Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO 15118-4:2018)

ISO 15118-4:2018 specifies conformance tests in the form of an Abstract Test Suite (ATS) for a System Under Test (SUT) implementing an EVCC or SECC according to ISO 15118-2. These conformance tests specify the testing of capabilities and behaviors of an SUT as well as checking what is observed against the conformance requirements specified in ISO 15118-2 and against what the supplier states the SUT implementation's capabilities are.
The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118-2. The behavior tests of the ATS examine an implementation as thoroughly as is practical over the full range of dynamic conformance requirements defined in ISO 15118-2 and within the capabilities of the SUT (see NOTE).
A test architecture is described in correspondence to the ATS. The conformance test cases in this document are described leveraging this test architecture and are specified in TTCN-3 Core Language for ISO/OSI Network Layer (Layer 3) and above. The conformance test cases for the Data Link Layer (Layer 2) and Physical Layer (Layer 1) are described in ISO 15118-5. Test cases with overlapping scopes are explicitly detailed.
This document does not include specific tests of other standards referenced within ISO 15118-2, e.g. IETF RFCs. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the test cases defined in this document only consider the communication protocol defined ISO 15118-2. Power flow between the EVSE and the EV is not considered.
NOTE 1 Practical limitations make it impossible to define an exhaustive test suite, and economic considerations can restrict testing even further. Hence, the purpose of this document is to increase the probability that different implementations are able to interwork. This is achieved by verifying them by means of a protocol test suite, thereby increasing the confidence that each implementation conforms to the protocol specification. However, the specified protocol test suite cannot guarantee conformance to the specification since it detects errors rather than their absence. Thus conformance to a test suite alone cannot guarantee interworking. What it does do is give confidence that an implementation has the required capabilities and that its behavior conforms consistently in representative instances of communication.
NOTE 2 This document has some interdependencies to the conformance tests defined in ISO 15118-5 which result from ISO/OSI cross layer dependencies in the underlying protocol specification (e.g. for sleep mode)

Straßenfahrzeuge - Kommunikationsschnittstelle zwischen Fahrzeug und Ladestation - Teil 4: Konformitätsprüfungen für das Netzwerk- und Anwendungsprotokoll (ISO 15118-4:2018)

Véhicules routiers - Interface de communication entre véhicule et réseau électrique - Partie 4: Essai de conformité du protocole d'application et du réseau (ISO 15118-4:2018)

