Source for standards, engineering specifications, manuals and technical publications

This document specifies a process for a medical laboratory to identify and manage the risks to patients, laboratory workers and service providers that are associated with medical laboratory examinations. The process includes identifying, estimating, evaluating, controlling and monitoring the risks.
The requirements of this document are applicable to all aspects of the examinations and services of a medical laboratory, including the pre-examination, examination, and post-examination aspects including accurate transmission of examination results into the electronic medical record, as well as other technical and management processes described in ISO 15189.
This document does not specify acceptable levels of risk.
This document does not apply to risks from post-examination clinical decisions made by healthcare providers.
This document complements the management of risks affecting medical laboratory enterprises that are addressed by ISO 31000, such as business, economic, legal, and regulatory risks.

This standard provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including:
support of each claimed BACnet service, either as an initiator, executor, or both,
support of each claimed BACnet object-type, including both required properties and each claimed optional property,
(support of the BACnet network layer protocol,
support of each claimed data link option, and
support of all claimed special functionality.

This document specifies requirements for four types of wire braid reinforced hoses and hose assemblies of nominal bore from 5 to 76: Types 1SN, 2SN, 1ST and 2ST. They are suitable for use with:
—   hydraulic fluids in accordance with ISO 6743 4 with the exception of all flame retardant HFD fluids at temperatures ranging from −40 °C to +100 °C;
—   water based fluids at temperatures ranging from −40 °C to +70 °C;
—   water at temperatures ranging from 0 °C to +70 °C.
The hoses are not suitable for use with castor oil based and ester-based fluids.
This document does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE   Requirements for hydraulic hoses for underground mining are covered in other documents.

This document specifies requirements for either rubber or plastics or both covered conveyor belting of textile construction for general surface use on flat or troughed idlers.
This document is not applicable to light conveyor belts as described in ISO 21183-1.

This document specifies requirements for three types of textile reinforced rubber hoses and hose assemblies of nominal bore from 5 to 100. The types are defined in Clause 4.
They are suitable for use with:
—   hydraulic fluids in accordance with ISO 6743 4 with the exception of all flame retardant HFD fluids at temperatures ranging from −40 °C to 100 °C;
—   water-based fluids at temperatures ranging from −40 °C to +70 °C;
—   water at temperature ranging from 0 °C to +70 °C.
The hoses are not suitable for use with castor oil based and ester-based fluids.
The document does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE   Requirements for hydraulic hoses for underground mining are covered in other documents.

This document specifies the requirements relating to:
Steel GX5CrNiCuNb16-4 (1.4525)
Homogenized
Solution treated and precipitation hardened
Investment casting
De ≤ 50 mm
Rm ≥ 900 MPa
for aerospace applications.
ASD-STAN designation FE-CM3801
Material number 1.4525

This document specifies the calibration and adjustment of the metrological characteristics of contact (stylus) instruments for the measurement of surface texture by the profile method as defined in ISO 25178-601. The calibration and adjustment specified within this document is intended to be carried out with the aid of measurement standards. NOTE Annex B specifies the calibration and adjustment of metrological characteristics of simplified operator contact (stylus) instruments which do not conform with ISO 25178-601.

This document specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics. The test is normally carried out on dry specimens conditioned in the specified atmosphere. The test is applicable to most types of geosynthetic products, but does not apply to products with apertures greater than 10 mm.

This document specifies the requirements and provides guidance for establishing, implementing, maintaining and continually improving an AI (artificial intelligence) management system within the context of an organization.
This document is intended for use by an organization providing or using products or services that utilize AI systems. This document is intended to help the organization develop, provide or use AI systems responsibly in pursuing its objectives and meet applicable requirements, obligations related to interested parties and expectations from them.
This document is applicable to any organization, regardless of size, type and nature, that provides or uses products or services that utilize AI systems.

This document specifies a method to evaluate, by means of impactors described in ISO 29584:2015, safe breakage characteristics of vacuum insulating glass (VIG) products intended to reduce cutting and piercing injuries to persons through accidental impact. This document does not specify the intended use of the products, but provides a method of classification in terms of the performance of the products being tested. The impact energy used for the various levels of classification are designed to provide the intended user or the legislator with the information to assist in defining the level of safety and protection required relative to the intended location at which the selected safety glass is to be used. The products to which this document is applicable are: VIG without further processing (Group 2); VIG processed into a laminated glass (Group 1); VIG backed with an adhesive (safety) film (Group 1). Insulating glass units incorporating VIG are excluded from this document.

This document specifies requirements for four types of rubber-covered spiral wire reinforced hydraulic hoses and hose assemblies of nominal bore from 6 to 51: Types 4SP, 4SH, R13 and R15. They are suitable for use with:
—   hydraulic fluids covered in ISO 6743 4 with the exception of all flame retardant HFD fluids at temperatures ranging from −40 °C to +100 °C for types 4SP and 4SH and −40 °C to +120 °C for types R13 and R15;
—   water-based fluids at temperatures ranging from −40 °C to 70 °C;
—   water fluids at temperatures ranging from 0 °C to 70 °C.
The hoses are not suitable for use with castor oil based nor ester-based fluids.
This document does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE   Requirements for hydraulic hoses for underground mining are covered in a different document.

