Furniture - Assessment of the ignitability of mattresses and upholstered bed base - Part 2: Ignition source: match flame equivalent

This European Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases, when subjected to a gas flame as an ignition source.
Air mattresses and water beds are excluded from this standard.
The standard contains one annex:
Annex A (informative) Model test report form.

Möbel - Bewertung der Entzündbarkeit von Matratzen und gepolsterten Bettböden - Teil 2: Zündquelle: eine einem brennenden Streicholz vergleichbare Gasflamme

Diese Europäische Norm legt ein Prüfverfahren zur Bewertung der Entzündbarkeit von Matratzen und gepolsterten Bettböden fest, wenn diese einer Gasflamme als Zündquelle ausgesetzt sind.
Luftmatratzen und Wasserbetten werden in dieser Norm nicht behandelt.
Die Norm enthält einen Anhang:
Anhang A (informativ): Muster eines Prüfberichts.

Ameublement - Évaluation de l'allumabilité des matelas et des sommiers rembourrés - Partie 2: Source d'allumage: equivalente à l'allumette

La présente Norme européenne décrit une méthode d’essai pour évaluer l'allumabilité de matelas et de sommiers rembourrés lorsqu'ils sont soumis à une source d’allumage représentée par une flamme de gaz.
Les matelas à air et les lits à eau sont exclus de la présente norme.
La présente norme comporte une annexe :
Annexe A (informative) Modèle de rapport d’essai.

Pohištvo - Ugotavljanje vžigljivosti posteljnih vložkov in oblazinjenih podnožij - 2. del: Vir vžiga: enakovreden plamenu vžigalice

Ta standard določa preskusno metodo za oceno vžigljivosti posteljnih vložkov, oblazinjenih podnožij ali posteljnih nadvložkov, kadar so podvrženi plamenu, enakovrednemu plamenu vžigalice.

General Information

Status
Published
Public Enquiry End Date
30-Apr-2014
Publication Date
01-Feb-2016
Technical Committee
POH - Furniture
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Jan-2016
Due Date
13-Mar-2016
Completion Date
02-Feb-2016

Relations

Effective Date
01-Mar-2016

Overview - EN 597-2:2015 (Furniture - Mattress ignitability, match-flame equivalent)

EN 597-2:2015 is a CEN European standard that specifies a laboratory test method to assess the ignitability of mattresses, mattress pads and upholstered bed bases when exposed to a small gas flame designed to be equivalent to a burning match. The standard excludes air mattresses and water beds and includes an informative Annex A with a model test report form. This standard is part of the EN 597 series covering furniture ignitability and has been aligned with EN 597-1.

Key topics and technical requirements

  • Ignition source: a calibrated gas flame (match‑flame equivalent). The burner tube dimensions, gas flow control and flame height are specified to approximate a burning match (example given: calibrated butane flow of (45 ± 2) ml/min producing ~35 mm flame; burner tube dimensions are provided).
  • Test assemblies: both small‑scale (minimum 450 mm × 450 mm) and full‑size specimens are addressed; assemblies must represent the finished mattress/bed base construction, including edge finishes and cover tension.
  • Criteria of ignition: clear definitions for progressive smouldering ignition and flaming ignition are given (e.g., propagation, consumption within test duration, flaming > 120 s after removal of burner).
  • Apparatus and environment: requirements for test rig (mesh platform), test enclosure or room ventilation, clock accuracy and safe gas supply measurement (including notes on temperature equilibration and flow metering).
  • Conditioning and atmosphere: specimens and cigarettes conditioned at (23 ± 2) °C, 50 ± 5 % RH for at least 24 h; testing atmosphere between 10 °C and 30 °C and 15–80 % RH.
  • Health & safety: tests present significant hazards; recommendations on enclosures, extraction and suitable extinguishing means (water spray, extinguishers, immersion) are provided.
  • Reporting: Annex A supplies a model test report form with required test details.

Applications - who uses EN 597-2 and why

  • Mattress and upholstered bed-base manufacturers - to evaluate product performance during design and pre-production testing.
  • Independent test laboratories - to perform standardized ignitability testing for certification and compliance.
  • Regulators and safety assessors - to set product safety requirements and verify conformity.
  • Procurement teams and retailers - to specify safety requirements and compare supplier test evidence.
  • Product safety engineers - to guide material selection and fire-risk mitigation.

Practical uses include product development, compliance evidence for market entry, risk assessment, and supplier/retailer due diligence.

Related standards

  • EN 597-1 - mattress ignitability test using a different ignition source (cigarette); often used together with EN 597-2.
  • EN 1021-2 - referenced as the basis for the match‑flame equivalent ignition source.
  • Other national/regulatory furniture fire-safety standards (check local requirements).

Keywords: EN 597-2:2015, mattress ignitability, match flame equivalent, furniture safety standard, mattress fire testing, ignitability of mattresses.

Frequently Asked Questions

SIST EN 597-2:2016 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Furniture - Assessment of the ignitability of mattresses and upholstered bed base - Part 2: Ignition source: match flame equivalent". This standard covers: This European Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases, when subjected to a gas flame as an ignition source. Air mattresses and water beds are excluded from this standard. The standard contains one annex: Annex A (informative) Model test report form.

This European Standard specifies a test method to assess the ignitability of mattresses, upholstered bed bases, when subjected to a gas flame as an ignition source. Air mattresses and water beds are excluded from this standard. The standard contains one annex: Annex A (informative) Model test report form.

SIST EN 597-2:2016 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 97.140 - Furniture. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 597-2:2016 has the following relationships with other standards: It is inter standard links to SIST EN 597-2:1995. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase SIST EN 597-2:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pohištvo - Ugotavljanje vžigljivosti posteljnih vložkov in oblazinjenih podnožij - 2. del: Vir vžiga: enakovreden plamenu vžigaliceMöbel - Bewertung der Entzündbarkeit von Matratzen und gepolsterten Bettböden - Teil 2: Zündquelle: eine einem brennenden Streicholz vergleichbare GasflammeAmeublement - Évaluation de l'allumabilité des matelas et des sommiers rembourrés - Partie 2: Source d'allumage: equivalente à l'allumetteFurniture - Assessment of the ignitability of mattresses and upholstered bed base - Part 2: Ignition source: match flame equivalent97.140PohištvoFurniture13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN 597-2:2015SIST EN 597-2:2016en,fr,de01-marec-2016SIST EN 597-2:2016SLOVENSKI
STANDARDSIST EN 597-2:19951DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 597-2
December
t r s w ICS
s uä t t rä v râ
{ yä s v r Supersedes EN
w { yæ tã s { { vEnglish Version
Furniture æ Assessment of the ignitability of mattresses and upholstered bed bases æ Part
tã Ignition sourceã match flame equivalent Ameublement æ Évaluation de l 5allumabilité des matelas et des sommiers rembourrés æ Partie
tã Source d 5allumage ã flamme équivalente à celle d 5une allumette Möbel æ Bewertung der Entzündbarkeit von Matratzen und gepolsterten Bettböden æ Teil
tã Zündquelleã eine einem brennenden Streichholz vergleichbare Gasflamme This European Standard was approved by CEN on
y November
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
w { yæ tã t r s w ESIST EN 597-2:2016

Model test report form . 12
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...