SIST EN ISO 2162-1:1998

Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993)

Gives rules for the simplified representation of compression, extension, torsion, disc, spiral and leaf springs on technical drawings.

Technische Produktdokumentation - Federn - Teil 1: Vereinfachte Darstellung (ISO 2162-1:1993)

Dieser Teil der ISO 2162 legt Regeln für die vereinfachte Darstellung von Druckfedern, Zugfedern, Drehfedern, Tellerfedern, Spiralfedern und Blattfedern in technischen Zeichnungen fest.

Documentation technique de produits - Ressorts - Partie 1: Représentation simplifiée (ISO 2162-1:1993)

La présente partie de l'ISO 2162 établit les règles de représentation simplifiée des ressorts de compression, de traction, de torsion, des rondelles élastiques, des ressorts spiraux et à lames sur des dessins techniques.

Tehnična dokumentacija izdelkov - Vzmeti - 1. del: Poenostavljeno prikazovanje

General Information

• Status: Published
• Publication Date: 30-Apr-1998
• ICS: 01.110 - Technical product documentation
• ICS: 21.160 - Springs
• Technical Committee: TRS - Technical drawings, quantities, units, symbols and graphical symbols
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-1998
• Due Date: 01-May-1998
• Completion Date: 01-May-1998
• Ref Project: EN ISO 2162-1:1996 - Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2162-1:1998
01-maj-1998
7HKQLþQDGRNXPHQWDFLMDL]GHONRY9]PHWLGHO3RHQRVWDYOMHQRSULND]RYDQMH
Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-
1:1993)
Technische Produktdokumentation - Federn - Teil 1: Vereinfachte Darstellung (ISO 2162
-1:1993)
Documentation technique de produits - Ressorts - Partie 1: Représentation simplifiée
(ISO 2162-1:1993)
Ta slovenski standard je istoveten z: EN ISO 2162-1:1996
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
21.160 Vzmeti Springs
SIST EN ISO 2162-1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2162-1:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 2162-1:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 2162-1:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 2162-1:1998

---------------------- Page: 5 ----------------------

SIST EN ISO 2162-1:1998

---------------------- Page: 6 ----------------------

SIST EN ISO 2162-1:1998
INTERNATIONAL
STANDARD
21624
First edition
1993-12-01
Technical product documentation -
Springs -
Part 1:
Simplified representation
Documentation technique de produits - Ressorts -
Partie 7: Reprksen ta tion simplifiee
Reference number
ISO 2162-1:1993(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 2162-1:1998
ISO 2162=1:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 2162-1 was prepared by Technical Com-
mittee ISO/TC 10, Technical drawings, product definition and related
documentation, Su b-Committee SC 6, Mechanical engineering docu-
mentation.
This first edition of ISO 2162-1 cancels and replaces ISO 2162:1973, of
which it constitutes an extension and technical revision.
ISO 2162 consists of the following Parts, under the general title Tech-
nical product documen tation - Springs:
- Pafl 1: Simplified representation
- Part 2: Presentation of data for cylindrical helical compression
springs
- Part3: Vocabulary
Q ISO 1993
All rights reserved. No part of this publication may be reproduced or utilized in any form or by
any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 2162-1:1998
ISO 21624:1993(E)
INTERNATIONAL STANDARD
Technical product documentation -
Springs -
Part 1:
Simplified representation
- Other types of springs: by lines showing the
1 Scope
characteristics of the respective type of springs
This part of ISO 2162 gives rules for the simplified
and their elements.
representation of compression, extension, torsion,
The representations shown are examples only.
disc, spiral and leaf springs on technical drawings.
4 Helical compression springs
2 Normative references
The following requirements shall be applied for the
The following Standards contain provisions which,
indication of the geometrical characteristics of wire-
through reference in this text, constitute provisions
made springs on a simplified representation.
of this part of ISO 2162. At the time of publication,
the editions indicated were valid. All Standards are a) Cross-section of the material
subject to revision, and Parties to agreements based
Cylindrical: the appropriate graphical Symbol in
on this patt of ISO 2162 are encouraged to investi-
a
...