This document specifies requirements and provides recommendations for repetitive work tasks involving repetitive movements and exertions of the upper extremity. It provides guidance on the identification and assessment of risk factors commonly associated with repetitive movements and exertions of the upper limbs, thereby allowing evaluation of the related health risks to the working population. The recommendations apply to the adult working population and are intended to give reasonable protection for nearly all healthy adults. This document does not address the manual handling of objects while using lift-assistive devices such as exoskeletons and does not address the needs of pregnant women or persons with disabilities.

This document specifies procedures for periodic inspection and testing, for transportable refillable LPG cylinders with a water capacity from 0,5 l up to and including 150 l.
This document is applicable to the following:
-   welded steel LPG cylinders manufactured to an alternative design and construction, according to EN 14140 or equivalent standard;
-   welded aluminium LPG cylinders, according to EN 13110 or equivalent standard;
-   composite LPG cylinders, according to EN 14427 or equivalent standard;
-   over-moulded LPG cylinders designed and manufactured according to EN 1442 or EN 14140;
see Annexes E and F.
This document can also be applied to stainless steel LPG cylinders designed according to national codes, see Clause A.3. This document can also be applied to composite LPG cylinders designed according to EN 12245, ISO 11119-3 and ISO 11119-4.
This document does not apply to cylinders permanently installed in vehicles.

This document specifies requirements for two types of wire braid reinforced compact hoses and hose assemblies of nominal bore from 6 to 76, types 1SC and 2SC.
They are suitable for use with:
—   hydraulic fluids in accordance with ISO 6743 4 with the exception with the exception of all flame retardant HFD fluids at temperatures ranging from −40 °C to +100 °C;
—   water-based fluids at temperatures ranging from −40 °C to +70 °C;
—   water at temperatures ranging from 0 °C to +70 °C.
The hoses are not suitable for use with castor oil based nor phosphoric ester-based fluids.
This document does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.
NOTE   Requirements for hydraulic hoses for underground mining are covered in other documents.

This document gives guidelines for the assessment of thermal stress inside vehicles used for land, sea and air operation. It offers information about the assessment of hot, cold as well as moderate thermal environments by referring to different methods and specifying the constraints and necessary adjustments for the special case of vehicle climate assessment.

This document specifies a method for the determination of selected polybrominated diphenylethers (PBDE) (see Figure 1 and Table 1) in sediment, suspended particulate matter and biota using gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) or with high resolution mass spectrometry (GC-HRMS) in the electron impact (EI), negative ion chemical ionization (NCI) or atmospheric pressure ionization (APCI) mode. The method is applicable to sediment and suspended particulate matter samples with limits of quantification of 0,2 µg/kg dry mass (dm) for brominated diphenylether (BDE) BDE-28 to BDE-183, of 2 µg/kg dry mass (dm) for BDE‑209. The method is applicable as well with lower limits of quantification (LOQ), if specific clean-up methods, described in Clause 10, Table 3, method 1 and method 2 in combination with measurement methods GC-MS/MS or GC-HRMS after electron impact ionization (El) or negative ion chemical ionization (NCI) for BDE-209 are used. Depending on the analytical capability of the instrument, limits of quantification down to 0,003 µg/kg dm for BDE-28 to BDE-154 and 0,02 µg/kg dm for BDE-183 and 1 µg/kg dm for BDE-209 and lower are possible. The method is applicable to biota samples with limits of quantification down to 0,000 2 µg/kg fresh mass (fm) (BDE-28 to BDE-154) and 0,03 μg/kg fresh mass (fm) (BDE-183), if specific clean-up methods, described in Table 4 in combination with measurement methods GC-MS/MS or GC-HRMS after electron impact ionization (El) are used. Performance data are listed in Annex E.

This document specifies the characteristics of hexalobular socket set screws with metric coarse pitch threads M3 to M30 for steel and M3 to M24 for stainless steel and with product grade A. Set screws are not intended for use under tensile load. If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

This document specifies the requirements for seal-less rotodynamic pumps that are driven with permanent magnet coupling (magnet drive pumps) or with canned motor, and which are mainly used in chemical processes, water treatment and petrochemical industries. Their use can be dictated by space, noise, environment or safety regulations. Seal-less pumps are pumps where an inner rotor is completely contained in a pressure vessel holding the pumped fluid. The pressure vessel or primary containment device is sealed by static seals such as gaskets or O-rings. Pumps normally conform to recognized standard specifications (e.g. ISO 5199, explosion protection, electromagnetic compatibility), except where special requirements are specified herein. This document includes design features concerned with installation, maintenance and operational safety of the pumps, and defines those items to be agreed upon between the purchaser and manufacturer/supplier. Where conformity to this document has been requested and calls for a specific design feature, alternative designs can be offered providing that they satisfy the intent of this document and they are described in detail. Pumps which do not conform with all requirements of this document can also be offered providing that the deviations are fully identified and described. Whenever documents include contradictory requirements, they are applied in the following sequence of priority: purchase order (or inquiry, if no order placed), see Annexes C and D; data sheet (see Annex A) or technical sheet or specification; this document; other standards.