iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CEN ISO/TR 22411:2021

(Main)

Ergonomics data for use in the application of ISO/IEC Guide 71:2014 (ISO/TR 22411:2021)

Ergonomics data for use in the application of ISO/IEC Guide 71:2014 (ISO/TR 22411:2021)

This document provides ergonomics data for standard developers to use in applying
ISO/IEC Guide 71:2014 to address accessibility in standards. These data can also be used by ergonomists
and designers to support the development of more accessible products, systems, services, environments,
and facilities.
The ergonomics data include quantitative data and knowledge about basic human characteristics and
capabilities as well as context-specific and task-specific data, all being based on ergonomics research.
The data focused on the effects of ageing and/or consequences of various types of human sensory,
physical, and cognitive disabilities. It does not contain general ergonomics data that have no direct
relation to ageing or disabilities.
The data presented in this document are not exhaustive due to no available data for some aspects of
human characteristics and capabilities with regard to ageing and disabilities.

Ergonomische Daten und Leitlinien für die Anwendung des ISO/IEC Guide 71 für Produkte und Dienstleistungen zur Berücksichtigung der Belange älterer und behinderter Menschen (ISO/TR 22411:2021)

Données ergonomiques destinées à être utilisées dans le cadre de l'application du Guide ISO/IEC 71:2014 (ISO/TR 22411:2021)

Ergonomski podatki in smernice za uporabo ISO/IEC Vodila 71:2014 (ISO/TR 22411:2021)

General Information

Status
Published
Publication Date
15-Apr-2021
ICS
01.120 - Standardization. General rules
11.180.01 - Aids for disabled and handicapped persons in general
13.180 - Ergonomics
Technical Committee
VSN - Safety of machinery
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Jan-2021
Due Date
03-Apr-2021
Completion Date
16-Apr-2021
Ref Project
CEN ISO/TR 22411:2021 - Ergonomics data for use in the application of ISO/IEC Guide 71:2014 (ISO/TR 22411:2021)

Relations

Replaces
SIST-TP CEN ISO/TR 22411:2011 - Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008)
Effective Date
08-Jun-2022

Buy Standard

TP CEN ISO/TR 22411:2021 - BARVETP CEN ISO/TR 22411:2021 - BARVE
PreviousNext
Technical report
TP CEN ISO/TR 22411:2021 - BARVE
English language
248 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
TP CEN ISO/TR 22411:2021 - BARVETP CEN ISO/TR 22411:2021 - BARVE
PreviousNext
Technical report
TP CEN ISO/TR 22411:2021 - BARVE
English language
248 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 22411:2021
01-junij-2021
Nadomešča:
SIST-TP CEN ISO/TR 22411:2011
Ergonomski podatki in smernice za uporabo ISO/IEC Vodila 71 za proizvode in
storitve, ki upoštevajo potrebe starejših in invalidnih oseb (ISO/DTR 22411:2020)
Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and
services to address the needs of older persons and persons with disabilities (ISO/DTR
22411:2020)
Ergonomische Daten und Leitlinien für die Anwendung des ISO/IEC Guide 71 für
Produkte und Dienstleistungen zur Berücksichtigung der Belange älterer und behinderter
Menschen (ISO/DTR 22411:2020)
Données d'ergonomie et lignes directrices pour l'application du Guide ISO/IEC 71 aux
produits et services afin de répondre aux besoins des personnes âgées et de celles
ayant des incapacités (ISO/DTR 22411:2020)
Ta slovenski standard je istoveten z: CEN ISO/TR 22411:2021
ICS:
01.120 Standardizacija. Splošna Standardization. General
pravila rules
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
13.180 Ergonomija Ergonomics
SIST-TP CEN ISO/TR 22411:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN ISO/TR 22411:2021

---------------------- Page: 2 ----------------------
SIST-TP CEN ISO/TR 22411:2021


CEN ISO/TR 22411
TECHNICAL REPORT

RAPPORT TECHNIQUE

January 2021
TECHNISCHER BERICHT
ICS 01.120; 11.180.01 Supersedes CEN ISO/TR 22411:2011
English Version

