EN 12101-2:2003

Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators

This Part of this European Standard specifies requirements and gives test methods for natural smoke and heat exhaust ventilators which are intended to be installed as a component of a natural smoke and heat exhaust system conforming to prEN 12101-4 and prEN 12101-5.

Rauch- und Wärmefreihaltung - Teil 2: Festlegungen für natürliche Rauch- und Wärmeabzugsgeräte

Dieser Teil dieser Europäischen Norm legt die Anforderungen fest und gibt Prüfverfahren für natürliche Rauch- und Wärmeabzugsgeräte (NRWG) fest, die zum Einbau als Teil einer natürlichen Rauch- und Wärmeabzugsanlage vorgesehen sind.

Systèmes pour le contrôle des fumées et de la chaleur - Partie 2: Spécifications relatives aux dispositifs d'évacuation naturelle de fumées et de chaleur

La présente Norme européenne spécifie les exigences et fournit les méthodes d'essai pour les dispositifs d'évacuation de fumées et de chaleur destinés à  être installés comme composant d'un système de désenfumage naturel.

Sistemi za nadzor dima in toplote – 2. del: Določila za odvod dima in toplote z naravnim prezračevanjem

General Information

• Status: Withdrawn
• Publication Date: 17-Jun-2003
• Withdrawal Date: 28-Mar-2017
• ICS: 13.220.20 - Fire protection
• Technical Committee: CEN/TC 191 - Fixed firefighting systems
• Drafting Committee: CEN/TC 191/SC 1 - Smoke and heat control systems and components
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Mar-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
• Ref Project: SIST EN 12101-2:2003 - Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators

Relations

• Replaced By: EN 12101-2:2017 - Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
• Effective Date: 12-Mar-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rauch- und Wärmefreihaltung - Teil 2: Festlegungen für natürliche Rauch- und WärmeabzugsgeräteSystemes pour le contrôle des fumées et de la chaleur - Partie 2: Spécifications relatives aux dispositifs d'évacuation naturelle de fumées et de chaleurSmoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators91.140.30VLVWHPLVentilation and air-conditioning13.220.20Fire protectionICS:Ta slovenski standard je istoveten z:EN 12101-2:2003SIST EN 12101-2:2003en01-september-2003SIST EN 12101-2:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12101-2June 2003ICS 13.220.20; 23.120English versionSmoke and heat control systems - Part 2: Specification fornatural smoke and heat exhaust ventilatorsSystèmes pour le contrôle des fumées et de la chaleur -Partie 2: Spécifications pour les dispositifs d'évacuation defumées et de chaleurRauch- und Wärmefreihaltung - Teil 2: Festlegungen fürnatürliche Rauch- und WärmeabzugsgeräteThis European Standard was approved by CEN on 9 April 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12101-2:2003 ESIST EN 12101-2:2003

General testing procedures.17SIST EN 12101-2:2003

Determination of the aerodynamic free area.18B.1Simple assessment procedure.18B.2Experimental procedure.18B.2.1General.18B.2.2Test apparatus.18B.2.3Test specimen.19B.2.4Test procedure.19B.2.5Evaluation of test results.20Annex C (normative)
Test method for reliability.27C.1Objective of test.27C.2Test apparatus.27C.3Test specimen.27C.4Test procedure.27Annex D (normative)
Test method for opening under load.28D.1Objective of test.28D.2Test apparatus.28D.3Test specimen.28D.4Test procedure.28Annex E (normative)
Test method for low ambient temperature.29E.1Objective of test.29E.2Test apparatus.29E.3Test specimen.29E.4Test procedure.29E.4.1Simplified test method.29E.4.2Test with complete ventilator.30Annex F (normative)
Test methods for wind load.31F.1Objective of test.31F.2Test apparatus.31F.3Test specimen.31F.4Test procedure.31F.4.1Wind load.31F.4.2Vibration.
...