SIST EN 302 064-2 V1.1.1:2004

• Abstract:

  Wireless video links for professional and semi-professional use.

• Status: Published
• Publication Date: 30-Sep-2004
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 33.160.40 - Video systems
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2004
• Due Date: 01-Oct-2004
• Completion Date: 01-Oct-2004
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
  OJ Ref: DATUM UMIKA 15.11.2026 Conflicting Date: 15-Nov-2026
• Directive:

  ---

  TRRTP124 - Splošni akt o načrtu uporabe radijskih frekvenc (NURF-4)
• Mandate: M/284
• Ref Project: ETSI EN 302 064-2 V1.1.1 (2004-04) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

Overview

SIST EN 302 064-2 V1.1.1:2004 is a Slovenian standard developed by SIST, equivalent to ETSI EN 302 064-2, that addresses electromagnetic compatibility (EMC) and radio spectrum matters (ERM) for wireless video links (WVL) operating in the 1.3 GHz to 50 GHz frequency band. This document serves as a harmonized European Norm (EN) under Article 3.2 of the R&TTE Directive 1999/5/EC, supporting the efficient and interference-free use of the radio spectrum for wireless video communication, especially for professional and semi-professional applications.

The standard outlines the minimum technical requirements necessary for wireless video link equipment to ensure optimal spectrum usage and minimize the potential for harmful interference.

Key Topics

• Scope and User Categories

  • Covers terrestrial wireless digital video link equipment above 1.3 GHz.
  • Applicable to a wide range of users: broadcasters, professional businesses, industrial users, emergency services, and consumers.
  • Defines preferred channel bandwidths for various equipment categories.

• Technical Requirements

  • Focuses on transmitter and receiver characteristics relevant to spectrum efficiency and electromagnetic compatibility.
  • Establishes requirements for output power, channel bandwidth, and spurious emissions.
  • Stipulates mandatory conformance testing methods and measurement uncertainty limits.

• Harmonization under R&TTE Directive

  • Ensures equipment meets essential requirements for radio equipment as defined under Article 3.2.
  • Facilitates mutual recognition of conformity across the European Community for wireless video link products.

• Testing and Compliance

  • Specifies environmental conditions and procedures for type testing of equipment.
  • Includes detailed guidance on test methods and interpretation of measurement results.
  • Requires that only non-user-accessible controls should impact interferential potential, enhancing operational safety.

Applications

Wireless video link equipment conforming to SIST EN 302 064-2 V1.1.1:2004 is intended for a range of professional and semi-professional video transmission applications, including:

• Broadcasting and Programme Making

  • Real-time, high-quality video transmission with low latency for live events.
  • Contribution links between cameras, outside broadcast units, and studios.

• Professional and Business Uses

  • Secure and reliable digital video links for corporate, educational, and government environments.

• Industrial and Emergency Services

  • Deployment in utility industries, transportation, civil emergency response, and industrial surveillance.
  • Use in situations requiring robust, high-quality digital video links within licensed or allocated frequency bands.

• Consumer, Hobbyist, and Amateur Applications

  • Indoor visual communication systems where spectrum management is crucial for interference mitigation.

This scope ensures that equipment is compatible with regulatory requirements and offers reliable performance across diverse operational environments.

Related Standards

Wireless video links and associated equipment must also comply with related standards and directives, including:

• EN 302 064-1:
  Technical characteristics and methods of measurement for wireless video links.

• EN 301 489:
  EMC standard for radio equipment and services, ensuring electromagnetic compatibility across devices.

• Directive 1999/5/EC (R&TTE Directive):
  Overarching EU directive for radio equipment and telecommunications terminal equipment.

• Directive 89/336/EEC (EMC Directive):
  Addresses general electromagnetic compatibility requirements.

• Directive 73/23/EEC (LV Directive):
  Governs safety aspects related to electrical equipment.

Referencing and conforming to these standards is essential for equipment to be marketed, installed, and used within the European market, ensuring interoperability and safety.