Le présent document spécifie des tests de conformité sous la forme d'une suite de tests abstraits (ATS) pour un système à tester (SUT) implémentant un EVCC ou un SECC conformément à la norme ISO 15118-2. Ces tests de conformité spécifient le contrôle des capacités et des comportements d'un SUT ainsi que la vérification de ce qui est observé en comparaison des exigences de conformité spécifiées dans la norme ISO 15118-2 et en comparaison des capacités de l'implémentation du SUT formulées par le fournisseur.
Les tests de capacités compris dans l'ATS vérifient que les capacités observables du SUT sont conformes aux exigences de conformité statiques définies dans la norme ISO 15118-2. Les tests de comportement de l'ATS examinent une implémentation de la manière la plus approfondie possible sur l'ensemble de l'éventail des exigences de conformité dynamiques définies dans la norme ISO 15118-2 et dans les limites des capacités du SUT (voir NOTE).
Une architecture de test est décrite en rapport avec l'ATS. Dans le présent document, les cas de test de conformité sont décrits en s'appuyant sur cette architecture de test et sont spécifiés en langage noyau TTCN-3 pour la couche réseau (Couche 3) ISO/OSI et supérieures. Les cas de test de conformité pour la couche liaison de données (Couche 2) et la couche physique (Couche 1) sont décrits dans la norme ISO 15118-5. Des cas de test dont les domaines d'application se recoupent sont détaillés de manière explicite.
Le présent document n'inclut pas les tests spécifiques d'autres normes données en référence dans la norme ISO 15118-2, par ex., les RFC de l'IETF. En outre, les tests de conformité spécifiés dans le présent document n'incluent pas l'évaluation du rendement, de la robustesse ou encore de la fiabilité d'une implémentation. Ils ne peuvent servir à la formulation de jugements sur la réalisation physique de primitives de service abstraites, sur la manière dont un système est implémenté, sur la manière dont il fournit un quelconque service requis, ou sur l'environnement de l'implémentation du protocole. En outre, les cas de test définis dans le présent document prennent uniquement en considération le protocole de communication défini dans la norme ISO 15118-2. Le flux d'énergie entre l'EVSE et l'EV n'est pas pris en compte.
NOTE 1 Les limitations pratiques empêchent la définition d'une suite de tests exhaustive, et des considérations économiques peuvent restreindre le test encore davantage. Par conséquent, le présent document a pour but d'accroître la probabilité d'interopérabilité de différentes implémentations. Cela est réalisé en les vérifiant au moyen d'une suite de tests de protocole qui permet ainsi d'augmenter la certitude selon laquelle chaque implémentation est conforme à la spécification du protocole. Cependant, la suite de tests de protocole spécifiée ne peut garantir une conformité à la spécification étant donné qu'elle détecte les erreurs plutôt que leur absence. Par conséquent, la conformité d'une suite de tests ne peut garantir à elle seule une interopérabilité. En revanche, cela apporte la garantie qu'une implémentation présente les capacités requises et que son comportement est systématiquement conforme dans des instances représentatives de communication.
NOTE 2 Le présent document présente certaines interdépendances avec les tests de conformité définis dans la norme ISO 15118-5 qui découlent de dépendances inter-couches ISO/OSI dans la spécification du protocole sous-jacent (

Cestna vozila - Komunikacijski vmesnik med vozilom in omrežjem - 4. del: Preskus skladnosti omrežja in aplikacijskega protokola (ISO 15118-4:2018)

Standard ISO 15118-4:2018 določa preskuse skladnosti v obliki niza abstraktnih preskusov (ATS) za sistem za preskušanje (SUT), ki uporablja komunikacijski krmilnik električnega vozila (EVCC) ali komunikacijski krmilnik opreme za napajanje (SECC) v skladu s standardom ISO 15118-2. Ti preskusi skladnosti določajo preskušanje zmogljivosti in delovanja sistema za preskušanje, pa tudi preverjanje ugotovitev s primerjavo z zahtevami glede skladnosti, določenimi v standardu ISO 15118-2, ter z navedbami dobavitelja glede zmogljivosti izvajanja sistema za preskušanje.
Preskusi zmogljivosti znotraj niza abstraktnih preskusov preverjajo, ali so opazne zmogljivosti sistema za preskušanje skladne z zahtevami glede statične skladnosti, določenimi v standardu ISO 15118-2. Preskusi delovanja znotraj niza abstraktnih preskusov preverjajo izvajanje tako temeljito, kot je praktično mogoče, na podlagi polnega razpona zahtev glede dinamične skladnosti, določenih v standardu ISO 15118-2, in znotraj zmogljivosti sistema za preskušanje (glej OPOMBO).
Testna arhitektura je opisana ob upoštevanju sistema za preskušanje. Primeri preskusov skladnosti v tem dokumentu so opisani na podlagi te testne arhitekture in so podani v jedrnem jeziku TTCN-3 za omrežno plast ISO/OSI (plast 3) in višjo. Primeri preskusov skladnosti za podatkovno povezovalno plast (plast 2) in fizično plast (plast 1) so opisani v standardu ISO 15118-5. Preskusni primeri s prekrivajočimi se področji so izrecno opisani.
Ta dokument ne zajema posebnih preskusov iz drugih standardov, na katere se sklicuje znotraj standarda ISO 15118-2, npr. IETF RFC. Poleg tega preskusi skladnosti, opisani v tem dokumentu, ne zajemajo ocenjevanja učinkovitosti niti robustnosti ali zanesljivosti implementacije. Ne morejo zagotoviti presoje glede fizične realizacije primitivov abstraktnih storitev, kako je sistem implementiran, kako zagotavlja katero koli zahtevano storitev, niti glede okolja implementacije protokola. Poleg tega primeri preskusov, opredeljeni v tem dokumentu, upoštevajo samo komunikacijski protokol, določen v standardu ISO 15118-2. Pretok energije med opremo za napajanje električnega vozila in električnim vozilom ni upoštevan.
OPOMBA 1: Zaradi praktičnih omejitev je nemogoče definirati izčrpen niz preskusov, še dodatno pa lahko preskušanje omejijo ekonomski dejavniki. Tako je namen tega dokumenta povečati verjetnost za medsebojno delovanje različnih implementacij. To se doseže tako, da se te implementacije preverijo s sredstvi niza preskusov protokola, s čimer se poveča verjetnost, da je posamezna implementacija skladna s specifikacijo protokola. Vendar pa podani niz preskusov protokola ne more zajamčiti skladnosti s specifikacijo, saj zaznava napake in ne odsotnosti implementacij. Tako skladnost z nizom preskusov sama po sebi ne more zajamčiti medsebojnega delovanja. Na ta način se samo prepriča, da implementacija vključuje zahtevane zmogljivosti in da pri reprezentativnih primerih komunikacije deluje dosledno skladno.
OPOMBA 2: Ta dokument v določeni meri zajema medsebojno odvisnost s preskusi skladnosti, definiranimi v standardu ISO 15118-5, ki izhajajo iz medslojnih odvisnosti ISO/OSI v specifikaciji osnovnega protokola (npr. za način spanja).

