oSIST prEN IEC 60335-2-68:2026/oprAA:2026
(Amendment)Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
- Abstract
This standard deals with the safety of electrical portable, non-self-propelled motor-operated spray extraction machines with or without attachments and with or without electrical heating elements, intended for commercial indoor use. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - rental services for those machines; - all uses other than normal housekeeping purposes. The following power systems are covered: - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. This standard applies to machines in which the pressure of the employed cleaning agent does not exceed 2,5 MPa, and in which the product of the pressure (in MPa) and the flow of cleaning agent (in litres per minute) does not exceed 100, and in which the temperature of the cleaning agent at the spray nozzle outlet does not exceed 85 °C. This standard does not apply to - vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); - floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series). - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed to handle hazardous solvents, such as flammable or explosive liquids;
- Status
- Not Published
- Public Enquiry End Date
- 26-Nov-2026
- Technical Committee
- VGA - Safety of household and similar electrical appliances
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 10-Sep-2026
- Due Date
- 28-Jan-2027
oSIST prEN IEC 60335-2-68:2026/oprAA:2026 is a CLC draft European amendment to the safety standard for spray extraction machines for commercial use. It modifies prEN IEC 60335-2-68:2026 for manufacturers, test laboratories, and compliance teams that design, assess, or document these appliances. The amendment adds instruction requirements and introduces requirements for noise, shock, and vibration measurement.
What does oSIST prEN IEC 60335-2-68:2026/oprAA:2026 specify?
oSIST prEN IEC 60335-2-68:2026/oprAA:2026 is a draft amendment that updates the European safety requirements for portable, non-self-propelled motor-operated spray extraction machines for commercial indoor use. The base scope covers machines with or without attachments and with or without electrical heating elements, including mains-powered and battery-operated machines within the stated pressure, flow, and temperature limits.
The amendment is read together with prEN IEC 60335-2-68:2026 and modifies the Introduction, Scope, normative references, Clause 7 on markings and instructions, the annexes, and the bibliography. It also links the document to Part 1 and to European and international methods used for noise and vibration work.
| Annex | What it covers |
|---|---|
| AA | Normative requirements for airborne noise information and measurement |
| BB | Normative requirements for vibration, including repeated shock vibration |
| ZA | Normative references and European publications |
| ZC | Special national conditions |
| ZZA | Relationship to Directive 2014/35/EU |
| ZZB | Relationship to Regulation (EU) 2023/1230 |
| ZZC | Relationship to Directive 2014/53/EU |
What are the key requirements of oSIST prEN IEC 60335-2-68:2026/oprAA:2026?
The amendment strengthens user information and adds technical methods for noise and vibration. In practice, that means manufacturers need to revise markings, instructions, and test declarations so the machine can be used and assessed safely in commercial settings.
Markings and instructions
Clause 7.1 adds a requirement to mark the machine with a website, e-mail address, or other digital contact for the manufacturer, or to give that information on the packaging or in an accompanying document if the product cannot carry it. This matters because service, complaints, and technical support must be traceable.
Clause 7.1.Z101 adds access marking for digital instructions. Clause 7.12 allows instructions in hard copy or digital format, but they must support safe use of the appliance, including foreseeable misuse, supervision of children and domestic animals, and the use of competent persons for repairs. If electronic instructions are used, Clause 7.12.9 requires a suitable display and the ability to print, download, and save the instructions for later access.
Noise information
The amendment makes noise a stated hazard and requires noise emission information in the instructions, with the detail linked to Annex AA. The normative references add the acoustics standards used for sound power, sound pressure, and declaration of noise emission values. For a manufacturer, this means noise testing and the way the result is reported are part of the compliance file, not an optional extra.
Vibration and shock
Annex BB is made normative and adds vibration-related requirements. Clause BB.2 includes the vibration emission value for repeated shock vibrations, identified as pF, determined in accordance with EN ISO 5349-3. The text also notes that peaks at the beginning or end of the work cycle are not used for that calculation. In practice, the vibration declaration must match the defined measurement method, not just a general machine reading.
Scope clarifications
Clause 1 adds a statement on reasonably foreseeable hazards of intended use, compares leakage current with touch current defined in IEC 60990, and states that “appliance” includes “machine” where applicable. It also brings radio function, remote communication, and remote operation into scope and excludes toys, including toys shaped like an appliance.
What terms does oSIST prEN IEC 60335-2-68:2026/oprAA:2026 define?
- Spray extraction machines - Portable, non-self-propelled motor-operated commercial machines used for spray cleaning and extraction.
- Touch current - The current that may flow through the human body when an accessible part is touched, as used with IEC 60990.
- Radio appliance - A term used here with the same meaning as radio equipment.
- Appliance - Used here with the same meaning as equipment, and where applicable it includes machine.
- pF - The vibration emission value for repeated shock vibrations measured under EN ISO 5349-3.
- Competent persons - People who are qualified to carry out repairs mentioned in the instructions.
