iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61326:1998

(Main)

Electrical equipment for measurement, control and laboratory use - EMC requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements

This standard specifies miminum requirements for immunity and emissions regarding electromagnetic compatibility (EMC) for electrical equipment, operating from a supply of less than 1000 V a.c. or 1500 V d.c. intended for professional, industrial process and educational use, including equipment and  computing devices for: measurement and test: control: laboratory use; accessories intended for use with the above (such as sample handling equipment), intended to be used in industrial and non-industrial locations. Computing devices and assemblies and similar equipment within the scope of information technology equipment (ITE) and complying with applicable ITE EMC standards can be used without additional testing. Where a relevant dedicated EMC standard exists, it shall take precedence over all aspects of this product-family standard. The following equipment is covered in this standard: a) electrical measurement and test equipment -  - this is equipment which by electrical means This equipment which controls on e or more output quantities to specifi calues, with each value determined by manual settings, by local or remote programming, or by one or more input variables. This includes industrial process measurement and control (IPMC) equipment, which consists of devices such as: process controllers and regulators; programmable controllers (PC); power supply units of equipment and systems (centralized or dedicated); analogue/digital indicators and recorders; process instrumentation; transducers, positioners, intelligent actuators, etc. c) Electrical laboratory equipment - This equipment which measures, indicates, monitors or analyzes substances, or is used to prepare materials. This equipment may also be used in areas other than laboratories.

Elektrische Betriebsmittel für Leittechnik und Laboreinsatz - EMV-Anforderungen

Matériels électriques de mesure, de commande et de laboratoire - Prescriptions relatives à la CEM

Electrical equipment for measurement, control and laboratory use - EMC requirements (IEC 61326:1997)

General Information

Status
Withdrawn
Publication Date
31-Oct-1998
Withdrawal Date
11-Jul-2011
ICS
19.080 - Electrical and electronic testing
33.100.01 - Electromagnetic compatibility in general
Technical Committee
MKP - Industrial-process measurement and control
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Jul-2011
Due Date
03-Aug-2011
Completion Date
12-Jul-2011
Directive
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
89/336/EEC - Electromagnetic compatibility (EMC)
Mandate
BC/CLC/92-02 - BC/CLC/92-02
Ref Project
EN 61326:1997 - Electrical equipment for measurement, control and laboratory use - EMC requirements

Relations

Replaced By
SIST EN 61326-2-5:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
Effective Date
01-Jan-2007
Replaced By
SIST EN 61326-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
Effective Date
01-Jan-2007
Amended By
SIST EN 61326:1998/A2:2002 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
29-Jan-2023
Amended By
SIST EN 61326:1998/A1:1998 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
21-Sep-2010
Amended By
SIST EN 61326:1998/A2:2002 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
21-Sep-2010
Amended By
SIST EN 61326:1998/A3:2004 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
21-Sep-2010
Replaced By
SIST EN 61326-2-2:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-3-2:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
Effective Date
28-Jan-2023
Replaced By
SIST EN 61326-2-3:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
Effective Date
01-Nov-2009
Replaced By
SIST EN 61326-2-2:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
Effective Date
01-Jan-2007
Replaced By
SIST EN 61326-2-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
Effective Date
28-Jan-2023
Replaced By
SIST EN 61326-2-6:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
Effective Date
29-Jan-2023
Amended By
SIST EN 61326:1998/A3:2004 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
28-Jan-2023
Amended By
SIST EN 61326:1998/A1:1998 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-2-3:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-2-5:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-2-4:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
Effective Date
28-Jan-2023
Replaced By
SIST EN 61326-3-1:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
Effective Date
28-Jan-2023
Amended By
SIST EN 61326:1998/A2:2002 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
07-Jun-2022
Revises
SIST EN 61326-2-6:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
Effective Date
07-Jun-2022
Revises
SIST EN 61326-2-2:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
Effective Date
07-Jun-2022
Revises
SIST EN 61326-2-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
Effective Date
07-Jun-2022
Revises
SIST EN 61326-2-3:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
Effective Date
07-Jun-2022
Amended By
SIST EN 61326:1998/A3:2004 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
07-Jun-2022
Revises
SIST EN 61326-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
Effective Date
07-Jun-2022
Amended By
SIST EN 61326:1998/A1:1998 - Electrical equipment for measurement, control and laboratory use - EMC requirements
Effective Date
07-Jun-2022
Revises
SIST EN 61326-3-1:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
Effective Date
07-Jun-2022
Revises
SIST EN 61326-2-4:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
Effective Date
07-Jun-2022
Revises
SIST EN 61326-2-5:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
Effective Date
07-Jun-2022
Revises
SIST EN 61326-3-2:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
Effective Date
07-Jun-2022
Replaced By
SIST EN 61326-2-4:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
Effective Date
01-Nov-2009
Replaced By
SIST EN 61326-2-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
Effective Date
01-Jan-2007
Replaced By
SIST EN 61326-3-2:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
Effective Date
01-Jun-2011
Replaced By
SIST EN 61326-3-1:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
Effective Date
01-Jun-2011