General Information

Status
Published
Publication Date
12-Feb-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
13-Feb-2019
Completion Date
13-Feb-2019

Buy Standard

Standard
EN ISO 15118-4:2019
English language
1470 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 15118-4:2019
01-april-2019
Cestna vozila - Komunikacijski vmesnik med vozilom in omrežjem - 4. del: Preskus
skladnosti omrežja in aplikacijskega protokola (ISO 15118-4:2018)

Road vehicles - Vehicle to grid communication interface - Part 4: Network and application

protocol conformance test (ISO 15118-4:2018)

Straßenfahrzeuge - Kommunikationsschnittstelle zwischen Fahrzeug und Ladestation -

Teil 4: Konformitätsprüfungen für das Netzwerk- und Anwendungsprotokoll (ISO 15118-

4:2018)

Véhicules routiers - Interface de communication entre véhicule et réseau électrique -

Partie 4: Essai de conformité du protocole d'application et du réseau (ISO 15118-4:2018)

Ta slovenski standard je istoveten z: EN ISO 15118-4:2019
ICS:
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
SIST EN ISO 15118-4:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15118-4:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 15118-4:2019
EN ISO 15118-4
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2019
EUROPÄISCHE NORM
ICS 43.120
English Version
Road vehicles - Vehicle to grid communication interface -
Part 4: Network and application protocol conformance test
(ISO 15118-4:2018)

Véhicules routiers - Interface de communication entre Straßenfahrzeuge - Kommunikationsschnittstelle

véhicule et réseau électrique - Partie 4: Essai de zwischen Fahrzeug und Ladestation - Teil 4:

conformité du protocole d'application et du réseau Konformitätsprüfungen für das Netzwerk- und

(ISO 15118-4:2018) Anwendungsprotokoll (ISO 15118-4:2018)
This European Standard was approved by CEN on 28 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15118-4:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15118-4:2019
EN ISO 15118-4:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 15118-4:2019
EN ISO 15118-4:2019 (E)
European foreword

The text of ISO 15118-4:2018 has been prepared by Technical Committee ISO/TC 22 "Road vehicles” of

the International Organization for Standardization (ISO) and has been taken over as EN ISO 15118-

