iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14738:2002

(Main)

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002)

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002)

This European Standard establishes principles for deriving dimensions from anthropometric measurements and applying them to the design of workstations at non-mobile machinery. It is based on current ergonomic knowledge and anthropometric measurements. This European Standard specifies the body's space requirements for equipment during normal operation in sitting and standing positions. This standard does not specifically include space demands for maintenance, repairing and cleaning work.

Sicherheit von Maschinen - Anthropometrische Anforderungen an die Gestaltung von Maschinenarbeitsplätzen (ISO 14738:2002)

Diese Europäische Norm legt Grundlagen zur Ableitung von Abmessungen aus anthropometrischen Maßen und ihre Anwendung bei der Gestaltung stationärer Maschinenarbeitsplätze fest. Sie basiert auf dem derzeitigen Stand ergonomischer Erkenntnisse und anthropometrischer Maße. Diese Europäische Norm legt Anforderungen an die Größe des Raumes für den menschlichen Körper bei der Betätigung von Arbeitsmitteln im Normalbetrieb in sitzender und stehender Haltung fest. Diese Norm enthält keine speziellen Raumanforderungen für Instandhaltungs-, Reparatur- und Reinigungsarbeiten.

Sécurité des machines - Prescriptions anthropométriques relatives à la conception des postes de travail sur les machines (ISO 14738:2002)

La présente norme européenne établit les principes des dimensions provenant des mesures anthropométriques en les appliquant à la conception des postes de travail des machines non mobiles. Elle se fonde sur les connaissances ergonomiques et les mesures anthropométriques actuelles. La présente norme européenne spécifie les prescriptions spatiales pour le corps relatives aux équipements en utilisation normale, en positions assise et debout. La présente norme ne traite pas spécifiquement des espaces nécessaires aux travaux de maintenance, de réparation et de nettoyage.

Varnost strojev - Antropometrične zahteve za načrtovanje delovnih mest pri strojih (ISO 14738:2002)

General Information

Status
Withdrawn
Publication Date
14-Sep-2002
Withdrawal Date
23-Sep-2008
ICS
13.110 - Safety of machinery
13.180 - Ergonomics
Technical Committee
CEN/TC 122 - Ergonomics
Drafting Committee
CEN/TC 122/WG 1 - Anthropometry
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Sep-2008
Completion Date
24-Sep-2008
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN ISO 14738:2003 - Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002)

Relations

Corrected By
EN ISO 14738:2002/AC:2004 - Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002)
Effective Date
22-Dec-2008
Replaced By
EN ISO 14738:2008 - Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)
Effective Date
22-Dec-2008

Buy Standard

EN ISO 14738:2003EN ISO 14738:2003
PreviousNext
Standard
EN ISO 14738:2003
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14738:2003
01-marec-2003
9DUQRVWVWURMHY$QWURSRPHWULþQH]DKWHYH]DQDþUWRYDQMHGHORYQLKPHVWSULVWURMLK
,62
Safety of machinery - Anthropometric requirements for the design of workstations at
machinery (ISO 14738:2002)
Sicherheit von Maschinen - Anthropometrische Anforderungen an die Gestaltung von
Maschinenarbeitsplätzen (ISO 14738:2002)
Sécurité des machines - Prescriptions anthropométriques relatives a la conception des
postes de travail sur les machines (ISO 14738:2002)
Ta slovenski standard je istoveten z: EN ISO 14738:2002
ICS:
13.110 Varnost strojev Safety of machinery
13.180 Ergonomija Ergonomics
SIST EN ISO 14738:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 3 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 4 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 5 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 6 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 7 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 8 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 9 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 10 ----------------------

SIST EN ISO 14738:2003

---------------------- Page: 11 ----------------------

SIST EN ISO 14738:2003

----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 15537:2022(Main)
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2022)
SIST EN ISO 15537:2022

This document establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test.
This document is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, such as machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment.
This document is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement).
Although this document deals with selecting test persons from an anthropometric perspective, similar general principles can be applied for other test variables, e.g. biomechanical aspects.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16710-2:2016(Main)
Ergonomics methods - Part 2: A methodology for work analysis to support design
SIST EN 16710-2:2016

This European Standard describes a procedure for analysing human activity in relation to specifying and refining the human component in the design or redesign of machinery and work systems.
NOTE 1   The ergonomics methodology described in this European Standard could also be applied to the design or redesign of products and non-work systems.
This European Standard is intended to assist project leaders in implementing human and physical resources, methods and schedules as well as in preparing the documents necessary to meeting related requirements.
The ergonomics methodology described can be applied to all different stages in design projects from the earliest concept to the final “prototype” or “mock-up”, whatever the industrial field or sector.
The objective of this European Standard is to achieve a solution that takes into account as many situations as possible which all users - including operators, maintenance staff and installers, may encounter. This will ultimately allow improved usability of the machinery and more robust technical solutions, combined with significantly greater system resilience, user autonomy and accessibility.
NOTE 2   Examples of the application of the methodology described in this European Standard are provided in Annex A.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16710-1:2015(Main)
Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines
SIST-TP CEN/TR 16710-1:2016

