oSIST prEN ISO 3834-1:2021
(Main)Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO/DIS 3834-1:2020)
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO/DIS 3834-1:2020)
Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil 1: Kriterien für die Auswahl der geeigneten Stufe der Qualitätsanforderungen (ISO/DIS 3834-1:2020)
Dieses Dokument beschreibt die allgemeine Auslegung der Normenreihe ISO 3834 und die zu beachtenden Kriterien für die Auswahl der geeigneten Stufe der Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen, aus den drei festgelegten Stufen in ISO 3834-2[1], ISO 3834-3[2] und ISO 3834-4[3]. Es gilt für die Herstellung, sowohl in Werkstätten als auch auf Baustellen.
ANMERKUNG 1 ISO 3834-2, ISO 3834-3 und ISO 3834-4 enthalten komplette Sätze von Qualitätsanforderungen zur Prozesskontrolle für alle Schmelzschweißprozesse (für einen einzelnen Prozess oder in einer festgelegten Kombination). ISO 3834-5 legt die Dokumente fest, deren Anforderungen erfüllt werden müssen, um die Übereinstimmung mit den Qualitätsanforderungen nach ISO 3834-2, ISO 3834-3 oder ISO 3834-4 nachzuweisen.
Dieses Dokument legt keine Anforderungen für ein Qualitätsmanagementsystem fest. Aber Abschnitt 6 enthält Elemente eines Qualitätsmanagementsystems, deren Einschluss ISO 3834 ergänzt.
ANMERKUNG 2 ISO 3834-2, ISO 3834-3 und ISO 3834-4 dürfen für sich allein oder in Verbindung mit ISO 9001:2015 vom Hersteller angewendet werden.
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 1: Critères pour la sélection du niveau approprié d'exigences de qualité (ISO/DIS 3834-1:2020)
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 1. del: Merila za izbiro ustrezne stopnje zahtev za kakovost (ISO/DIS 3834-1:2020)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 3834-1:2021
01-januar-2021
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 1. del: Merila za
izbiro stopenj sprejemljivosti (ISO/DIS 3834-1:2020)Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the
selection of the appropriate level of quality requirements (ISO/DIS 3834-1:2020)Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil
1: Kriterien für die Auswahl der geeigneten Stufe der Qualitätsanforderungen (ISO/DIS
3834-1:2020)Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 1:
Critères pour la sélection du niveau approprié d'exigences de qualité (ISO/DIS 3834-
1:2020)Ta slovenski standard je istoveten z: prEN ISO 3834-1
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 3834-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 3834-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3834-1:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3834-1
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-11-26 2021-02-18
Quality requirements for fusion welding of metallic
materials —
Part 1:
Criteria for the selection of the appropriate level of quality
requirements
Exigences de qualité en soudage par fusion des matériaux métalliques —
Partie 1: Critères pour la sélection du niveau approprié d'exigences de qualité
ICS: 25.160.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3834-1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3834-1:2021
ISO/DIS 3834-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3834-1:2021
ISO/DIS 3834-1:2020(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 General outline of ISO 3834 ...................................................................................................................................................................... 2
5 Selection of the appropriate level of quality requirements .................................................................................... 3
6 Processes to be considered for a quality management system to complement ISO 3834 .......3
Annex A (informative) Criteria which assist in the selection of ISO 3834-2, ISO 3834-3 or
ISO 3834-4 ................................................................................................................................................................................................................... 5
Bibliography ................................................................................................................................................................................................................................ 7
© ISO 2020 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 3834-1:2021
ISO/DIS 3834-1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding.This third edition cancels and replaces the second edition (ISO 3834-1:2005), which has been technically
revised.Any feedback, question or request for official interpretation related to any aspect of this document
should be directed to the Secretariat of ISO/TC 44/SC 10 via your national standards body. A complete
listing of these bodies can be found at www .iso .org/ members .html. Official interpretations, where they
exist, are available from this page: https:// committee .iso .org/ sites/ tc44/ home/ interpretation .html.
The main changes compared to the previous edition are as follows:— Standard was editorially revised;
— references to sub-clauses in ISO 9001 were updated.
A list of all parts in the ISO 3834 series can be found on the ISO website.
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 3834-1:2021
ISO/DIS 3834-1:2020(E)
Introduction
Processes such as fusion welding are widely used to manufacture many products. In some companies, they
are the key feature of production. Products may range from simple to complex. Examples include pressure
vessels, domestic and agricultural equipment, cranes, bridges, transport vehicles and other items.
These processes exert a profound influence on the cost of manufacture and quality of the product. It is
important, therefore, to ensure that these processes are carried out in the most effective way and that
appropriate control is exercised over all aspects of the operation.It is emphasised that the ISO 3834 series is not a quality management system standard replacing
ISO 9001:2015. However, it can be a useful tool when ISO 9001:2015 is applied by manufacturers.
Specification of quality requirements for welding processes is important because the quality of these
processes cannot be readily or economically validated. Therefore, they are considered to be special
processes as noted by ISO 9000:2015.Quality cannot be inspected into a product: quality has to be built in. Even the most extensive and
sophisticated non-destructive testing does not improve the quality of the product.
For products to be free from serious problems in production and in service, it is necessary to provide
controls, from the design phase, through material selection, into manufacture and subsequent
inspection. For example, poor design may create serious and costly difficulties in the workshop, on site,
or in service. Incorrect material selection may result in problems, such as cracking in welded joints.
To ensure sound and effective manufacturing, management needs to understand and appreciate the
sources of potential trouble and to implement appropriate procedures for their control.
The ISO 3834 series identifies measures that are applicable for different situations. Typically, they may
be applied in the following circumstances:— in contractual situations: specification of welding quality requirements;
— by manufacturers: establishment and maintenance of welding quality requirements;
— by committees drafting manufacturing codes or application standards: specification of welding
quality requirements;— by organizations assessing welding quality performance, e.g. third parties, customers, or
manufacturers.The ISO 3834 series can be used by internal and external organizations, including certification
bodies, to assess the manufacturer's ability to meet customer, regulatory or the manufacturer's own
requirements.© ISO 2020 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 3834-1:2021
---------------------- Page: 8 ----------------------
oSIST prEN ISO 3834-1:2021
DRAFT INTERNATIONAL STANDARD ISO/DIS 3834-1:2020(E)
Quality requirements for fusion welding of metallic
materials —
Part 1:
Criteria for the selection of the appropriate level of quality
requirements
1 Scope
This document provides a general outline of the ISO 3834 series and criteria to be taken into account
for the selection of the appropriate level of quality requirements for fusion welding of metallic
[1] [2] [3]materials, among the three levels specified in ISO 3834-2 , ISO 3834-3 and ISO 3834-4 . It applies
to manufacturing, both in workshops and at field installation sites.NOTE 1 ISO 3834-2, ISO 3834-3 and ISO 3834-4 provide complete sets of quality requirements for process
control related to all fusion welding processes (for each process separately or in combination as specified).
ISO 3834-5 specifies the documents with which it is necessary to conform to claim conformity to the quality
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.