4:2019 by Technical Committee CEN/TC 301 “Road vehicles” the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall

be withdrawn at the latest by August 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 15118-4:2018 has been approved by CEN as EN ISO 15118-4:2019 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 15118-4:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 15118-4:2019
INTERNATIONAL ISO
STANDARD 15118-4
First edition
2018-02
Road vehicles — Vehicle to grid
communication interface —
Part 4:
Network and application protocol
conformance test
Véhicules routiers — Interface de communication entre véhicule et
réseau électrique —
Partie 4: Essai de conformité du protocole d'application et du réseau
Reference number
ISO 15118-4:2018(E)
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 15118-4:2019
ISO 15118-4:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 15118-4:2019
ISO 15118-4:2018(E)
Contents Page

Foreword ........................................................................................................................................................................ vii

Introduction ................................................................................................................................................................. viii

1  Scope .................................................................................................................................................................... 1

2  Normative references .................................................................................................................................... 2

3  Terms and definitions .................................................................................................................................... 2

4  Symbols (and abbreviated terms) ............................................................................................................. 7

5  Conventions ....................................................................................................................................................... 8

5.1  Requirement structure .................................................................................................................................. 8

5.2  Test system description ................................................................................................................................ 9

6  Test architecture reference model ............................................................................................................ 9

6.1  General information ....................................................................................................................................... 9

6.2  Platform adapter interface ........................................................................................................................ 10

6.3  SUT adapter interfaces ............................................................................................................................... 10

............................................................................................................................................................... 11

6.4  Codecs

7  Test suite conventions ................................................................................................................................ 11

7.1  General information .................................................................................................................................... 11

7.2  Test suite structure (TSS) .......................................................................................................................... 11

7.3  Test profiles .................................................................................................................................................... 13

7.4  Test suite identifiers .................................................................................................................................... 62

7.5  Test suite coverage ...................................................................................................................................... 67

7.6  Test case description ................................................................................................................................ 184

7.7  Test case specification ............................................................................................................................. 185

8  Test case descriptions for 15118-2 V2GTP ...................................................................................... 198

8.1  General information ................................................................................................................................. 198

8.2  SECC test cases ............................................................................................................................................ 198

8.3  EVCC test cases ............................................................................................................................................ 202

9  Test case descriptions for 15118-2 SDP messages ........................................................................ 208

9.1  General information ................................................................................................................................. 208

9.2  SECC test cases ............................................................................................................................................ 208

9.3  EVCC test cases ............................................................................................................................................ 211

10  Test case descriptions for 15118-2 V2G application layer messages ..................................... 236

10.1  General information ................................................................................................................................. 236

10.2  SECC test cases ............................................................................................................................................ 236

10.3  EVCC test cases ............................................................................................................................................ 405

Annex A (normative) Configuration specifications .................................................................................... 671

A.1  Timer configuration ................................................................................................................................. 671

A.2  PICS configuration ..................................................................................................................................... 671

iii
© ISO 2018 ‐ All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 15118-4:2019
ISO 15118-4:2018(E)

A.3  PIXIT configuration ................................................................................................................................... 673

Annex B (normative) Control part specification .......................................................................................... 675

B.1  SECC control parts ...................................................................................................................................... 675

B.1.1  AC specific control parts .......................................................................................................................... 675

B.1.2  DC specific control parts .......................................................................................................................... 675

B.2  EVCC control parts ..................................................................................................................................... 688

B.2.1  AC specific control parts .......................................................................................................................... 702

B.2.2  DC specific control parts .......................................................................................................................... 702

Annex C (normative) Test-case specifications for 15118-2 V2GTP ...................................................... 745

C.1  SECC test cases ............................................................................................................................................. 745

C.2  EVCC test cases ............................................................................................................................................ 745

Annex D (normative) Test-case specifications for 15118-2 SDP messages ....................................... 752

D.1  SECC test cases ............................................................................................................................................. 752