Buy Standard

EN 61326:1998EN 61326:1998
PreviousNext
Standard
EN 61326:1998
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61326:1998
01-november-1998
Electrical equipment for measurement, control and laboratory use - EMC
requirements (IEC 61326:1997)
Electrical equipment for measurement, control and laboratory use - EMC requirements
Elektrische Betriebsmittel für Leittechnik und Laboreinsatz - EMV-Anforderungen
Matériels électriques de mesure, de commande et de laboratoire - Prescriptions relatives
à la CEM
Ta slovenski standard je istoveten z: EN 61326:1997
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 61326:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61326:1998

---------------------- Page: 2 ----------------------

SIST EN 61326:1998

---------------------- Page: 3 ----------------------

SIST EN 61326:1998

---------------------- Page: 4 ----------------------

SIST EN 61326:1998

---------------------- Page: 5 ----------------------

SIST EN 61326:1998

---------------------- Page: 6 ----------------------

SIST EN 61326:1998

---------------------- Page: 7 ----------------------

SIST EN 61326:1998

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61326:1998/A1:1998(Amendment)
Electrical equipment for measurement, control and laboratory use - EMC requirements
EN 61326:1997/A1:1998

Will be superseded by EN 61326 series

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61326-2-3:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning (IEC 61326-2-3:2020)
EN IEC 61326-2-3:2021

In addition to the requirements of IEC 61326-1, this part of IEC 61326 specifies more detailed
test configurations, operational conditions and performance criteria for transducers with
integrated or remote signal conditioning.
This document applies only to transducers characterized by their ability to transform, with the
aid of an auxiliary energy source, a non-electric quantity to a process-relevant electrical signal,
and to output the signal at one or more PORTS. This document includes transducers for electrochemical
and biological measured quantities.
The transducers covered by this document can be powered by AC or DC voltage and/or by
battery or with internal power supply.
Transducers referred to by this document comprise at least the following items (see Figure 101
and Figure 102):
– one or more elements for transforming a non-electrical input quantity to an electrical
quantity;
– a TRANSMISSION LINK for transferral of the electrical quantity to a component for signal
conditioning;
– a unit for signal conditioning that converts the electrical quantity to a process-relevant
electrical signal;
– an enclosure for enclosing the above-stated components fully or in parts.
Transducers referred to by this document can also have the following items (see Figure 101
and Figure 102):
– a communication and control unit;
– a display unit;
– control elements such as keys, buttons, switches, etc.;
– transducer output signals (for example, switch outputs, alarm outputs) which are clearly
assigned to the input signal(s);
– transducers with signal conditioning which may be integrated or remote.
The manufacturer specifies the environment for which the product is intended to be used and
utilizes the corresponding test levels of IEC 61326-1.
Additional requirements and exceptions for specific types of transducers are given in Annex AA,
Annex BB and Annex CC to this document.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61326-2-1:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC 61326-2-1:2020)
EN IEC 61326-2-1:2021

