SIST EN 15069:2008
(Main)Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
The objective of this European Standard is to achieve the safe operation of gas connection valves for use with metal hose assemblies by specifying the requirements of performance, materials and test methods.
Metal hose assemblies are referred to in prEN 14800 and prEN ? (WI 00236006).
These valves are suitable for connection to domestic appliances inside or outside a dwelling using gas at a pressure of up to and including 0,5 bar.
These valves are designed for the use with movable appliances; they may also be used for the connection of fixed appliances.
The term gas relates to the first, second and third families as referred to in EN 437,Table 1.
Sicherheitsgasanschlussarmaturen für den Anschluss von Gasgeräten mit Gasschlauchleitungen in der Hausinstallation für brennbare Gase
Diese Armaturen sind für die Verbindung von fest installierten Gaszuführungsleitungen an Haushalts Gas¬geräte im Inneren oder außerhalb von Wohnungen für Gase der 2. und 3. Familie und bei einem Gasdruck bis zu 0,5 bar geeignet.
Diese Armaturen sind zum Gebrauch mit entweder beweglichen Geräten oder für den Anschluss von fest installierten Geräten ausgelegt.
Dispositifs de raccordement de sécurité pour appareils a usage domestique utilisant les combustibles gazeux et alimentés par tuyau métallique onduleux
L'objectif de la présente Norme Européenne est de garantir la sécurité d'utilisation des dispositifs de raccordement
de sécurité pour gaz, destinés a etre utilisés avec des tuyaux flexibles métalliques onduleux en définissant les
exigences relatives aux performances, aux matériaux et les techniques d'essais.
Les tuyaux flexibles métalliques font l?objet des normes prEN 14800 et du prEN 15070.
Ces dispositifs de raccordement de sécurité sont destinés aux raccordements d'appareils a usage domestique
utilisant le gaz a une pression inférieure ou égale a 0,5 bar a l'intérieur ou a l'extérieur d'une habitation.
Ces dispositifs de raccordement sont conçus pour etre utilisés avec des appareils mobiles. Ils peuvent également
etre utilisés pour le raccordement d?appareils fixes.
Le terme «gaz» fait référence aux gaz des premiere, deuxieme et troisieme familles comme spécifié dans le
Tableau 1 de la EN 437.
Varnostni plinski ventili za kovinske cevne priključke za priključitev gospodinjskih plinskih aparatov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15069:2008
01-september-2008
9DUQRVWQLSOLQVNLYHQWLOL]DNRYLQVNHFHYQHSULNOMXþNH]DSULNOMXþLWHYJRVSRGLQMVNLK
SOLQVNLKDSDUDWRY
Safety gas connection valves for metal hose assemblies used for the connection of
domestic appliances using gaseous fuel
Sicherheitsgasanschlussarmaturen für den Anschluss von Gasgeräten mit
Gasschlauchleitungen in der Hausinstallation für brennbare Gase
Dispositifs de raccordement de sécurité pour appareils a usage domestique utilisant les
combustibles gazeux et alimentés par tuyau métallique onduleux
Ta slovenski standard je istoveten z: EN 15069:2008
ICS:
23.060.01 Ventili na splošno Valves in general
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
SIST EN 15069:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15069:2008
---------------------- Page: 2 ----------------------
SIST EN 15069:2008
EUROPEAN STANDARD
EN 15069
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2008
ICS 23.060.40; 91.140.40
English Version
Safety gas connection valves for metal hose assemblies used
for the connection of domestic appliances using gaseous fuel
Dispositifs de raccordement de sécurité pour appareils à Sicherheitsgasanschlussarmaturen für den Anschluss von
usage domestique utilisant les combustibles gazeux et Gasgeräten mit Gasschlauchleitungen in der
alimentés par tuyau métallique onduleux Hausinstallation für brennbare Gase
This European Standard was approved by CEN on 2 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15069:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
Contents Page
Foreword.5
Introduction .6
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 General requirements.9
4.1 SC valve types.9
4.2 Classification.10
4.2.1 Temperature classes .10
4.2.2 Pressure classes.10
4.3 Construction requirements.10
4.3.1 General.10
4.3.2 Materials .11
4.3.3 Nominal sizes.11
4.4 Construction.11
4.5 Connection .12
4.5.1 General.12
4.5.2 Connection and disconnection .12
4.5.3 Disconnection .12
4.5.4 Rotation .12
4.6 Operation .12
4.6.1 General.12
4.6.2 Manual operated control (if fitted).12
4.7 Dangerous substances .12
5 Performance requirements and tests .13
5.1 General.13
5.2 Test end fittings .13
5.3 Test sequence schedule .13
5.4 Leak-tightness.15
5.4.1 Angular seal .15
5.4.2 External leak-tightness .15
5.4.3 Internal leak-tightness.16
5.5 Internal Pressure.16
5.5.1 Requirements.16
5.5.2 Test.17
