SIST EN ISO 3834-5:2022
(Main)Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
This document specifies the International Standards, including clauses and subclauses, with which
conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 can be claimed.
NOTE For brazing, see ISO 22688.
Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil 5: Dokumente, deren Anforderungen erfüllt werden müssen, um die Übereinstimmung mit den Qualitätsanforderungen nach ISO 3834 2, ISO 3834 3 oder ISO 3834 4 nachzuweisen (ISO 3834 5:2021)
Dieses Dokument legt die Internationalen Normen fest, deren Anforderungen erfüllt werden müssen, um die Übereinstimmung mit den Qualitätsanforderungen nach ISO 3834-2, ISO 3834-3 oder ISO 3834-4 nachzuweisen. Es kann nur in Verbindung mit ISO 3834-2, ISO 3834-3 oder ISO 3834-4 angewendet werden.
ANMERKUNG Zum Hartlöten siehe ISO 22688.
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 5: Documents auxquels il est nécessaire de se conformer pour déclarer la conformité aux exigences de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4 (ISO 3834-5:2021)
Le présent document spécifie les Normes internationales, y compris leur articles et paragraphes avec lesquelles la conformité aux exigences de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4 peut être déclarée.
NOTE Pour le brasage fort, voir l’ISO 22688.
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 5. del: Dokumenti, katerih zahteve morajo biti izpolnjene, da se ustvari domneva o skladnosti z zahtevami za kakovost iz ISO 3834-2, ISO 3834-3 ali ISO 3834-4 (ISO 3834-5:2021)
Ta dokument določa mednarodne standarde, vključno s točkami in podtočkami, za katere je mogoče ustvariti domnevo o skladnosti z zahtevami za kakovost iz standarda ISO 3834-2, ISO 3834-3 ali ISO 3834-4. OPOMBA: Za spajkanje glej standard ISO 22688.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3834-5:2022
01-marec-2022
Nadomešča:
SIST EN ISO 3834-5:2015
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 5. del: Dokumenti,
katerih zahteve morajo biti izpolnjene, da se ustvari domneva o skladnosti z
zahtevami za kakovost iz ISO 3834-2, ISO 3834-3 ali ISO 3834-4 (ISO 3834-5:2021)
Quality requirements for fusion welding of metallic materials - Part 5: Documents with
which it is necessary to conform to claim conformity to the quality requirements of ISO
3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil
5: Dokumente, deren Anforderungen erfüllt werden müssen, um die Übereinstimmung
mit den Qualitätsanforderungen nach ISO 3834 2, ISO 3834 3 oder ISO 3834 4
nachzuweisen (ISO 3834 5:2021)
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 5:
Documents auxquels il est nécessaire de se conformer pour déclarer la conformité aux
exigences de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4 (ISO 3834-5:2021)
Ta slovenski standard je istoveten z: EN ISO 3834-5:2021
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 3834-5:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3834-5:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 3834-5:2022
EN ISO 3834-5
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2021
EUROPÄISCHE NORM
ICS 25.160.10 Supersedes EN ISO 3834-5:2015
English Version
Quality requirements for fusion welding of metallic
materials - Part 5: Documents with which it is necessary to
conform to claim conformity to the quality requirements
of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-
5:2021)
Exigences de qualité en soudage par fusion des Qualitätsanforderungen für das Schmelzschweißen von
matériaux métalliques - Partie 5: Documents auxquels metallischen Werkstoffen - Teil 5: Dokumente, deren
il est nécessaire de se conformer pour déclarer la Anforderungen erfüllt werden müssen, um die
conformité aux exigences de qualité de l'ISO 3834-2, Übereinstimmung mit den Anforderungen nach ISO
l'ISO 3834-3 ou l'ISO 3834-4 (ISO 3834-5:2021) 3834-2, ISO 3834-3 oder ISO 3834-4 nachzuweisen
(ISO 3834-5:2021)
This European Standard was approved by CEN on 10 August 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3834-5:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3834-5:2022
EN ISO 3834-5:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3834-5:2022
EN ISO 3834-5:2021 (E)
European foreword
This document (EN ISO 3834-5:2021) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2022, and conflicting national standards shall be
withdrawn at the latest by April 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3834-5:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3834-5:2021 has been approved by CEN as EN ISO 3834-5:2021 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3834-5:2022
---------------------- Page: 6 ----------------------
SIST EN ISO 3834-5:2022
INTERNATIONAL ISO
STANDARD 3834-5
Third edition
2021-10
Quality requirements for fusion
welding of metallic materials —
Part 5:
Documents with which it is necessary
to conform to claim conformity to the
quality requirements of ISO 3834-2,
ISO 3834-3 or ISO 3834-4
Exigences de qualité en soudage par fusion des matériaux
métalliques —
Partie 5: Documents auxquels il est nécessaire de se conformer pour
déclarer la conformité aux exigences de qualité de l'ISO 3834-2,
l'ISO 3834-3 ou l'ISO 3834-4
Reference number
ISO 3834-5:2021(E)
© ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 3834-5:2022
ISO 3834-5:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 3834-5:2022
ISO 3834-5:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Documents with which to claim conformity with the quality requirements of
ISO 3834-2, ISO 3834-3 or ISO 3834-4 . 1
4.1 General . 1
4.2 Applicability . 2
4.3 Certificate . 2
Bibliography . 5
iii
© ISO 2021 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 3834-5:2022
ISO 3834-5:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding, in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 121, Welding and allied processes,
in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 3834-5:2015), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— Annex A has been deleted;
— the list of welding processes has been expanded, e.g. laser-arc hybrid welding;
— normative references have been moved to the bibliography as none are referenced normatively in
the document.
