CEN/TS 16794-2:2017

Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443

This Technical Specification comes as a complement to the technical requirements expressed in CEN/TS 16794-1, for ensuring contactless communication interoperability between Public Transport (PT) devices or between PT devices compliant to CEN/TS 16794-1 and NFC mobiles devices compliant to NFC Forum specifications.
This document lists all the test conditions to be performed on a PT reader or a PT object in order to ensure that all the requirements specified in CEN/TS 16794-1 are met for the PT device under test.
This document applies to PT devices only:
—   PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on ISO/IEC 14443 standard series;
—   PT objects which are contactless fare media acting as a PICC contactless object based on ISO/IEC 14443 standard series.
This document applies solely to the contactless communication layers described in parts 1 to 4 of the ISO/IEC 14443 standard series. Application-to-application exchanges executed once contactless communication has been established at RF level fall outside the scope of this document. However, a transport ticketing application will need to be used so as to make end-to-end transactions during tests on the RF communication layer.
This document does not duplicate the contents of ISO/IEC 14443 standard series or ISO/IEC 10373 6 standard. It makes reference to the ISO/IEC 10373 6 applicable test methods, specifies the test conditions to be used and describes the additional specific test conditions that may be run.
The list of test conditions applicable to the PT device under test will be conditioned by the Information Conformance Statement (ICS) declaration made by the device manufacturer. For each test case, the test conditions are clearly specified in order to determine the pertinence to run or not the test case in accordance with the device capabilities or in accordance with the device manufacturer’s choice.
In order to facilitate the test report issuance, a test report template is included in Annex A of this document.
Although this document aims at becoming the primary basis for certification of contactless communication protocol applicable to PT readers and PT objects, it does not describe any certification or qualification processes as such processes should be defined between local or global transit industry stakeholders.

Öffentlicher Verkehr - Kommunikation zwischen berührungslosen Lesegeräten und Fahrscheinmedien - Teil 2: Prüfplan zur ISO/IEC 14443

Transport Public - Communication entre terminaux et objets sans contact - Partie 2 : Plan de test pour l'ISO/IEC 14443

Javni prevoz - Komunikacija med brezkontaktnimi čitalniki/terminali in prevoznimi mediji - 2. del: Načrt za preskus po ISO/IEC 14443

Ta tehnična specifikacija je dopolnitev tehničnih zahtev, izraženih v standardu CEN/TS 16794-1, za zagotavljanje brezkontaktne komunikacijske interoperabilnosti med napravami javnega prometa (PT) ali med napravami javnega prometa, ki so v skladu s standardom CEN/TS 16794-1, in mobilnimi napravami NFC, ki so v skladu s specifikacijami foruma NFC.
Ta dokument navaja vse preskusne pogoje za izvedbo s čitalniki ali predmeti javnega prometa, da se zagotovi, da naprava javnega prevoza, ki se preskuša, izpolnjuje vse zahteve, ki so določene s standardom CEN/TS 16794-1.
Ta dokument se uporablja samo za naprave javnega prometa:
– čitalnike javnega prometa,ki so sistemi brezkontaktnih terminalov in delujejo kot brezkontaktni čitalniki PCD na podlagi skupine standardov ISO/IEC 14443;
– predmete javnega prometa, ki so sistemi brezkontaktnih terminalov in delujejo kot brezkontaktni predmet PICC na podlagi skupine standardov ISO/IEC 14443.
Ta dokument se uporablja izključno za brezkontaktne komunikacijske plasti, ki so opisane v delih 1–4 skupine standardov ISO/IEC 14443. Izmenjave med aplikacijami, ki so izvedene po vzpostavitvi brezkontaktne komunikacije na radiofrekvenčni stopnji, ne spadajo v področje uporabe tega dokumenta. Kljub temu bo potrebno uporabiti aplikacijo za vozovnice za transport za izvedbo celotnih transakcij med preskusom na radiofrekvenčni komunikacijski plasti.
Ta dokument ne podvaja vsebine skupine standardov ISO/IEC 14443 ali standarda ISO/IEC 10373 6. Sklicuje se na veljavne preskusne metode standarda ISO/IEC 10373 6, določa preskusne pogoje, ki jih je treba uporabiti, in opisuje dodatne posebne preskusne pogoje, ki se lahko izvedejo.
Seznam preskusnih pogojev, ki veljajo za napravo javnega prometa, ki se preskuša, bo pogojen z izjavo o skladnosti informacij (ICS) proizvajalca naprave. Preskusni pogoji so jasno navedeni za vsak preskusni primer, da se določi primernost za izvajanje ali neizvajanje preskusnega primera v skladu z zmogljivostmi naprave ali izbiro proizvajalca naprave.
Za lažjo izdajo poročila o preskusu je v dodatku A tega dokumenta priložen vzorec poročila o preskusu.
Čeprav je namen tega dokumenta, da bi postal osnova za certificiranje brezkontaktnega komunikacijskega protokola med brezkontaktnim čitalnikom javnega prometa in brezkontaktnim predmetom javnega prometa, ne opisuje nobenih certifikatov ali postopkov za kvalifikacijo, saj naj bi bili taki postopki določeni med lokalnimi ali globalnimi interesnimi stranmi tranzitne industrije.

General Information

• Status: Withdrawn
• Publication Date: 11-Jul-2017
• Withdrawal Date: 22-Oct-2019
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 3 - Public transport (PT)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Oct-2019
• Ref Project: SIST-TS CEN/TS 16794-2:2017 - Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443

Relations

• Replaces: CEN/TS 16794-2:2015 - Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443
• Effective Date: 09-Sep-2015
• Replaced By: CEN/TS 16794-2:2019 - Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16794-2:2017
01-oktober-2017
1DGRPHãþD
SIST-TS CEN/TS 16794-2:2015
-DYQLSUHYR].RPXQLNDFLMDPHGEUH]NRQWDNWQLPLþLWDOQLNLWHUPLQDOLLQSUHYR]QLPL
PHGLMLGHO1DþUW]DSUHVNXVSR,62,(&
Public transport - Communication between contactless readers and fare media - Part 2:
Test plan for ISO/IEC 14443
Öffentlicher Verkehr - Kommunikation zwischen berührungslosen Lesegeräten und
Fahrscheinmedien - Teil 2: Prüfplan zur ISO/IEC 14443
Ta slovenski standard je istoveten z: CEN/TS 16794-2:2017
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST-TS CEN/TS 16794-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16794-2:2017

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16794-2:2017


CEN/TS 16794-2
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

July 2017
TECHNISCHE SPEZIFIKATION
ICS 35.240.15 Supersedes CEN/TS 16794-2:2015
English Version

Public transport - Communication between contactless
readers and fare media - Part 2: Test plan for ISO/IEC
14443
Transport Public - Communication entre terminaux et Öffentlicher Verkehr - Kommunikation zwischen
objets sans contact - Partie 2 : Plan de test pour berührungslosen Lesegeräten und Fahrscheinmedien -
l'ISO/IEC 14443 Teil 2: Prüfplan zur ISO/IEC 14443
This Technical Specification (CEN/TS) was approved by CEN on 17 April 2017 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16794-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16794-2:2017
CEN/TS 16794-2:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Symbols and abbreviated terms . 5
5 Description of the test environment . 5
5.1 Test bench . 5
5.2 Tolerances applicable to ambient-environment tests . 5
5.3 PCD or PICC test conditions . 6
5.4 Positional tolerance . 6
5.5 Admissible tolerances on the measurements . 6
6 PCD – Analog test plan .
...