Ergonomics data for use in the application of ISO/IEC
Guide 71:2014 (ISO/TR 22411:2021)
Données ergonomiques destinées à être utilisées dans Ergonomische Daten und Leitlinien für die Anwendung
le cadre de l'application du Guide ISO/IEC 71:2014 des ISO/IEC Guide 71 für Produkte und
(ISO/TR 22411:2021) Dienstleistungen zur Berücksichtigung der Belange
älterer und behinderter Menschen (ISO/TR
22411:2021)


This Technical Report was approved by CEN on 26 December 2020. It has been drawn up by the Technical Committee CEN/TC
122.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 22411:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN ISO/TR 22411:2021
CEN ISO/TR 22411:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST-TP CEN ISO/TR 22411:2021
CEN ISO/TR 22411:2021 (E)
European foreword
This document (CEN ISO/TR 22411:2021) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of
which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TR 22411:2011.
Endorsement notice
The text of ISO/TR 22411:2021 has been approved by CEN as CEN ISO/TR 22411:2021 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST-TP CEN ISO/TR 22411:2021

---------------------- Page: 6 ----------------------
SIST-TP CEN ISO/TR 22411:2021
TECHNICAL ISO/TR
REPORT 22411
Second edition
2021-01
Ergonomics data for use in the
application of ISO/IEC Guide 71:2014
Données ergonomiques destinées à être utilisées dans le cadre de
l'application du Guide ISO/IEC 71:2014
Reference number
ISO/TR 22411:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST-TP CEN ISO/TR 22411:2021
ISO/TR 22411:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the co
...

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 22411:2021
01-junij-2021
Nadomešča:
SIST-TP CEN ISO/TR 22411:2011
Ergonomski podatki in smernice za uporabo ISO/IEC Vodila 71:2014 (ISO/TR
22411:2021)
Ergonomics data for use in the application of ISO/IEC Guide 71:2014 (ISO/TR
22411:2021)
Ergonomische Daten und Leitlinien für die Anwendung des ISO/IEC Guide 71 für
Produkte und Dienstleistungen zur Berücksichtigung der Belange älterer und behinderter
Menschen (ISO/TR 22411:2021)
Données ergonomiques destinées à être utilisées dans le cadre de l'application du
Guide ISO/IEC 71:2014 (ISO/TR 22411:2021)
Ta slovenski standard je istoveten z: CEN ISO/TR 22411:2021
ICS:
01.120 Standardizacija. Splošna Standardization. General
pravila rules
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
13.180 Ergonomija Ergonomics
SIST-TP CEN ISO/TR 22411:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN ISO/TR 22411:2021

---------------------- Page: 2 ----------------------
SIST-TP CEN ISO/TR 22411:2021


CEN ISO/TR 22411
TECHNICAL REPORT

RAPPORT TECHNIQUE

January 2021
TECHNISCHER BERICHT
ICS 01.120; 11.180.01 Supersedes CEN ISO/TR 22411:2011
English Version

Ergonomics data for use in the application of ISO/IEC
Guide 71:2014 (ISO/TR 22411:2021)
Données ergonomiques destinées à être utilisées dans Ergonomische Daten und Leitlinien für die Anwendung
le cadre de l'application du Guide ISO/IEC 71:2014 des ISO/IEC Guide 71 für Produkte und
(ISO/TR 22411:2021) Dienstleistungen zur Berücksichtigung der Belange
älterer und behinderter Menschen (ISO/TR
22411:2021)


This Technical Report was approved by CEN on 26 December 2020. It has been drawn up by the Technical Committee CEN/TC
122.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 22411:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN ISO/TR 22411:2021
CEN ISO/TR 22411:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST-TP CEN ISO/TR 22411:2021
CEN ISO/TR 22411:2021 (E)
European foreword
This document (CEN ISO/TR 22411:2021) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of
which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TR 22411:2011.
Endorsement notice
The text of ISO/TR 22411:2021 has been approved by CEN as CEN ISO/TR 22411:2021 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST-TP CEN ISO/TR 22411:2021

