oSIST prEN IEC 60938-2-1:2023

Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D

Drosseln zur Unterdrückung elektromagnetischer Störungen - Teil 2-1: Vordruck für Bauartspezifikation - Drosseln, für die Sicherheitsprüfungen erforderlich sind - Bewertungsstufe D

Inductances fixes d'antiparasitage - Partie 2-1: Spécification particulière cadre - Inductances nécessitant des essais de sécurité - Niveau d'évaluation D

Fiksne dušilke za dušenje elektromagnetnega motenja - 2-1. del: Okvirna podrobna specifikacija - Dušilke, za katere so potrebni varnostni preskusi - Raven ocenjevanja D

General Information

• Status: Not Published
• Public Enquiry End Date: 28-Feb-2023
• ICS: 29.100.10 - Magnetic components
• ICS: 29.180 - Transformers. Reactors
• ICS: 31.020 - Electronic components in general
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 14-Dec-2022
• Due Date: 03-May-2023
• Completion Date: 11-May-2023
• Ref Project: prEN IEC 60938-2-1:2022 - Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D

Relations

• Revised: SIST EN 60938-2-1:2002 - Fixed inductors for electromagnetic interference suppression -- Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D
• Effective Date: 29-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60938-2-1:2023
01-februar-2023
Fiksne dušilke za dušenje elektromagnetnega motenja - 2-1. del: Okvirna
podrobna specifikacija - Dušilke, za katere so potrebni varnostni preskusi - Raven
ocenjevanja D
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail
specification - Inductors for which safety tests are required - Assessment level D
Drosseln zur Unterdrückung elektromagnetischer Störungen - Teil 2-1: Vordruck für
Bauartspezifikation - Drosseln, für die Sicherheitsprüfungen erforderlich sind -
Bewertungsstufe D
Inductances fixes d'antiparasitage - Partie 2-1: Spécification particulière cadre -
Inductances nécessitant des essais de sécurité - Niveau d'évaluation D
Ta slovenski standard je istoveten z: prEN IEC 60938-2-1:2022
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
oSIST prEN IEC 60938-2-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60938-2-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60938-2-1:2023
40/2989/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60938-2-1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-09 2023-03-03
SUPERSEDES DOCUMENTS:
40/2934/CD, 40/2960/CC

IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:

EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

TITLE:
Fixed inductors for electromagnetic interference suppression – Part 2-1: Blank detail specification – Inductors
for which safety tests are required – Assessment level D

PROPOSED STABILITY DATE: 2030

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60938-2-1:2023
40/2989/CDV – 2 – IEC CDV 60938-2-1 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIXED INDUCTORS FOR ELECTROMAGNETIC
INTERFERENCE SUPPRESSION –

Part 2-1: Blank detail specification –
Inductors for which safety tests are required



FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60938-2-1 has been prepared by IEC technical committee 40: CAPACITORS AND
RESISTORS FOR ELECTRONIC EQUIPMENT. It is an International Standard.
This second edition cancels and replaces the first edition published in 1999. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) It combines IEC 60938-2-1:1999 and IEC 60938-2-2:1999 into one BDS.
b) Test schedule for quality conformance inspection is moved to an informative Annex