In addition to the scope of IEC 61326-1, this part of IEC 61326 specifies more detailed test
configurations, operational conditions and performance criteria for equipment with test and
measurement circuits (internal or, external to the equipment, or both) that are not EMC
protected for operational and/or functional reasons, as specified by the manufacturer.
The manufacturer specifies the environment for which the product is intended to be used and
selects the appropriate test level specifications of IEC 61326-1:2020.
NOTE Examples of equipment include, but are not limited to, oscilloscopes, logic analysers, spectrum analysers,
network analysers, analogue instruments, digital multimeters (DMM) and board test systems.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61326-2-2:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems (IEC 61326-2-2:2020)
EN IEC 61326-2-2:2021

In addition to the scope of IEC 61326-1, this part of IEC 61326 specifies more detailed test
configurations, operational conditions and performance criteria for equipment covered by
Annex A of IEC 61326-1:2020 which is:
– used for testing, measuring or monitoring of protective measures in low-voltage
distribution systems, and;
– powered by battery and/or from the circuit measured, and
– portable.
Examples of such EUTs include, but are not limited to, voltage detectors, insulation testers,
earth continuity testers, earth resistance testers, leakage current clamps, loop impedance
testers, “residual-current-device-testers” (RCD-testers) and phase sequence testers as
defined in IEC 61557 (all parts).
NOTE Particular EMC requirements for equipment covered by IEC 61557-8 and IEC 61557-9 are given in
IEC 61326-2-4.
The manufacturer specifies the environment for which the product is intended to be used
and/or selects the appropriate test level specifications of IEC 61326-1.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61326-2-5:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditionsand performance criteria for field devices with field bus interfaces according to IEC 61784-1 (IEC 61326-2-5:2020)
EN IEC 61326-2-5:2021

In addition to the requirements of IEC 61326-1, this part of IEC 61326 treats the particular
features for EMC testing of field devices with field bus interfaces. This part of IEC 61326 covers
only the field bus interface of the equipment.
NOTE The other functions of the equipment remain covered by other parts of IEC 61326 series.
This part refers only to field devices intended for use in process control and process measuring.
In this document, field devices with interfaces according to IEC 61784-1:2019, CP 3/2 and
CP 1/1 as defined in IEC 61784 are covered. Other field bus interfaces may be included in
future editions of this document.
IEC 61784-1:2019 specifies a set of protocol specific communication profiles based on
IEC 61158.
The manufacturer specifies the environment for which the product is intended to be used and/or
selects the appropriate test level specifications of IEC 61326-1.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61326-1:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2020)
EN IEC 61326-1:2021

This part of IEC 61326 specifies requirements for immunity and emissions regarding electromagnetic
compatibility (EMC) for electrical equipment, operating from a supply or battery of
less than 1 000 V AC or 1 500 V DC or from the circuit being measured. Equipment intended
for professional, industrial-process, industrial-manufacturing and educational use is covered
by this part. It includes equipment and computing devices for
– measurement and test;
– control;
– LABORATORY use;
– accessories intended for use with the above (such as sample handling equipment),
intended to be used in industrial and non-industrial locations.
Computing devices and assemblies and similar equipment within the scope of information
technology equipment (ITE) and complying with applicable ITE EMC standards can be used in
systems within the scope of this part of IEC 61326 without additional testing, if they are
suitable for the intended electromagnetic environment.
It is generally considered that this product family standard takes precedence over the
corresponding generic EMC standards.
The following equipment is covered by this document.
a) Electrical measurement and test equipment
This is equipment which, by electrical means, measures, indicates or records one or more
electrical or non-electrical quantities, also non-measuring equipment such as signal
generators, measurement standards, power supplies and transducers.
b) Electrical control equipment
This is equipment which controls one or more output quantities to specific values, with
each value determined by manual settings, by local or remote programming, or by one or
more input variables. This includes industrial process measurement and control (IPMC)
equipment, which consists of devices such as:
– process controllers and regulators;
– programmable controllers;
– power supply units for equipment and systems (centralized or dedicated);
– analogue/digital indicators and recorders;
– process instrumentation;
– transducers, positioners, intelligent actuators, etc.
c) Electrical LABORATORY equipment, including In Vitro Diagnostic (IVD) medical equipment
This is equipment used to prepare or analyse materials, or measure, indicate or monitor
physical quantities. This equipment might also be used in areas other than laboratories.
d) Equipment a), b) or c) as above when being equipped with components having radio
functionality, for example for wireless communication.
Equipment within the scope of this document might be operated in different electromagnetic
environments; depending on the electromagnetic environment different emission and immunity
test requirements are applicable.
This document considers three types of electromagnetic environments:
• BASIC ELECTROMAGNETIC ENVIRONMENT;
• INDUSTRIAL ELECTROMAGNETIC ENVIRONMENT;
• CONTROLLED ELECTROMAGNETIC ENVIRONMENT.
Corresponding immunity test requirements are described in Clause 6.
In terms of emission requirements, equipment shall be classified in Class A or Class B
equipment, as per the requirements and procedure of CISPR 11. The corresponding emission
requirements are described in Clause 7.
The specified emission and immunity requirements aim at achieving electromagnetic
compatibility between equipment covered in this document and other equipment that might
operate at locations with electromagnetic environments considered in this document.
Guidance for an assessment concerning the risk for achieving EMC is given in Annex B.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61326-2-4:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 (IEC 61326-2-4:2020)
EN IEC 61326-2-4:2021

