EN ISO 11064-5:2008

Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008)

ISO 11064-5:2008 presents principles and gives requirements and recommendations for displays, controls, and their interaction, in the design of control-centre hardware and software.

Ergonomische Gestaltung von Leitzentralen - Teil 5: Anzeigen und Stellteile (ISO 11064-5:2008)

Dieser Teil der ISO 11064 zeigt Prinzipien auf, legt Anforderungen fest und gibt Empfehlungen bezüglich der Anzeigen, Stellteile und deren Interaktion bei der Gestaltung von Hard­ und Software in Leitzentralen.

Conception ergonomique des centres de commande - Partie 5: Dispositifs d'affichage et commandes (ISO 11064-5:2008)

L'ISO 11064-5:2008 présente les principes et donne les exigences et les recommandations pour les dispositifs d'affichage, les commandes et leur interaction dans le processus de conception des matériels et des logiciels utilisés dans les salles de commande.

Ergonomsko načrtovanje krmilnih central - 5. del: Prikazovalniki in elementi za krmiljenje (ISO 11064-5:2008)

General Information

• Status: Published
• Publication Date: 30-Jun-2008
• Withdrawal Date: 30-Jan-2009
• ICS: 13.180 - Ergonomics
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CEN/TC 122 - Ergonomics
• Drafting Committee: CEN/TC 122/WG 5 - Ergonomics of human-computer interaction
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jul-2008
• Completion Date: 01-Jul-2008
• Ref Project: SIST EN ISO 11064-5:2008 - Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008)

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2008
(UJRQRPVNRQDþUWRYDQMHNUPLOQLKFHQWUDOGHO3ULND]RYDOQLNLLQHOHPHQWL]D
NUPLOMHQMH,62
Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008)
Ergonomische Gestaltung von Leitzentralen - Teil 5: Anzeigen und Stellteile (ISO 11064-
5:2008)
Conception ergonomique des centres de commande - Partie 5: Dispositifs d'affichage et
commandes (ISO 11064-5:2008)
Ta slovenski standard je istoveten z: EN ISO 11064-5:2008
ICS:
13.180 Ergonomija Ergonomics
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11064-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 13.180
English Version
Ergonomic design of control centres - Part 5: Displays and
controls (ISO 11064-5:2008)
Conception ergonomique des centres de commande - Ergonomische Gestaltung von Leitzentralen - Teil 5:
Partie 5: Dispositifs d'affichage et commandes (ISO 11064- Anzeigen und Stellteile (ISO 11064-5:2008)
5:2008)
This European Standard was approved by CEN on 26 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11064-5:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This document (EN ISO 11064-5:2008) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 “Ergonomics” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2009, and conflicting national standards shall be withdrawn at
the latest by January 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11064-5:2008 has been approved by CEN as a EN ISO 11064-5:2008 without any
modification.
INTERNATIONAL ISO
STANDARD 11064-5
First edition
2008-07-01
Ergonomic design of control centres —
Part 5:
Displays and controls
Conception ergonomique des centres de commande —
Partie 5: Dispositifs d'affichage et commandes

Reference number
ISO 11064-5:2008(E)
©
ISO 2008
ISO 11064-5:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved

ISO 11064-5:2008(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Principles. 6
5 Process for display and control specification. 15
5.1 Design process . 15
5.2 Design team and competencies . 15
5.3 Evaluation. 15
5.4 Iteration. 16
5.5 Design process steps. 16
6 Alarms — High-level requirements and recommendations . 17
6.1 General. 18
6.2 Structuring. 18
6.3 Presentation . 19
6.4 Interaction and handling requirements . 20
6.5 Documentation. 20
Annex A (informative) Guidelines. 22
A.1 Overview . 22
A.2 Guidance on presentation of information . 22
A.2.1 General. 22
A.2.2 Defining network boundaries . 24
A.2.3 Determining types and numbers of pages. 24
A.2.4 Developing formats . 26
A.2.5 Design elements . 29
A.2.6 Display devices . 30
A.3 Guidance on “user-interface interaction” .30
A.3.1 General. 30
A.3.2 Network management. 31
A.3.3 Page management . 32
A.3.4 Selecting dialogue types. 32
A.3.5 System response times. 33
A.4 Selecting control devices . 34
A.4.1 General. 34
A.4.2 List of features to be controlled . 35
A.4.3 Selection of control type. 35
A.4.4 Coding of controls. 35
ISO 11064-5:2008(E)
A.5 “Soft” controls, overview displays, communications systems and CCTV. 35
A.5.1 Soft controls . 35
A.5.2 Overview displays. 36
A.5.3 Communications systems. 39
A.5.4 CCTV (closed-circuit TV) systems and presentation of pictorial images . 40
A.6 Guidance on alarm systems . 41
A.6.1 General . 41
A.6.2 Scope and objectives . 42
A.6.3 Alarm management process and procedures. 43
A.6.4 How to prioritize . 43
A.6.5 Management of change (MoC). 44
A.6.6 Roles and responsibilities. 44
A.6.7 Alarm system performance metrics and targets . 45
A.6.8 Monitoring and continuous improvement . 46
Bibliography . 47

iv © ISO 2008 – All rights reserved

ISO 11064-5:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member
...