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60938-2-1:2023
IEC CDV 60938-2-1 © IEC 2022 – 3 – 40/2989/CDV
The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at www.iec.ch/members_experts/refdocs. The main document types developed by
IEC are described in greater detail at www.iec.ch/standardsdev/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
The committee has decided that this publication remains valid until 2005.
At this date, in accordance with the committee’s decision, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 5 ----------------------
oSIST prEN IEC 60938-2-1:2023
40/2989/CDV – 4 – IEC CDV 60938-2-1 © IEC 2022
1 FIXED INDUCTORS FOR ELECTROMAGNETIC
2 INTERFERENCE SUPPRESSION –
3
4 Part 2-1: Blank detail specification –
5 Inductors for which safety tests are required
6
7
8
9 INTRODUCTION
10 Blank detail specification
11 A blank detail specification is a supplementary document to the sectional specification and
12 contains requirements for style, layout and minimum content of detail specifications. Detail
13 specifications not complying with these requirements shall not be considered as being in
14 accordance with IEC specifications nor shall they so be described.
15 In the preparation of detail specifications, the content of 4.3 of the sectional specification shall
16 be taken into account.
17 The numbers between square brackets on the first page of the detail specification correspond
18 to the following information which shall be inserted in the position indicated.
19 Identification of the detail specification
20 [1] The "International Electrotechnical Commission" or the National Standards Organization
21 under whose authority the detail specification is drafted.
22 [2] The IEC or National Standards number of the detail specification, date of issue and any
23 further information required by the national system.
24 [3] The number and issue number of the IEC or national generic specification.
25 [4] The IEC number of the blank detail specification.
26 Identification of the inductor
27 [5] A short description of the type of inductor.
28 [6] Information on typical construction (when applicable).
29 [7] Outline drawing with main dimensions which are of importance for interchangeability
30 and/or reference to the national or international documents for outlines. Alternatively,
31 this drawing may be given in an annex to the detail specification.
32 [8] Application or group of applications covered and/or assessment level.
33 [9] Reference data on the most important properties, to allow comparison between the
34 various inductor types.
35
36

---------------------- Page: 6 ----------------------
oSIST prEN IEC 60938-2-1:2023
IEC CDV 60938-2-1 © IEC 2022 – 5 – 40/2989/CDV
37

[1] IEC 60938-2-1XX [2]
QC XXXXXXXXXXXX

ELECTRONIC COMPONENTS OF ASSESSED IEC 60938-2-1 [4]
QUALITY IN ACCORDANCE WITH: QC XXXXXX

[3] FIXED INDUCTORS FOR
ELECTROMAGNETIC INTERFERENCE
SUPPRESSION FOR WHICH SAFETY [5]
Outline drawing: (see Table 1) TESTS ARE REQUIRED
(. angle projection)


[7] [6]
(Other shapes are permitted within the dimensions
given)
 [8]

NOTES [1] to [9] see page 4.
38  [9]
Information on the availability of components qualified
to this detail specification is given in the Register of
Approvals.
39
40 1 Scope
41 This part of IEC 60938-2 is applicable to the drafting of detail specifications for fixed inductors
42 for which safety tests are required for use in electronic equipment.
43 2 Normative references
44 The following documents are referred to in the text in such a way that some or all of their
45 content constitutes requirements of this document. For dated references, only the edition
46 cited applies. For undated references, the latest edition of the referenced document (including
47 any amendments) applies.
48 IEC 60938-2:2021, Fixed inductors for electromagnetic interference suppression –
49 Part 2: Sectional specification
50 3 Terms and definitions
51 No terms and definitions are listed in this document.
52 ISO and IEC maintain terminological databases for use in standardization at the following
53 addresses:

---------------------- Page: 7 ----------------------
oSIST prEN IEC 60938-2-1:2023
40/2989/CDV – 6 – IEC CDV 60938-2-1 © IEC 2022
54 • IEC Electropedia: available at https://www.electropedia.org/
55 • ISO Online browsing platform: available at https://www.iso.org/obp
56 4 General information
57 4.1 Recommended method(s) of mounting
58 The recommended method of mounting for normal use shall be specified. It is mandatory to
59 use this method for the application of shock and vibration tests. If the design of the inductor
60 requires special mounting fixtures in its use, the detail specification shall describe the
61 mounting fixtures and they shall be used in the application of shock and vibration tests. The
62 specified heat sink shall be used in the application of the endurance test.
63 4.2 Dimensions
64 Table 1 – Dimensions related to case size
Case size Dimensions
reference or type
mm

L W H



NOTE 1 When there is no case size reference, the dimensions should be given per type designation.
NOTE 2 The dimensions should be given as maximum dimensions or as nominal dimensions with a tolerance.
65 4.3 Ratings and characteristics
66 Nominal inductance (L ) (see Table 2)
N
67 Tolerance on inductance
68 Rated current (I ) (see Table 2)
R
69 DC resistance (R) (see Table 2)
70 Rated voltage
71 Rated temperature
72 Climatic category
73 Category of passive flammability (optional)
74
...