SIST HD 532 S1:1996

Hard-drawn aluminium wire for overhead line conductors

Applies to hand-drawn aluminium wires for the manufacture of stranded conductors for overhead power transmission purposes. Specifies the mechanical and electrical properties of wires in the diameter rank 1.25 mm to 5.00 mm. This publication supersedes IEC 60111 (1983).

Hartgezogene Aluminiumdrähte für Freileitungsseile

Fil d'aluminium écroui dur pour conducteurs de lignes aériennes

S'applique aux fils en aluminium écroui dur pour la fabrication de conducteurs câblés pour lignes aériennes de transport d'énergie électrique. Spécifie les propriétés mécaniques et électriques des fils dans la gamme de diamètres de 1,25 mm à 5,00 mm.
Cette publication remplace la CEI 60111 (1983).

Hard drawn aluminium wire for overhead line conductors

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1995
• Withdrawal Date: 31-Aug-2002
• ICS: 29.060.10 - Wires
• ICS: 29.240.20 - Power transmission and distribution lines
• Technical Committee: GAV - Bare aluminium conductors
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Ref Project: HD 532 S1:1989 - Hard-drawn aluminium wire for overhead line conductors

Relations

• Replaced By: SIST EN 60889:2002 - Hard-drawn aluminium wire for overhead line conductors
• Effective Date: 06-May-2014
• Replaced By: SIST EN 60889:2002 - Hard-drawn aluminium wire for overhead line conductors
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 532 S1:1996
01-januar-1996
Hard drawn aluminium wire for overhead line conductors
Hard-drawn aluminium wire for overhead line conductors
Hartgezogene Aluminiumdrähte für Freileitungsseile
Fil d'aluminium écroui dur pour conducteurs de lignes aériennes
Ta slovenski standard je istoveten z: HD 532 S1:1989
ICS:
29.060.10 Žice Wires
29.240.20 Daljnovodi Power transmission and
distribution lines
SIST HD 532 S1:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 532 S1:1996

---------------------- Page: 2 ----------------------

SIST HD 532 S1:1996

---------------------- Page: 3 ----------------------

SIST HD 532 S1:1996

---------------------- Page: 4 ----------------------

SIST HD 532 S1:1996


INTERNATIONAL IEC


STANDARD 60889





First edition
1987


Hard-drawn aluminium wire for overhead line
condutors

 IEC 1987 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
E
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST HD 532 S1:1996
889 ©IEC 1987 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
HARD-DRAWN ALUMINIUM WIRE FOR OVERHEAD LINE
CONDUCTORS
FOREWORD
1)
The formal decisions or agreements of the I E C on technical matters, prepared by Technical Committees on which all the
National Committees having a special interest therein are represented, express, as nearly
as possible, an international consensus
of opinion on the subjects dealt with.
2)
They have the form of recommendations for inte rn
ational use and they are accepted by the National Committees in that
sense.
3)
In order to promote international unification, the I E C expresses the wish that all National Committees should adopt the text of
the I E C recommendation for their national rules in so far as national conditions will permit. Any divergence between the I E C
recommendation and the corresponding national rules should, as far as possible, be clearly indicated in the latter.
PREFACE
This standard has been prepared by I E C Technical Committee No. 7: Bare Aluminium Conduc-
tors.
This standard replaces Clauses 3, 5, 6 and 13, Sub-clause 12.2 and the requirements of Clause 4,
Sub-clauses 8.1, 12.1 and Item c) of Appendix A of I E C Publication 207 (1966): Aluminium Stranded
Conductors. It also replaces Clauses 3, 6 and 15, Sub-clause 7.1 and Item
i)
of Sub-clause 13.4 and the
requirements of Clause 5, Sub-clauses 9.1, 13.2 and Item c) of Appendix A of I E C Publication 209
(1966): Aluminium Conductors, Steel-reinforced.
The text of this standard is based on the following documents:
Six Months' Rule
Report on Voting
7(CO)422
7(CO)425
Further information can be found in the Repo
rt on Voting indicated in the table above.
The following I E C Publication is quoted in this standard:
Publication No. 468 (1974): Method of Measurement of Resistivity of Metallic Materials.
Other publications quoted:
ISO Standard 6892 (1984): Metallic Materials — Tensile Testing.
ISO Stan
dard 7802 (1983): Metallic Materials — Wire — Wrapping Test.

---------------------- Page: 6 ----------------------

SIST HD 532 S1:1996
– 5 –
889 ©IEC 1987
WIRE FOR OVERHEAD LINE
HARD-DRAWN ALUMINIUM
CONDUCTORS
1. Scope
This standard is applicable to hard-drawn aluminium wires for the manufacture of stranded
conductors for overhead power transmission purposes. It specifies the mechanical and electrical
properties of wires in the diameter range 1.25 mm to 5.00 mm.
2. Values for hard-drawn aluminiu
...