Who uses oSIST prEN IEC 60335-2-68:2026/oprAA:2026?
Manufacturers of commercial spray extraction machines use it for design, marking, instructions, and technical documentation. Test laboratories use it for noise, shock, and vibration measurement. Certification bodies and compliance teams use it to check safety information, scope limits, and the correct use of the referenced methods.
It is also relevant to buyers and operators in hotels, schools, hospitals, factories, retail premises, offices, banks, and rental services because those are the commercial locations named in the scope. Service organizations use it when preparing repair procedures and user documentation.
What changed in oSIST prEN IEC 60335-2-68:2026/oprAA:2026 from the previous edition?
The European foreword states that the amendment introduces additional requirements for instructions and new requirements for noise, shock, and vibration measurement. It also states that EN 60335-2-68:2012 is superseded by European Amendment A11.
The main documented changes are:
- updated introduction and scope text
- added manufacturer contact marking
- added digital-instructions access marking
- revised instruction content, including misuse and repair guidance
- noise and vibration instruction requirements
- normative changes in Annex AA and Annex BB
Which standards are used with oSIST prEN IEC 60335-2-68:2026/oprAA:2026?
| Standard | What it contributes |
|---|---|
| EN IEC 60335-1:2023 | General safety requirements for household and similar electrical appliances |
| IEC 60990 | Method for evaluating touch current |
| ISO 3743-1 | Sound power measurement in a hard-walled test room |
| ISO 3744:2025 | Sound power measurement in an essentially free field over a reflecting plane |
| ISO 4871:1996 | Declaration and verification of noise emission values |
| ISO 9614-2:1996 | Sound power measurement by sound intensity scanning |
| ISO 11203:1995 | Emission sound pressure levels at a workstation and other positions |
| ISO 5349-1 | General requirements for hand-transmitted vibration measurement |
| ISO 5349-3:2025 | Repeated shock vibration measurement |
| IEC TS 62885-1 | Test material and test equipment for surface cleaning appliances |
What does the oSIST prEN IEC 60335-2-68:2026/oprAA:2026 document contain?
The document contains a European foreword, then clause-by-clause modifications to the base standard. Its technical content focuses on scope updates, references, markings, instructions, noise, vibration, and annex changes.
It also includes Annex ZA with European equivalents for the referenced publications, Annex ZC with a Finnish national condition, and Annexes ZZA, ZZB, and ZZC on the relationship to EU legislation. The bibliography is updated with related IEC and ISO references used in the document.
Relations
- Effective Date
- 20-Jan-2026
Frequently Asked Questions
oSIST prEN IEC 60335-2-68:2026/oprAA:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use". This standard covers: This standard deals with the safety of electrical portable, non-self-propelled motor-operated spray extraction machines with or without attachments and with or without electrical heating elements, intended for commercial indoor use. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - rental services for those machines; - all uses other than normal housekeeping purposes. The following power systems are covered: - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. This standard applies to machines in which the pressure of the employed cleaning agent does not exceed 2,5 MPa, and in which the product of the pressure (in MPa) and the flow of cleaning agent (in litres per minute) does not exceed 100, and in which the temperature of the cleaning agent at the spray nozzle outlet does not exceed 85 °C. This standard does not apply to - vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); - floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series). - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed to handle hazardous solvents, such as flammable or explosive liquids;
This standard deals with the safety of electrical portable, non-self-propelled motor-operated spray extraction machines with or without attachments and with or without electrical heating elements, intended for commercial indoor use. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - rental services for those machines; - all uses other than normal housekeeping purposes. The following power systems are covered: - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. This standard applies to machines in which the pressure of the employed cleaning agent does not exceed 2,5 MPa, and in which the product of the pressure (in MPa) and the flow of cleaning agent (in litres per minute) does not exceed 100, and in which the temperature of the cleaning agent at the spray nozzle outlet does not exceed 85 °C. This standard does not apply to - vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); - floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series). - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed to handle hazardous solvents, such as flammable or explosive liquids;
oSIST prEN IEC 60335-2-68:2026/oprAA:2026 is classified under the following ICS (International Classification for Standards) categories: 97.020 - Home economics in general; 97.080 - Cleaning appliances. The ICS classification helps identify the subject area and facilitates finding related standards.