---

Keywords: wireless video links, electromagnetic compatibility, radio spectrum, R&TTE Directive, EN 302 064-2, professional video systems, channel bandwidth, spurious emissions, conformity testing, EMC, ERM, SIST standard, spectrum efficiency.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive33.160.40Video sistemiVideo systems33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in generalICS:Ta slovenski standard je istoveten z:EN 302 064-2 Version 1.1.1SIST EN 302 064-2 V1.1.1:2004en01-oktober-2004SIST EN 302 064-2 V1.1.1:2004SLOVENSKI
STANDARD
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 2
Reference DEN/ERM-TG17-001-2 Keywords radio, regulation, SHF, SRD, UHF, video ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 302 064-2 V1.1.1:2004

ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 3
Contents Intellectual Property Rights.4 Foreword.4 Introduction.5 1 Scope.7 2 References.8 3 Definitions, symbols and abbreviations.8 3.1 Definitions.8 3.2 Symbols.8 3.3 Abbreviations.8 4 Technical requirements specifications.9 4.1 Environmental profile.9 4.2 Transmitter requirements.9 4.2.1 Rated output power.9 4.2.1.1 Definition.9 4.2.1.2 Limit.9 4.2.1.3 Conformance.9 4.2.2 Channel bandwidth.9 4.2.2.1 Definition.9 4.2.2.2 Limit.9 4.2.2.3 Conformance.9 4.2.3 Spurious emissions.9 4.2.3.1 Definition.9 4.2.3.2 Limit.9 4.2.3.3 Conformance.9 4.3 Receiver requirements.10 4.3.1 Spurious emissions.10 4.3.1.1 Definition.10 4.3.1.2 Limit.10 4.3.1.3 Conformance.10 5 Testing for compliance with technical requirements.10 5.1 Environmental conditions for testing.10 5.2 Interpretation of the measurement results.10 5.3 Essential radio test suites.11 5.3.1 Transmitter test suites.11 5.3.1.1 Rated output power.11 5.3.1.2 Channel bandwidth.11 5.3.1.3 Spurious emissions.11 5.3.2 Receiver test suites.11 5.3.2.1 Spurious emissions.11 Annex A (normative): The EN Requirements Table (EN-RT).12 Annex B (informative): Bibliography.13 Annex C (informative): The EN title in the official languages.14 History.15
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 4
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [3] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive") [1]. Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A. The present document is part 2 of a multipart deliverable covering the technical characteristics and methods for Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band, as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 2 April 2004 Date of latest announcement of this EN (doa): 31 July 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2005 Date of withdrawal of any conflicting National Standard (dow): 31 January 2006
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 5
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1.
Use of spectrum * If needed Scoped by
equipment
class or type Scoped by frequency and/or equipment type Disability* Privacy* Fraud* No harm to the network* Emergency* Inter-working via
the network* Inter-working with the network Non-radio Radio (RE) Non-TTE TTE 3.1b 3.2 3.3c 3.3b 3.3a 3.3d 3.3e 3.3f Radio Product EMC Generic and product standards also notified under EMC Directive Standards also notified under LV Directive 3.1a New radio harmonized standards Spectrum EMC Safety - If needed, new standards for human exposure to Electromagnetic Fields, - if needed, new standards for acoustic safety EN 301 489 multi-part EMC standard
Figure 1: Modular structure for the various standards used under the R&TTE Directive SIST EN 302 064-2 V1.1.1:2004

ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 6
The left hand edge of the figure 1 shows the different clauses of article 3 of the R&TTE Directive [1]. For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present document essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified by function or interface type. The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The scopes of these standards are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment type. For article 3.1b the diagram shows EN 301 489, the multi-part product EMC standard for radio used under the EMC Directive. For article 3.1a the diagram shows the existing safety standards currently used under the LV Directive and new standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be required. The bottom of the figure shows the relationship of the standards to radio equipment and telecommunications terminal equipme
...