EN 10293:2005

Steel castings for general engineering uses

This document applies to steel castings:
-   for general engineering uses. Its uses include machinery (mechanical, electrical...), automotive industries, railroad, armament, agricultural equipment, mining � .
In cases where castings are joined by welding by the founder, this document applies.
In cases where castings are welded:
-   to wrought products (plates, tubes, forgings...), or
-   by non founders
this document does not apply.

Stahlguss für allgemeine Anwendungen

Dieses Dokument gilt für Stahlguss
-   für allgemeine Anwendungen. Die Verwendung schließt Maschinen (mechanisch, elektrisch, ...), Kraftfahrzeugindustrie, Eisenbahnen, Rüstung, Landmaschinen, Bergbau,... ein.
In Fällen, in denen Gussstücke vom Gießer zusammengeschweißt werden, gilt dieses Dokument.
In Fällen, in denen Gussstücke geschweißt werden
-   zusammen mit umformbaren Erzeugnissen (Bleche, Rohre, Schmiedestücke, ...) oder
-   von anderen als Gießern
gilt dieses Dokument nicht.

Aciers moulés d'usage général

Le présent projet de Norme européenne s'applique aux aciers moulés utilisés :
¾ en mécanique générale. Leur utilisation inclut l'équipement (mécanique, électrique¿), l'industrie automobile, les chemins de fer, l'armement, les équipements agricoles¿
Dans le cas où les produits moulés sont assemblés par soudage par le fondeur, la présente Norme européenne s'applique.
Dans les cas où les pièces sont soudées :
¾ à des produits corroyés (tôles, tubes, pièce forgées¿) ;
¾ ou par des non fondeurs,
la présente Norme européenne ne s'applique pas.

Jekleni ulitki za splošne tehnične namene

General Information

• Status: Withdrawn
• Publication Date: 05-Apr-2005
• Withdrawal Date: 27-Jan-2015
• ICS: 77.140.80 - Iron and steel castings
• Technical Committee: ECISS/TC 111 - Steel castings and forgings
• Drafting Committee: ECISS/TC 111 - Steel castings and forgings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Jan-2015
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10293:2005 - Steel castings for general engineering uses

Relations

• Replaced By: EN 10293:2015 - Steel castings - Steel castings for general engineering uses
• Effective Date: 03-Nov-2011
• Corrected By: EN 10293:2005/AC:2008 - Steel castings for general engineering uses
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10293:2005
01-junij-2005
-HNOHQLXOLWNL]DVSORãQHWHKQLþQHQDPHQH
Steel castings for general engineering uses
Stahlguss für allgemeine Anwendungen
Aciers moulés d'usage général
Ta slovenski standard je istoveten z: EN 10293:2005
ICS:
77.140.80 Železni in jekleni ulitki Iron and steel castings
SIST EN 10293:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 10293:2005

---------------------- Page: 2 ----------------------

SIST EN 10293:2005
EUROPEAN STANDARD
EN 10293
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2005
ICS 77.140.80
English version
Steel castings for general engineering uses
Aciers moulés d'usage général Stahlguss für allgemeine Anwendungen
This European Standard was approved by CEN on 14 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10293:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 10293:2005
EN 10293:2005 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
■ 3 Terms and definitions .5
•••• 4 Information to be supplied by the purchaser .5
5 Designation .5
6 Manufacture.5
6.1 Manufacturing process .5
■ 6.1.1 Melting .5
6.1.2 Heat treatment.5
6.2 Welding operations.6
■ 6.2.1 General.6
6.2.2 Production welding.6
■ 6.3 Further processing .6
7 Requirements.6
■ 7.1 General.6
7.2 Material .
...