In addition to IEC 61326-1, this part of IEC 61326 specifies more detailed test configurations,
operational conditions and performance criteria than IEC 61326-1 for equipment for
– insulation monitoring according to IEC 61557-8;
– insulation fault location according to IEC 61557-9.
This applies to insulation monitoring devices and for equipment for insulation fault location
systems permanently or semi-permanently connected to the distribution system.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61326-2-6:2021(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (IEC 61326-2-6:2020)
EN IEC 61326-2-6:2021

In addition to the scope of IEC 61326-1, this part of IEC 61326 specifies minimum
requirements for immunity and emissions regarding electromagnetic compatibility for IN VITRO
DIAGNOSTIC (IVD) MEDICAL EQUIPMENT, taking into account the particularities and specific
aspects of this electrical equipment and their electromagnetic environment.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61326-2-6:2013(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (IEC 61326-2-6:2012)
EN 61326-2-6:2013

In addition to the scope of IEC 61326-1, this part of IEC 61326 series specifies minimum requirements for immunity and emissions regarding electromagnetic compatibility for in vitro diagnostic medical equipment, taking into account the particularities and specific aspects of this electrical equipment and their electromagnetic environment.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61326-2-3:2013(Main)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning (IEC 61326-2-3:2012)
EN 61326-2-3:2013

In addition to the requirements of IEC 61326-1, this part specifies more detailed test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning. This standard applies only to transducers characterized by their ability to transform, with the aid of an auxiliary energy source, a non-electric quantity to a process-relevant electrical signal, and to output the signal at one or more ports. This standard includes transducers for electrochemical and biological measured quantities. The transducers covered by this standard may be powered by a.c. or d.c. voltage and/or by battery or with internal power supply. Transducers referred to by this standard comprise at least the following items (see Figures 101 and 102): - one or more elements for transforming a non-electrical input quantity to an electrical quantity; - a transmission link for transferral of the electrical quantity to a component for signal conditioning; - a unit for signal conditioning that converts the electrical quantity to a process-relevant electrical signal; - an enclosure for enclosing the above-stated components fully or in parts. Transducers referred to by this standard may also have the following items (see Figures 101 and 102): - a communication and control unit; - a display unit; - control elements such as keys, buttons, switches, etc.; - transducer output signals (for example, switch outputs, alarm outputs) which are clearly assigned to the input signal(s); - transducers with signal conditioning which may be integrated or remote. The manufacturer specifies the environment for which the product is intended to be used and utilizes the corresponding test levels of IEC 61326-1. Additional requirements and exceptions for specific types of transducers are given in the annexes to this standard.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day