D.2  EVCC test cases ............................................................................................................................................ 752

Annex E (normative) Test-case specifications for 15118-2 V2G application layer messages ..... 773

E.1  SECC test cases ............................................................................................................................................. 773

E.1.1  V2G protocol handshake ......................................................................................................................... 773

E.1.1.1 SECC test cases for SupportedAppProtocol ....................................................................................... 773

E.1.2  V2G messages .............................................................................................................................................. 773

E.1.2.1 SECC test cases for SessionSetup .......................................................................................................... 775

E.1.2.2 SECC test cases for ServiceDiscovery .................................................................................................. 775

E.1.2.3 SECC test cases for ServiceDetail .......................................................................................................... 782

E.1.2.4 SECC test cases for PaymentServiceSelection .................................................................................. 784

E.1.2.5 SECC test cases for PaymentDetails ..................................................................................................... 788

E.1.2.6 SECC test cases for Authorization ......................................................................................................... 794

E.1.2.7 SECC test cases for ChargeParameterDiscovery ............................................................................. 794

E.1.2.8 SECC test cases for PowerDelivery ....................................................................................................... 799

E.1.2.9 SECC test cases for CertificateUpdat e .................................................................................................. 824

E.1.2.10  SECC test cases for CertificateInstallation ................................................................................ 839

E.1.2.11  SECC test cases for SessionStop ..................................................................................................... 839

E.1.2.12  SECC test cases for ChargingStatus .............................................................................................. 842

E.1.2.13  SECC test cases for MeteringReceipt ........................................................................................... 846

E.1.2.14  SECC test cases for CableCheck ..................................................................................................... 848

E.1.2.15  SECC test cases for PreCharge ....................................................................................................... 852

E.1.2.16  SECC test cases for CurrentDemand ............................................................................................ 855

E.1.2.17  SECC test cases for WeldingDetection ........................................................................................ 859

E.2  EVCC test cases ............................................................................................................................................ 860

Annex F (normative) Function specifications for supporting test execution ................................. 1009

© ISO 2018 ‐ All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 15118-4:2019
ISO 15118-4:2018(E)

F.1  Configuration functions ......................................................................................................................... 1009

F.2  Pre-condition functions ......................................................................................................................... 1009

F.2.1  SECC functi ons ........................................................................................................................................... 1011

F.2.2  EVCC functions .......................................................................................................................................... 1027

F.3  Post-condition functions ....................................................................................................................... 1027

F.3.1  SECC functi ons ........................................................................................................................................... 1038

F.3.2  EVCC functions .......................................................................................................................................... 1038

F.4  Common behavior functions ............................................................................................................... 1039

F.4.1  SECC functi ons ........................................................................................................................................... 1040

F.4.2  EVCC functions .......................................................................................................................................... 1042

F.5  Library functions ..................................................................................................................................... 1044

Annex G (normative) Function specifications for 15118-2 V2GTP ..................................................... 1051

G.1  SECC functi ons ........................................................................................................................................... 1051

G.2  EVCC functions .......................................................................................................................................... 1053

Annex H (normative) Function specifications for 15118-2 SDP messages ...................................... 1056

H.1  SECC functi ons ........................................................................................................................................... 1056

H.2  EVCC functions .......................................................................................................................................... 1057

Annex I (normative) Function specifications for 15118-2 V2G application layer messages .... 1061

I.1  SECC functi ons ........................................................................................................................................... 1061

I.1.1  V2G protocol handshake ....................................................................................................................... 1061

I.1.1.1  SECC functions for SupportedAppProtocol .................................................................................... 1061

I.1.2  V2G messages ............................................................................................................................................ 1063

I.1.2.1  SECC functions for SessionSetup ........................................................................................................ 1063

I.1.2.2  SECC functions for ServiceDiscovery ................................................................................................ 1064

I.1.2.3  SECC functions for ServiceDetail ........................................................................................................ 1072

I.1.2.4  SECC functions for PaymentServiceSelection ................................................................................ 1080