5.6 Rated flow rate .17
5.6.1 Requirements.17
5.6.2 Test.17
5.7 Tensile strength resistance .19
5.7.1 Requirements.19
5.7.2 Tests.19
5.8 Bending resistance.20
5.8.1 Requirements.20
5.8.2 Tests.20
5.9 Resistance to torsion .20
5.9.1 Requirements.20
5.9.2 Tests.20
5.10 Resistance to impact.21
5.10.1 Requirements.21
2
---------------------- Page: 4 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
5.10.2 Tests .21
5.11 Durability .22
5.11.1 Durability of the manually operated control SC valve.22
5.11.2 Durability of connection and disconnection .23
5.11.3 Rotation durability of the SC valve outlet.23
5.11.4 Temperature durability - Thermal ageing.23
5.12 High and low temperature resistance .24
5.12.1 Low temperature resistance.24
5.12.2 High temperature resistance (only for SC valve without TSD).26
5.12.3 Leak-tightness during thermal load (only for SC valve with TSD) .26
5.13 Resistance to lubricants.26
5.13.1 General .26
5.13.2 Requirement.26
5.13.3 Test .26
5.14 Reaction to fire .27
5.14.1 Requirement.27
5.14.2 Testing and assessment methods.27
5.15 Resistance to gas .27
5.15.1 General .27
5.15.2 Requirement.27
5.15.3 Test .27
5.16 Corrosion resistance.28
5.16.1 Requirement.28
5.16.2 Test .28
5.17 Operating torque for a manually operated control SC valve .28
5.17.1 Requirement.28
5.17.2 Test .28
5.18 Operating strength for a safety quick connection SC valve.29
5.18.1 Requirement.29
5.18.2 Test .29
5.19 Stop resistance.29
5.19.1 Requirement.29
5.19.2 Test .30
5.20 SC valves type 2 and 4.30
5.20.1 Leak-tightness of the OSD.30
5.20.2 Overflow safety rate .30
5.20.3 Overflow safety durability.31
5.20.4 Normal flow durability.31
5.21 Electrical continuity .32
5.21.1 Requirement.32
5.21.2 Test .32
5.22 Leak-tightness of the system with non-metal components.32
5.22.1 Requirement.32
5.22.2 Test .32
5.23 SC valves type 3 and 4.33
5.23.1 Reaction to temperature .33
6 Evaluation of conformity .33
6.1 General .33
6.2 Type testing .33
6.2.1 Initial type testing (ITT) .33
6.2.2 Subsequent type testing.34
6.3 Factory production control (FPC).34
6.3.1 General .34
6.3.2 FPC requirements for all manufacturers.34
6.3.3 Manufacturer-specific FPC system requirements .36
6.4 Installation instructions.37
6.5 Packaging.38
3
---------------------- Page: 5 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
Annex A (informative) SC valve and hose fitting design requirements for connection to the gas
supply pipework or to the pressure reduction device of portable gas bottles .39
Annex B (informative) Test end fitting .58
Annex ZA (informative) Clauses of this European Standard addressing the provision of the EU
Construction Products Directive.59
ZA.1 Scope and relevant characteristics .59
ZA.2 Procedure for attestation of conformity of SC valves .60
ZA.2.1 System of attestation of conformity .60
ZA.2.2 EC Certificate and Declaration of conformity.63
ZA.3 CE marking and labeling.64
Bibliography .66
4
---------------------- Page: 6 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
Foreword
This document (EN 15069:2008) has been prepared by Technical Committee CEN/TC 236 “Non industrial
manually operated shut-off valves for gas and particular combinations valves-other products”, the secretariat
of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2008, and conflicting national standards shall be
withdrawn at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC.
For relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
5
---------------------- Page: 7 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
Introduction
This European Standard contains product characteristics relating to the safety of persons, animal and property
and the protection of their environment.
The objective of this European Standard is to achieve safe operation of connection valves by specifying the
requirements of performance, materials and test methods.
Safety gas connection valves are used internally to connect gas appliances including movable gas appliances
and externally to connect appliances such as grills, gas radiation heating, lights etc.
Valves manufactured to this European Standard are designed to be used with compatible hose assemblies
conforming to EN 14800 and prEN 15070:2007.
Attention is drawn to the need for careful quality control as given in EN ISO 9001:2000.
This European Standard is based on a balance of requirements given by the major national European Gas
Authorities for valves and metal hose assemblies for the connection of domestic gas appliances.
It reflects the recognised practise and technology of products approved today as well as the present culture of
usage by the consumer.
The introduction of new technologies supported by National Gas Authorities may require the adoption of this
European Standard regarding individual requirements and tests.
