EN ISO 445:2009
(Main)Pallets for materials handling - Vocabulary (ISO 445:2008)
Pallets for materials handling - Vocabulary (ISO 445:2008)
ISO 445:2008 defines terms relating to pallets for unit load methods of materials handling.
It also includes an informative annex listing general terms relating to materials handling.
Paletten für die Handhabung von Gütern - Begriffe (ISO 445:2008)
Diese Internationale Norm definiert Begriffe für Paletten für die Handhabung von Gütern als Ladeeinheiten.
Sie beinhaltet darüber hinaus einen informativen Anhang, der allgemeine Begriffe für die Handhabung von Gütern enthält.
Palettes pour la manutention et le transport des marchandises - Vocabulaire (ISO 445:2008)
L'ISO 445:2008 définit les termes relatifs aux palettes destinées à la manutention et au transport de marchandises sous forme d'unités de charge.
Elle comprend également une annexe informative énumérant les termes généraux se rapportant à la manutention et au transport de marchandises.
Palete za ravnanje z materiali - Slovar (ISO 445:2008)
Ta mednarodni standard določa izraze v zvezi s paletami za metode ravnanja z materiali pri natovarjanja enot. Prav tako vključuje informativno prilogo, ki našteva splošne izraze v zvezi z ravnanjem z materiali.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2010
1DGRPHãþD
SIST EN ISO 445:2000
Palete za ravnanje z materiali - Slovar (ISO 445:2008)
Pallets for materials handling - Vocabulary (ISO 445:2008)
Paletten für die Handhabung von Gütern - Begriffe (ISO 445:2008)
Palettes pour la manutention et le transport des marchandises - Vocabulaire (ISO
445:2008)
Ta slovenski standard je istoveten z: EN ISO 445:2009
ICS:
01.040.55 Pakiranje in distribucija blaga Packaging and distribution of
(Slovarji) goods (Vocabularies)
55.180.20 9HþQDPHQVNHSDOHWH General purpose pallets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 445
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2009
ICS 01.040.55; 55.180.20 Supersedes EN ISO 445:1998
English Version
Pallets for materials handling - Vocabulary (ISO 445:2008)
Palettes pour la manutention et le transport des Paletten für die Handhabung von Gütern - Begriffe (ISO
marchandises - Vocabulaire (ISO 445:2008) 445:2008)
This European Standard was approved by CEN on 27 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 445:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 445:2009 has been prepared by Technical Committee ISO/TC 51 “Pallets for unit load method
of materials handling” of the International Organization for Standardization (ISO) and has been taken over as
AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at
the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 445:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 445:2009 has been approved by CEN as a EN ISO 445:2009 without any modification.
INTERNATIONAL ISO
STANDARD 445
NORME
Third edition
Troisième édition
INTERNATIONALE
2008-10-15
Pallets for materials handling —
Vocabulary
Palettes pour la manutention et le
transport des marchandises —
Vocabulaire
Reference number
Numéro de référence
ISO 445:2008(E/F)
©
ISO 2008
ISO 445:2008(E/F)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2008
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
La reproduction des termes et des définitions contenus dans la présente Norme internationale est autorisée dans les manuels
d'enseignement, les modes d'emploi, les publications et revues techniques destinés exclusivement à l'enseignement ou à la mise en
application. Les conditions d'une telle reproduction sont les suivantes: aucune modification n'est apportée aux termes et définitions; la
reproduction n'est pas autorisée dans des dictionnaires ou publications similaires destinés à la vente; la présente Norme internationale
est citée comme document source.
À la seule exception mentionnée ci-dessus, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que
ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'ISO à
l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland/Publié en Suisse
ii © ISO 2008 – All rights reserved/Tous droits réservés
ISO 445:2008(E/F)
Contents Page
Foreword. v
1 Scope. 1
2 General. 1
3 Flat pallets. 5
4 Pallets with superstructure . 16
4.1 Post pallets. 16
4.2 Box pallets. 18
4.3 Cage pallets. 23
5 Pallet superstructures. 25
6 Pallet components and features . 27
6.1 Decks. 27
6.2 Wings and lips. 29
6.3 Apertures (openings and entries) . 31
6.4 Deckboards. 33
6.5 Chamfers. 35
6.6 Stringers/bearers. 37
6.7 Blocks and block assemblies. 41
6.8 Stacking devices. 44
6.9 Other components . 46
7 Pallet fittings . 47
8 Mechanical fasteners . 49
8.1 Nails. 49
8.2 Other fasteners. 52
9 Pallet usage. 54
10 Dimensions of pallets . 55
10.1 General. 55
10.2 Flat pallets. 57
10.3 Pallets with superstructure. 58
Annex A (informative) Terms relating to unit load handling. 59
A.1 General. 59
A.2 Stacking. 59
A.3 Racking. 60
A.4 Load stabilization. 62
Bibliography . 65
Alphabetical index . 66
French alphabetical index (Index alphabétique). 68
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.