A list of all parts in the ISO 3834 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
Official interpretations of ISO/TC 44 documents, where they exist, are available from this page:
https://committee.iso.org/sites/tc44/home/interpretation.html.
iv
© ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 3834-5:2022
INTERNATIONAL STANDARD ISO 3834-5:2021(E)
Quality requirements for fusion welding of metallic
materials —
Part 5:
Documents with which it is necessary to conform to claim
conformity to the quality requirements of ISO 3834-2,
ISO 3834-3 or ISO 3834-4
1 Scope
This document specifies the International Standards, including
...
SLOVENSKI STANDARD
oSIST prEN ISO 3834-5:2021
01-januar-2021
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 5. del: Dokumenti,
katerih zahteve morajo biti izpolnjene, da se ustvari domneva o skladnosti z
zahtevami za kakovost iz ISO 3834-2, ISO 3834-3 ali ISO 3834-4 (ISO/DIS 3834-
5:2020)
Quality requirements for fusion welding of metallic materials - Part 5: Documents with
which it is necessary to conform to claim conformity to the quality requirements of ISO
3834-2, ISO 3834-3 or ISO 3834-4 (ISO/DIS 3834-5:2020)
Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil
5: Dokumente, deren Anforderungen erfüllt werden müssen, um die Übereinstimmung
mit den Anforderungen nach ISO 3834-2, ISO 3834-3 oder ISO 3834-4 nachzuweisen
(ISO/DIS 3834-5:2020)
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 5:
Documents auxquels il est nécessaire de se conformer pour déclarer la conformité aux
exigences de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4 (ISO/DIS 3834-
5:2020)
Ta slovenski standard je istoveten z: prEN ISO 3834-5
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 3834-5:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 3834-5:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3834-5:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3834-5
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-11-26 2021-02-18
Quality requirements for fusion welding of metallic
materials —
Part 5:
Documents with which it is necessary to conform to claim
conformity to the quality requirements of ISO 3834-2, ISO
3834-3 or ISO 3834-4
Exigences de qualité en soudage par fusion des matériaux métalliques —
Partie 5: Documents auxquels il est nécessaire de se conformer pour déclarer la conformité aux exigences
de qualité de l'ISO 3834-2, l'ISO 3834-3 ou l'ISO 3834-4
ICS: 25.160.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3834-5:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3834-5:2021
ISO/DIS 3834-5:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3834-5:2021
ISO/DIS 3834-5:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Documents with which it is necessary to conform to claim conformity to the quality
requirements of ISO 3834-2, ISO 3834-3, or ISO 3834-4 . 1
4.1 General . 1
4.2 ISO documents . 2
4.3 Applicability . 4
4.4 Certificate . 4
Bibliography . 7
© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 3834-5:2021
ISO/DIS 3834-5:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding.
Any feedback, question or request for official interpretation related to any aspect of this document
should be directed to the Secretariat of ISO/TC 44/SC 10 via your national standards body. A complete
listing of these bodies can be found at www .iso .org/members .html. Official interpretations, where they
exist, are available from this page: https:// committee .iso .org/ sites/ tc44/ home/ interpretation .html.
This third edition cancels and replaces the second edition (ISO 3834-5:2015), which has been technically
revised. The main changes compared to the previous edition are as follows:
— Annex A and reference to it has been deleted;
— the list of welding processes has been expanded, e. g. laser-arc hybrid welding.
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 3834-5:2021
DRAFT INTERNATIONAL STANDARD ISO/DIS 3834-5:2020(E)
Quality requirements for fusion welding of metallic
materials —
Part 5:
Documents with which it is necessary to conform to claim
conformity to the quality requirements of ISO 3834-2, ISO
3834-3 or ISO 3834-4
1 Scope
This document specifies the International Standards with which it is necessary to conform to claim
conformity to the quality requirements of ISO 3834 2, ISO 3834 3, or ISO 3834 4. It can only be used in
conjunction with ISO 3834 2, ISO 3834 3, or ISO 3834 4.
NOTE For brazing, see ISO 22688.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Documents with which it is necessary to conform to claim conformity to the
quality requirements of ISO 3834-2, ISO 3834-3, or ISO 3834-4
4.1 General
Conformity to the quality requirements of ISO 3834-2, ISO 3834-3, or ISO 3834-4 shall be claimed by a
manufacturer in accordance with one or more of the following options:
a) adopting the ISO documents listed in 4.2;
b) adoption of other documents that provide technically equivalent conditions to the ISO documents
listed in 2.2;
c) adoption of different supporting standards, where these are required in application standards
used by the manufacturers.
© ISO 2020 – All rights reserved 1
---------------------- Page: 7 ----------------------
oSIST prEN ISO 3834-5:2021
ISO/DIS 3834-5:2020(E)
4.2 ISO documents
The following ISO documents are indispensable for the application of ISO 3834-2, ISO 3834-3,
or ISO 3834-4, as specified in 4.1. The latest edition of the referenced document (including any
amendments) applies.
ISO 9606-1, Qualification testing of welders — Fusion welding — Part 1: Steels
ISO 960
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.