kSIST FprEN ISO 1043-4:2021

Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO/FDIS 1043-4:2021)

Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 4: Flammschutzmittel (ISO/FDIS 1043-4:2021)

Dieser Teil von ISO 1043 stellt einheitliche Kurzzeichen für Flammschutzmittel, die in Kunststoffen eingesetzt werden, zur Verfügung. Die Kurzzeichen setzen sich aus der Bezeichnung FR und einer oder mehreren nachfolgenden Codenummern zusammen, die in Abschnitt 5 gegeben sind. Sie werden zusätzlich zur Kennzeichnung von Kunststoffmaterialien sowie Kunststoffprodukten benutzt.

Plastiques - Symboles et termes abrégés - Partie 4: Ignifuges (ISO/FDIS 1043-4:2021)

Polimerni materiali - Simboli in kratice - 4. del: Zaviralci gorenja (ISO/FDIS 1043-4:2021)

General Information

• Status: Not Published
• Public Enquiry End Date: 25-Oct-2020
• ICS: 01.075 - Character symbols
• ICS: 83.040.30 - Auxiliary materials and additives for plastics
• ICS: 83.080.01 - Plastics in general
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 06-May-2021
• Due Date: 24-Jun-2021
• Completion Date: 06-May-2021
• Ref Project: FprEN ISO 1043-4 - Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO/FDIS 1043-4:2021)

RELATIONS

• Revised: SIST EN ISO 1043-4:2000 - Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998)
• Effective Date: 15-Jan-2020
• Revised: SIST EN ISO 1043-4:2000/A1:2016 - Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
• Effective Date: 15-Jan-2020

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 1043-4:2020
01-oktober-2020

Polimerni materiali - Simboli in kratice - 4. del: Zaviralci gorenja (ISO/DIS 1043-

4:2020)

Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO/DIS 1043-

4:2020)

Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 4: Flammschutzmittel (ISO/DIS

1043-4:2020)

Plastiques - Symboles et termes abrégés - Partie 4: Ignifuges (ISO/DIS 1043-4:2020)

Ta slovenski standard je istoveten z: prEN ISO 1043-4
ICS:
01.075 Simboli za znake Character symbols
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 1043-4:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 1043-4:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 1043-4:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1043-4
ISO/TC 61/SC 1 Secretariat: BSI
Voting begins on: Voting terminates on:
2020-08-03 2020-10-26
Plastics — Symbols and abbreviated terms —
Part 4:
Flame retardants
Plastiques — Symboles et abréviations —
Partie 4: Ignifuges
ICS: 83.080.01; 83.040.30
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 1043-4:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 1043-4:2020
ISO/DIS 1043-4:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 1043-4:2020
ISO/DIS 1043-4:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and Definition ....................................................................................................................................................................................... 1

4 Application of symbols ................................................................................................................................................................................... 1

5 Code numbers for flame retardants ................................................................................................................................................. 2

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 1043-4:2020
ISO/DIS 1043-4:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

...