oSIST prEN IEC 60335-2-68:2026/oprAA:2026 has the following relationships with other standards: It is inter standard links to oSIST prEN IEC 60335-2-68:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
oSIST prEN IEC 60335-2-68:2026/oprAA:2026 is associated with the following European legislation: EU Directives/Regulations: 2014/53/EU, 2023/1230; Standardization Mandates: M/536, M/605. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
oSIST prEN IEC 60335-2-68:2026/oprAA:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2026
Gospodinjski in podobni električni aparati - Varnost - 2-68. del: Posebne zahteve
za pršilnike za komercialno uporabo - Dopolnilo AA
Household and similar electrical appliances - Safety - Part 2-68: Particular requirements
for spray extraction machines, for commercial use
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-68:
Besondere Anforderungen für Sprühextraktionsmaschinen für den gewerblichen
Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-68: Exigences
particulières pour les machines de nettoyage par pulvérisation et aspiration, à usage
commercial
Ta slovenski standard je istoveten z: prEN IEC 60335-2-68:2026/prAA:2026
ICS:
97.080 Aparati za čiščenje Cleaning appliances
oSIST prEN IEC 60335-2- en
68:2026/oprAA:2026
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-68:2026
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
September 2026
ICS 97.020 -
English Version
Household and similar electrical appliances - Safety - Part 2-68:
Particular requirements for spray extraction machines, for
commercial use
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-68: Exigences particulières pour les machines de ähnliche Zwecke - Teil 2-68: Besondere Anforderungen für
nettoyage par pulvérisation et aspiration, à usage Sprühextraktionsmaschinen für den gewerblichen Gebrauch
commercial
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60335-2-68:2026; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-11-27.
It has been drawn up by CLC/TC 61.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 83284 Ref. No. prEN IEC 60335-2-68:2026/prAA:2026 E
5 Contents Page
6 European foreword . 3
7 1 Modification to the Introduction . 4
8 2 Modification to the clause 1, “Scope” . 4
9 3 Modification to Clause 2, “Normative references” . 4
10 4 Modification to clause "7 Markings and instructions". 5
11 5 Modification to the annexes . 6
12 6 Modification to Bibliography . 9
14 European foreword
15 This document (prEN IEC 60335-2-68:2026/prAA:2026) consists of the text prepared by CLC/TC 61 "Safety
16 of household and similar electrical appliances".
17 This document is currently submitted to the Enquiry.
18 The following dates are proposed:
• latest date by which the existence of this document has to (doa) dav + 6 months
be announced at national level
• latest date by which this document has to be implemented (dop) dav + 12 months
at national level by publication of an identical
national standard or by endorsement
• latest date by which the national standards conflicting with (dow) dav + 36 months
this document have to be withdrawn (to be confirmed or
modified when voting)
19 This document is read in conjunction with prEN IEC 60335-2-68:2026.
20 prEN IEC 60335-2-68:2026/prAA:2026 includes the following significant technical modifications:
21 — introduce additional requirements for instructions;
22 — introduce requirements for noise, shock and vibration measurement.
23 The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are
24 additional to those in the IEC standard are prefixed with the letter “Z”.
Secretary’s note: The text contained in the Secretary’s notes will be removed from the standard before
publication, as it is provided solely to inform stakeholders about the reasons for introducing the European
common modifications.
25 1 Modification to the Introduction
26 Delete the words “manufacturer's”.
27 2 Modification to the clause 1, “Scope”
28 Add the following paragraph before the last one.
29 Addition:
30 “With European Amendment A11 the EN 60335-2-68:2012 is superseded.
31 This European Amendment A11, supplements or modifies the corresponding clauses of the standards below:
32 – EN IEC 60335-1:2023 (Part 1)
33 – EN IEC 60335-2-68:2026 (Part 2)
34 This standard deals with the reasonably foreseeable hazards of intended use presented by appliances that
35 are encountered by all persons and domestic animals when this is not in contradiction with the intended or
36 reasonably foreseeable use of the appliance.
37 For the purpose of this document, the measurement of the leakage current is compared with the touch current
38 as defined in IEC 60990, which specifies the methods for evaluating the current that may flow through the
39 human body when an accessible part is touched.
40 For the purpose of this document, the term “appliance” includes the term “machine” where applicable.
41 This document deal with specific requirements on noise emitted from these appliances because the
42 generated noise is LpA > 70 dB(A) and it is considered to be a relevant hazard.
43 This document contains requirements for appliances with radio function, remote communication, and
44 remote operation.
45 For the scope of this document, the term “radio appliance” is used with the same meaning of “radio
46 equipment”.
47 For the scope of this document, the term “appliance” is used with the same meaning of “equipment”.
48 Add the following dashed item in the paragraph starting with “This standard does not apply to:“
49 “- Toys, including those shaped like an appliance.”
50 3 Modification to Clause 2, “Normative references”
51 Addition:
52 EN IEC 60335-1:2023, Household and similar electrical appliances — Safety — Part 1: General
53 requirements
54 ISO 3743-1, Acoustics — Determination of sound power levels and sound energy levels of noise sources
55 using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1:
56 Comparison method for a hard-walled test room
57 ISO 3744:2025, Acoustics — Determination of sound power levels and sound energy levels of noise sources
58 using sound pressure — Engineering methods for an essentially free field over a reflecting
59 ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and
60 equipment
As impacted by EN IEC 60335-1:2023/A11:2023 and EN IEC 60335-1:2023/prAB:2025.
As impacted by EN IEC 60335-1:2023/A11:2023 and EN IEC 60335-1:2023/prAB:2025.
---
...