Resilient, textile and laminate floor coverings - Floor covering standard symbols

This document establishes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols. - Resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; - textile floor coverings, excluding loose-laid mats; - laminate floor coverings; - floor panels for loose laying.

Elastische, textile und Laminat-Bodenbeläge - Standardisierte Symbole für Fußbodenbeläge

Dieses Dokument führt ein System graphischer Symbole ein, die zur Kennzeichnung der folgenden
Bodenbeläge gedacht sind; ferner regelt es die Anwendung dieser Symbole.
- elastische Bodenbeläge, hergestellt aus Kunststoff, Linoleum, Kork oder Gummi, mit Ausnahme lose
ausgelegter Matten;
- textile Bodenbeläge, mit Ausnahme lose ausgelegter Matten;
- Laminat-Fußbodenbeläge;
- Bodenplatten zum losen Auslegen.

Revêtements de sol résilients, textiles et stratifiés - Symboles normalisés de revêtements de sol

Le présent document établit un système de symboles graphiques pour utilisation dans le marquage des
revêtements de sol suivants et spécifie l’utilisation de ces symboles :
-  Revêtements de sol résilients en plastiques, en linoléum, en liège ou en caoutchouc, à l’exclusion des
tapis en pose libre ;
-  revêtements de sol textiles, à l’exclusion des tapis en pose libre ;
-  revêtements de sol stratifiés.
-  panneaux de sol en pose libre.

Netekstilne, tekstilne in laminatne talne obloge – Standardni simboli za talne obloge

General Information

Status
Withdrawn
Publication Date
20-Jun-2006
Withdrawal Date
22-Jul-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Jul-2008
Completion Date
23-Jul-2008

Relations

Buy Standard

Technical specification
TS CEN/TS 15398:2006
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15398:2006
01-oktober-2006
Netekstilne, tekstilne in laminatne talne obloge – Standardni simboli za talne
obloge
Resilient, textile and laminate floor coverings - Floor covering standard symbols
Elastische, textile und Laminat-Bodenbeläge - Standardisierte Symbole für
Fußbodenbeläge
Revetements de sol résilients, textiles et stratifiés - Symboles normalisés de revetements
de sol
Ta slovenski standard je istoveten z: CEN/TS 15398:2006
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
59.080.60 Tekstilne talne obloge Textile floor coverings
97.150 Netekstilne talne obloge Non-textile floor coverings
SIST-TS CEN/TS 15398:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15398:2006

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15398:2006
TECHNICAL SPECIFICATION
CEN/TS 15398
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
June 2006
ICS 01.080.10; 59.080.60; 97.150

English Version
Resilient, textile and laminate floor coverings - Floor covering
standard symbols
Revêtements de sol résilients, textiles et stratifiés - Elastische, textile und Laminat-Bodenbeläge -
Symboles normalisés de revêtements de sol Standardisierte Symbole für Fußbodenbeläge
This Technical Specification (CEN/TS) was approved by CEN on 24 April 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15398:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15398:2006
CEN/TS 15398:2006 (E)
Contents Page
Foreword.3
Introduction.4
1 Scope.5
2 Descriptions and definitions of symbols .5
2.1 Classification standard EN 685 .5
2.2 CE marking EN 14041.7
2.3 Additional characteristics. 12
Bibliography. 20

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 15398:2006
CEN/TS 15398:2006 (E)
Foreword
This Technical Specification (CEN/TS 15398:2006) has been prepared by Technical Committee CEN/TC 134
“Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 15398:2006
CEN/TS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.