Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates

This European Standard specifies the conditioning procedures for samples of building products, and the rules for the selection of substrates for floor coverings and wall/ceiling surface products, when carrying out reaction to fire tests. This European Standard does not cover pre-drying procedures for prEN 1182:1998 or the washing and cleaning procedures relating to durability aspects, which are covered  by product standards.

Prüfungen zum Brandverhalten von Bauprodukten - Konditionierungsverfahren und allgemeine Regeln für die Auswahl von Trägerplatten

Anwendungsbereich
Diese Europäische Norm behandelt das Verfahren zur Konditionierung von Proben aus Bauprodukten
und gibt Regeln zur Auswahl von Trägerplatten für Bodenbeläge und Wand-/Deckenbekleidungen zur
Durchführung von Prüfungen zum Brandverhalten von Baustoffen.
Diese Norm behandelt keine Vortrocknungsverfahren für die Prüfung auf Nichtbrennbarkeit nach
prEN ISO 1182 sowie keine Wasch- und Reinigungsverfahren, die sich auf die Haltbarkeit beziehen und
daher in den jeweiligen Produktnormen behandelt werden.

Essais de réaction au feu des produits de construction - Mode opératoire du conditionnement et regles générales de sélection des substrats

La présente norme spécifie, pour les essais de réaction au feu, les modes opératoires de conditionnement des échantillons de produits de construction, et les regles de sélection des substrats pour les revetements de sol et les produits de surface pour murs et plafonds.
La présente norme ne traite pas des modes opératoires de préséchage pour le prEN ISO 1182, des modes opératoires de lavage et de séchage liés a la durabilité et qui sont donc traités dans la norme de produit.

Preskusi odziva gradbenih proizvodov na ogenj - Postopki kondicioniranja in splošna pravila za izbiro podlag

General Information

Status
Withdrawn
Publication Date
31-Jan-2002
Withdrawal Date
08-Apr-2010
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Apr-2010
Due Date
02-May-2010
Completion Date
09-Apr-2010

Relations

Buy Standard

Standard
EN 13238:2002
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi odziva gradbenih proizvodov na ogenj - Postopki kondicioniranja in splošna pravila za izbiro podlagPrüfungen zum Brandverhalten von Bauprodukten - Konditionierungsverfahren und allgemeine Regeln für die Auswahl von TrägerplattenEssais de réaction au feu des produits de construction - Mode opératoire du conditionnement et regles générales de sélection des substratsReaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 13238:2001SIST EN 13238:2002en01-februar-2002SIST EN 13238:2002SLOVENSKI
STANDARD



SIST EN 13238:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13238May 2001ICS 13.220.50; 91.100.01English versionReaction to fire tests for building products - Conditioningprocedures and general rules for selection of substratesEssais de réaction au feu des produits de construction -Mode opératoire du conditionnement et règles générales desélection des substratsPrüfungen zum Brandverhalten von Bauprodukten -Konditionierungsverfahren und allgemeine Regeln für dieAuswahl von TrägerplattenThis European Standard was approved by CEN on 7 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13238:2001 ESIST EN 13238:2002



Page 2EN 13238:2001CONTENTSPageForeword3Introduction41
Scope52
Normative references53
Terms and definitions54
Conditioning procedures65
General rules for selection of substrates7Bibliography9SIST EN 13238:2002



Page 3EN 13238:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 127 "Fire safety inbuildings", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by November 2001, and conflicting national standards shallbe withdrawn at the latest by December 2003.This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association, and supports essential requirements of EU Directive(s).According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13238:2002



Page 4EN 13238:2001IntroductionThe Construction Products Directive requires products to be tested in their end-use condition which,for the purpose of substrates, could lead to an economically unrealistic large variety of tests to becarried out. This large spectrum has been reduced to a practical number of standard substrates thatenables the majority of end-use conditions to be represented. Rules for the selection of suchsubstrates are given in this European Standard.This European Standard is intended for use in conjunction with CEN test methods covering reaction tofire tests for building products.As agreed by the CEN co-ordination group for fire (CEN/BT WG50), no irreversible preconditioningtreatments are covered in this European Standard. Such treatments are dealt with in the relevantproduct standards.The conditioning times given in this standard are based on current knowledge at the time of drafting.Any information resulting from experience in using the standard will be taken into account in anyfuture revision.SIST EN 13238:2002



Page 5EN 13238:20011
ScopeThis European Standard specifies the conditioning procedures for samples of building products, andthe rules for the selection of substrates for floor coverings and wall/ceiling surface products, whencarrying out reaction to fire tests.This European Standard does not cover pre-drying procedures for prEN ISO 1182 or the washing andcleaning procedures relating to durability aspects, which are covered by product standards.2
Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from otherpublications. These normative references are cited at appropriate places in the text, and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).EN 312-2,
Particleboards - Specifications - Requirements for general purpose boards for use in dryconditionsprEN 520,
Gypsum plasterboards - –Definitions, requirements and test methodsprEN ISO 1182,
Reaction to fire tests for building products - Non-combustibility test (ISO/DIS1182:1998)ISO 390,
Products in fibre-reinforced cement - Sampling and inspectionISO 1887,
Textile glass - Determination of combustible matter contentEN ISO 13943,
Fire safety - Vocabulary (ISO 13943:1999)prEN ISO 9239-1,
Reaction to fire tests for floorcoverings - Part 1: Determination of the burningbehaviour using a radiant heat source (ISO/DIS 9239-1:1998)3
Terms and definitionsFor the purpose of this European Standard, the terms and definitions given in EN ISO 13943, togetherwith the following, apply:3.1 assemblysee EN ISO 13943NOTE
The assembly
may include an air gap.3.2 materialsingle basic substance or uniformly dispersed mixture of substances e.g. metal, stone, timber,concrete, mineral wool with dispersed binder, polymers3.3productmaterial, element or component about which information is requiredSIST EN 13238:2002



Page 6EN 13238:20013.4substrateproduct which is used immediately beneath the product about which information is required. For aflooring, it is the floor on which the flooring is mounted or the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.