---------------------- Page: 6 ----------------------
SIST-TP CEN ISO/TR 22411:2021
TECHNICAL ISO/TR
REPORT 22411
Second edition
2021-01
Ergonomics data for use in the
application of ISO/IEC Guide 71:2014
Données ergonomiques destinées à être utilisées dans le cadre de
l'application du Guide ISO/IEC 71:2014
Reference number
ISO/TR 22411:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST-TP CEN ISO/TR 22411:2021
ISO/TR 22411:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 22007-4:2024(Main)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO 22007-4:2024)
EN ISO 22007-4:2024

ISO 22007-4:2017 specifies a method for the determination of the thermal diffusivity of a thin solid disc of plastics in the thickness direction by the laser flash method. This method is based upon the measurement of the temperature rise at the rear face of the thin-disc specimen produced by a short energy pulse on the front face.
The method can be used for homogeneous solid plastics as well as composites having an isotropic or orthotropic structure. In general, it covers materials having a thermal diffusivity, α, in the range 1 × 10−7 m2⋅s−1 < α < 1 × 10−4 m2⋅s−1. Measurements can be carried out in gaseous and vacuum environments over a temperature range from −100 °C to +400 °C.
NOTE For inhomogeneous specimens, the measured values can be specimen thickness dependent.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 24394:2024(Main)
Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components
ISO 24394:2023

This document specifies requirements for the qualification of welders and welding operators for fusion welding of metallic materials for aerospace applications.
NOTE Success in the test is an essential precondition for the qualification of welders and welding operators in new production and repair work in aerospace. However, welding equipment operators do not need to be qualified according to this document.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    34 pages
    English language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off
  • Draft
    35 pages
    French language
    sale 15% off
SIST
SIST EN ISO 3882:2024(Main)
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2024)
EN ISO 3882:2024

This document reviews methods for measuring the thickness of metallic and other inorganic coatings on both metallic and non-metallic substrates (see Tables 1, A.1 and A.2). It is limited to tests already specified, or to be specified, in International Standards and excludes certain tests that are used for special applications.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19901-3:2024(Main)
Oil and gas industries including lower carbon energy - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2024)
EN ISO 19901-3:2024

This document provides requirements, guidance and information for the design and fabrication of topsides structure for offshore structures, including in-service, pre-service and post-service conditions.
The actions on topsides structure and the action effects in structural components are derived from this document, where necessary in combination with other International Standards in the ISO 19901 series (e.g. ISO 19901-1 for wind actions - see 7.6.2, ISO 19901-2 for seismic actions - see 7.7) and ISO 19902 for fatigue design (see 6.7).
This document is applicable to the following:
—     topsides of fixed offshore structures;
—     discrete structural units placed on the hull structures of floating offshore structures and mobile offshore units;
—     topsides of arctic offshore structures, excluding winterization (see ISO 19906).
If any part of the topsides structure forms part of the primary structure of the overall structural system which resists global platform actions, the requirements of this document are supplemented with applicable requirements in ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1, ISO 19905-3 and ISO 19906.
For those parts of floating offshore structures and mobile offshore units that are chosen to be governed by the rules of a recognized classification society, the corresponding class rules supersede the associated requirements of this document.
This document also addresses prevention, control and assessment of fire, explosions and other accidental events.
The fire and explosion provisions of this document can be applied to those parts of the hulls of floating structures and mobile offshore units that contain hydrocarbon processing, piping or storage.
NOTE          Requirements for structural integrity management are presented in ISO 19901-9.
This document applies to structural components including the following:
—     primary and secondary structure in decks, module support frames and modules;
—     flare structures;
—     crane pedestal and other crane support arrangements;
—     helicopter landing decks (helidecks);
—     permanent bridges between separate offshore structures;
—     masts, towers and booms on offshore structures.
This document provides requirements for selecting and using a national building standard with a correspondence factor for determining the resistance of rolled and welded non-circular prismatic components and their connections.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    155 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60938-2-1:2024(Main)
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D (IEC 60938-2-1:2023)
EN IEC 60938-2-1:2024