I.1.2.5  SECC functions for PaymentDetails ................................................................................................... 1087

I.1.2.6  SECC functions for Authorization ....................................................................................................... 1091

I.1.2.7  SECC functions for ChargeParameterDiscovery ........................................................................... 1104

I.1.2.8  SECC functions for PowerDelivery ..................................................................................................... 1140

I.1.2.9  SECC functions for CertificateUpdate ............................................................................................... 1154

I.1.2.10  SECC functions for CertificateInstallation .............................................................................. 1167

I.1.2.11  SECC functions for SessionStop .................................................................................................. 1176

I.1.2.12  SECC functions for ChargingStatus ............................................................................................ 1176

I.1.2.13  SECC functions for MeteringReceipt ......................................................................................... 1185

I.1.2.14  SECC functions for CableCheck ................................................................................................... 1197

I.1.2.15  SECC functions for PreCharge ..................................................................................................... 1203

I.1.2.16  SECC functions for CurrentDemand .......................................................................................... 1207

© ISO 2018 ‐ All rights reserved
---------------------- Page: 11 ----------------------
SIST EN ISO 15118-4:2019
ISO 15118-4:2018(E)

I.1.2.17  SECC functions for WeldingDetection ...................................................................................... 1213

I.2  EVCC functions .......................................................................................................................................... 1217

Annex J (normative) Template specifications for V2G TCP/TLS Port Control ............................... 1373

Annex K (normative) Template specifications for 15118-2 V2GTP ................................................... 1375

K.1  Common templates ................................................................................................................................. 1375

Annex L (normative) Template specifications for 15118-2 SDP messages ..................................... 1376

L.1  Common templates ................................................................................................................................. 1376

Annex M (normative) Template specifications for 15118-2 V2G application layer messages 1377

M.1  Common templates ................................................................................................................................. 1377

M.1.1  V2G protocol handshake ...................................................................................................................... 1378

M.1.1.1  CMN templates for SupportedAppProtocol ........................................................................... 1378

M.1.2  V2G messages ........................................................................................................................................... 1378

M.1.2.1  CMN templates for SessionSetup ............................................................................................... 1378

M.1.2.2  CMN templates for ServiceDiscovery ....................................................................................... 1378

M.1.2.3  CMN templates for Authorization ............................................................................................. 1381

M.1.2.4  CMN templates for PowerDelivery ........................................................................................... 1381

M.1.2.5  CMN templates for SessionStop ................................................................................................. 1383

M.1.2.6  CMN templates for ChargingStatus ........................................................................................... 1384

M.1.2.7  CMN templates for CableCheck .................................................................................................. 1384

M.1.2.8  CMN templates for PreCharge .................................................................................................... 1385

M.1.2.9  CMN templates for CurrentDemand ......................................................................................... 1385

M.1.2.10  CMN templates for WeldingDetection ..................................................................................... 1387

M.2  SECC templates ......................................................................................................................................... 1387

M.3  EVCC templates ........................................................................................................................................ 1397

Annex N (normative) Template specifications for Security .................................................................. 1430

N.1  Common templates ................................................................................................................................. 1430

Annex O (normative) Data type definitions ................................................................................................ 1434

O.1  Data types for PICS .................................................................................................................................. 1434

O.2  Data types for PIXIT ............................................................................................................................... 1434

O.3  Data types for V2G TCP/TLS Port Control ...................................................................................... 1436

O.4  Data types for V2GTP ............................................................................................................................. 1437

O.5  Data types for SDP messages ............................................................................................................... 1438

O.6  Data types for V2G messages .............................................................................................................. 1438

O.7  Data types for Security .......................................................................................................................... 1457

© ISO 2018 ‐ All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 15118-4:2019
ISO 15118-4:2018(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national

standards bodies (ISO member bodies). The work of preparing International Standards is normally

carried out through ISO technical committees. Each member body interested in a subject for which a

tech
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.