against small splashes of molten metal, short contact exposure to limitedflame, convective heat and contact heat and U.V. radiation from the arc. Besides, they protect against mechanicalaggressions.According to their performance, protective gloves for welders are classified into two types :- type A : lower dexterity (with higher other performance),- type B : higher dexterity (with lower other performance).Protective gloves for special welding processes are outside the scope of this standard.2 Normative referencesThis European standard incorporates, by dated or undated references, provisions from other publications. Thesenormative references are quoted at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments or revisions of any of these publicatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.