IEC 60938-2-1:2023 is applicable to the drafting of detail specifications for fixed inductors for which safety tests are required for use in electronic equipment.
A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements shall not be considered as being in accordance with IEC specifications nor shall they so be described.
This edition includes the following significant technical changes with respect to the previous edition:
a) it combines IEC 60938-2-1:1999 and IEC 60938-2-2:1999 into one Blank detail specification (BDS);
b) test schedule for quality conformance inspection is moved to an informative annex (Annex B).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62561-5:2024(Main)
Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals (IEC 62561-5:2023)
EN IEC 62561-5:2024

IEC 62561-5:2023 is available as IEC 62561-5:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 62561-5:2023 specifies the requirements and tests for earth electrode inspection housings (earth housings) installed in the earth and for earth electrode seals. Lightning protection system components (LPSC) can also be suitable for use in hazardous atmospheres. For this reason, there are additional requirements when installing the components under such conditions. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) A classification of earth electrode seals has been added.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62056-6-1:2024(Main)
Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2023)
EN IEC 62056-6-1:2024

This part of IEC 62056 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes.
OBIS provides a unique identifier for all data within the metering equipment, including not only measurement values, but also abstract values used for configuration or obtaining information about the behaviour of the metering equipment. The ID codes defined in this document are used for the identification of:
- logical names of the various instances of the ICs, or objects, as defined in IEC 62056-6-2:2021;
- data transmitted through communication lines;
- data displayed on the metering equipment, see Clause A.2.
This document applies to all types of metering equipment, such as fully integrated meters, modular meters, tariff attachments, data concentrators, etc.
To cover metering equipment measuring energy types other than electricity, combined metering equipment measuring more than one type of energy or metering equipment with several physical measurement channels, the concepts of medium and channels are introduced. This allows meter data originating from different sources to be identified. While this document fully defines the structure of the identification system for other media, the mapping of non-electrical energy related data items to ID codes is completed separately.
NOTE EN 13757-1:2014 defines identifiers for metering equipment other than electricity: heat cost allocators, thermal energy, gas, cold water and hot water.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 629.3 S1:2024(Main)
Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 3: Transition joints between cables with impregnated paper insulation and cables with extruded insulation
HD 629.3 S1:2024

This standard specifies performance requirements for type tests for transition joints for use between extruded insulated power cables as specified in HD 620 and impregnated paper insulated power cables as specified in HD 621 or other relevant standard.
Once type test for an accessory is successfully completed, it is not necessary to repeat the test, unless changes are made in the materials, design or manufacturing process, which might affect the performance characteristics.
Possible thermo-mechanical forces due to high current loads from for example renewable sources of power generation are not covered by these tests. Possible extra thermo-mechanical forces due to high current loads from renewable sources of power generation are not covered by these tests (under consideration).
Accessories for special applications such as submarine cables, ships cables or hazardous situations (explosive environments, fire resistant cables or seismic conditions) are not included.
Test methods are included in EN 61442:2005 and Annex E.

  • Standardization document
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62386-306:2024(Main)
Digital addressable lighting interface - Part 306: Particular requirements - Input devices - General purpose sensor (IEC 62386-306:2023)
EN IEC 62386-306:2024

IEC 62386-306:2023 is applicable to input devices that provide sensor information or measurements to the lighting control system.
This document is only applicable to input devices complying with IEC 62386-103.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-V CEN/CLC Guide 10:2024(Main)
Policy on the distribution, sale and copyright of CEN and CENELEC Content
CEN/CLC Guide 10:2024
  • Guide
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day