1 Scope
These valves are suitable for connection of the fixed gas supply system to domestic appliances inside or
nd rd
outside a dwelling using 2 or 3 Family gases and at a pressure of up to and including 0,5 bar.
These valves are designed for the use with either movable appliances or for the connection of fixed
appliances.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 377, Lubricants for applications in appliances and associated controls using combustible gases except
those designed for use in industrial processes
EN 437:2003, Test gases — Test pressures — Appliance categories
EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 1503-1, Valves — Materials for bodies, bonnets and covers — Part 1: Steels specified in European
Standards
EN 1503-3, Valves — Materials for bodies, bonnets and covers — Part 3: Cast irons specified in European
Standards
6
---------------------- Page: 8 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
EN 1503-4, Valves — Materials for bodies, bonnets and covers — Part 4: Copper alloys specified in European
Standards
EN 1775:2007, Gas supply — Gas pipework for buildings — Maximum operating pressure less than or equal
to 5 bar — Functional recommendations
EN 10222 (all parts), Steel forgings for pressure purposes
EN 10277-3, Bright steel products — Technical delivery conditions — Part 3: Free-cutting steels
EN 13501-1:2007, Fire classification of construction products and building elements — Part 1: Classification
using data from reaction to fire tests
EN 60335-1:2002, Household and similar electrical appliances — Safety — Part 1: General requirements
(IEC 60335-1:2001, modified)
EN ISO 9001:2000, Quality management systems — Requirements (ISO 9001:2000)
EN ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227:2006)
EN ISO 11925-2, Reaction to fire tests — Ignitability of building products subjected to direct impingement of
flame — Part 2: Single-flame source test (ISO 11925-2:2002)
ISO 1817:2005, Rubber, vulcanized — Determination of the effect of liquids
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 Connections
3.1.1
safety connection valve
component which permits or interrupts the flow of gas by the movement of a closure device which is operated
by the connection or disconnection of a metal hose assembly where the valve inlet is connected to the gas
installation pipework and whose outlet connects mechanically to the metal hose assembly and prevents any
gas flow if the hose assembly is disconnected.
In addition it can incorporate an overflow safety device or a thermal safety device.
It also can be combined with a manually operated valve
3.1.2
safety quick connection
end fitting consisting of two parts that is designed to permit quick connection and disconnection without tools,
the device is leak-tight such that it prevents the release of gas from the upstream pipe work when
disconnected and is designed to prevent accidental disconnection and incorrect operation
3.1.3
threaded connection
connection which is gas tight achieved either by metal to metal contact in the thread or by assistance of a
gasket. This connection can only be assembled and disassembled with an appropriate tool
3.2
SC valve
abbreviation used in this European Standard to denote a safety connection valve as defined in 3.1
7
---------------------- Page: 9 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
3.3
domestic appliance
appliance intended for use by individual householders inside or outside a dwelling
3.4
standard reference conditions
conditions to which all measured values are corrected (temperature: 15 °C, absolute pressure 101,325 Pa, dry
air)
3.5
SC valve inlet
part of the SC valve which is connected to the gas installation pipe
3.6
SC valve outlet
part of the SC valve which is connected to the assembly
3.7 Leak-tightness
3.7.1
external leak-tightness
leak-tightness of a gas carrying component with respect to atmosphere. Distinction shall be made between:
external leak-tightness with the SC valve connected;
external leak-tightness with the SC valve disconnected
3.7.2
internal leak-tightness
leak-tightness between the inlet and outlet of the manually operated device of the SC valve (if it exists), with
the closure device moved to the closed position
3.8 Pressures
3.8.1
inlet pressure
pressure at the inlet of the SC valve
3.8.2
outlet pressure
pressure at the outlet of the SC valve
3.8.3
maximum operating pressure (MOP)
maximum pressure at which a SC valve can be operated continuously, under normal operating conditions
3.8.4
test pressure
pressure to be applied during the test
3.8.5
pressure drop
difference between the inlet and the outlet pressures
8
---------------------- Page: 10 ----------------------
SIST EN 15069:2008
EN 15069:2008 (E)
3.9 Flow
3.9.1
rated flow rate
flow rate of air under standard reference conditions, at a given pressure drop
3.9.2
overflow safety device (OSD)
safety device which automatically interrupts the flow of gas if it exceeds a preset value
3.9.3
overflow safety level
flow rate of air at which the overflow safety device interrupts the flow of gas
3.10 Temperatures
3.10.1
maximum operating temperature (MOT)
maximum temperature at which a SC valve can be operated continuously, under normal operating conditions
3.10.2
minimum operating temperature (mOT)
lowest temperature at which a SC valve can be operated continuously, under normal operating conditions
3.10.3
thermal safety device (TSD)
device that automatically shuts off the flow of gas when th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.