This document describes the "Feedback Method", a method designed specifically to collect the contribution of machinery end-users by reconstructing and understanding how work is actually performed (i.e. the real work). This method can help to improve technical standards, as well as the design, manufacturing, and use of machinery.
By collecting the experiences of skilled users, this method can be used to reconstruct their actual work activities under different operating conditions and with any kind of machine. This helps to identify all the critical aspects having an impact on health and safety, or associated with ergonomic principles. Moreover, it makes it possible to identify some basic elements for defining the standards for machines and for their revision and improvement. It can also improve production efficiency and identify any need for additional study and research.
The method is designed to minimize the influence of the subjectivity of the facilitators and researchers in reconstructing and describing the reality of work, and to maximize the "objective" contribution of the skilled users of the machine.
The method combines a high level of reproducibility, sensitivity, and user-friendliness with low demands in term of resources, which makes it attractive to micro, small and medium-sized enterprises.
This Technical Report is addressed to standards writers, designers and manufacturers, employers-buyers, end users, craftsmen and workers, market surveillance and authorities.

  • Technical report
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13861:2011(Main)
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
SIST EN 13861:2011

This European Standard provides a methodology to achieve a coherent application of various ergonomics standards for the design of machinery. This standard presents a step model calling upon specific standards. To this end, Annex A shows a reference table with relation between hazards as described in EN ISO 12100:2010 and applicable B-standards related to ergonomics.
This European Standard can only be used in combination with other relevant ergonomics standards.
This European Standard provides guidance where no relevant or suitable ergonomics clauses in C-type standards are available.
This European Standard may also be used for incorporating ergonomics in the drafting of C-type standards.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 894-4:2010(Main)
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
SIST EN 894-4:2010

This European Standard contains ergonomic requirements for the location and arrangement of displays and control actuators in order to avoid hazards associated with their use.
This European Standard applies to displays and control actuators for machinery and other interactive equipment (e.g. devices and installations, instrument panels, control and monitoring consoles).
This European Standard is not applicable to the location and arrangement of displays and control actuators which are manufactured before the date of its publication as EN.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 614-1:2006+A1:2009(Main + Amendment)
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
SIST EN 614-1:2006+A1:2009

This European Standard establishes the ergonomic principles to be followed during the process of design of machinery.
This European Standard applies to the interactions between operators and machinery when installing, operating, adjusting, maintaining, cleaning, dismantling, repairing or transporting equipment, and outlines the principles to be followed in taking the health, safety and well-being of the operator into account. This European Standard provides a framework within which the range of more specific ergonomics standards and other related standards relevant to machinery design should be applied.
The ergonomic principles given in this European Standard apply to all ranges of human abilities and characteristics to ensure safety, health and well-being and overall system performance. Information will need to be interpreted to suit the intended use.
NOTE   Although the principles in this European Standard are orientated towards machinery for occupational use, they are also applicable to equipment and machinery for private use.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14738:2008(Main)
Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)
SIST EN ISO 14738:2009

This International Standard establishes principles for deriving dimensions from anthropometric measurements and applying them to the design of workstations at non-mobile machinery. It is based on current ergonomic knowledge and anthropometric measurements.
This International Standard specifies the body's space requirements for equipment during normal operation in sitting and standing positions. This International Standard does not specifically include space demands for maintenance, repairing and cleaning work.
This International Standard does not give recommendations specifically for visual display terminal workstations at machinery. For this purpose ISO 9241-5 can be used in conjunction with this International Standard.
Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 894-2:1997+A1:2008(Main + Amendment)
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
SIST EN 894-2:2000+A1:2009

This European Standard gives guidance on the selection, design and location of displays to avoid potential ergonomic hazards associated with their use. It specifies ergonomics requirements and covers visual, audible and tactile displays.
It applies to displays used in machinery (e.g. devices and installations, control panels, operating and monitoring consoles) for occupational and private use. Specific ergonomics requirements for visual display terminals (VDTs) used for office tasks are given in the standard EN ISO 9241.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1005-1:2001+A1:2008(Main + Amendment)
Safety of machinery - Human physical performance - Part 1: Terms and definitions
SIST EN 1005-1:2002+A1:2008

This European Standard provides terms and definitions on concepts and parameters used for EN 1005-2, EN 1005-3, EN 1005-4 and EN 1005-5.
Basic concepts and general ergonomic principles for the design of machinery are dealt with in EN 292-1, EN 292-2 and EN 614-1.
This document is not applicable to specify the machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1005-3:2002+A1:2008(Main + Amendment)
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
SIST EN 1005-3:2002+A1:2008

This European Standard presents guidance to the manufacturer of machinery or its component parts and the writer of C-standards in controlling health risks due to machine-related muscular force exertion.
This standard specifies recommended force limits for actions during machinery operation including construction, transport and commissioning (assembly, installation, adjustment), use (operation, cleaning, fault finding, maintenance, setting, teaching or process changeover) decommissioning, disposal and dismantling. The standard applies primarily to machines which are manufactured after the date of issue of the standard.
This standard applies on one hand to machinery for professional use operated by the adult working population, who are healthy workers with ordinary physical capacity, and on the other hand to machinery for domestic use operated by the whole population including youth and old people.
The recommendations are derived from research on European population.
This document is not applicable to specify the machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day