EN 16865:2016

Inland navigation vessels - Connections and assembled hoses for the transfer of potable water

This European standard specifies the design, dimensions and technical requirements for connections and pipelines for storing potable water for inland navigation vessels.
These are:
-   a fixed connection on the supply side;
-   pipeline;
-   a fixed connection on the consumer side;
-   a connection for retrofitting inland navigation vessels that have a closure device level with the deck (internal pipe thread pursuant to EN ISO 228 1), consisting of a connecting part with a threaded connection and fixed coupling.
Necessary measures to prevent electrostatic charge and overfilling are not governed by the standard.
National regulations apply to drinking water supply plants. The requirements of this European standard supplement these regulations.

Fahrzeuge der Binnenschifffahrt - Anschlüsse und Schlauchleitungen für das Bunkern von Trinkwasser

Diese Europäische Norm legt Bauart, Maße und technische Anforderungen von Anschlüssen und Schlauchleitungen für das Bunkern von Trinkwasser für Fahrzeuge der Binnenschifffahrt fest.
Dies sind:
-   versorgerseitiger Festanschluss;
-   Schlauchleitung;
-   verbraucherseitiger Festanschluss;
-   Anschluss zur Nachrüstung von Fahrzeugen der Binnenschifffahrt, die einen decksgleichen Verschluss (Rohrinnengewinde nach EN ISO 228 1) haben, bestehend aus Anschlussstück mit Gewindestutzen und Festkupplung.
Notwendige Maßnahmen zur Verhinderung der elektrostatischen Aufladung und der Überfüllung werden in der Norm nicht geregelt.
Für Trinkwasserversorgungsanlagen gelten nationale Bestimmungen. Die Anforderungen dieser Europäischen Norm ergänzen diese Bestimmungen.

Bateaux de navigation intérieure - Raccords et tuyaux flexibles pour le ravitaillement en eau potable

La présente Norme européenne définit le type, les dimensions et les exigences techniques des raccordements et des tuyaux flexibles pour le ravitaillement en eau potable des bateaux de navigation intérieure.
Il s’agit :
-   du raccordement fixe côté fournisseur ;
-   du tuyau flexible ;
-   du raccordement fixe côté consommateur ;
-   du raccordement de post-équipement des bateaux de navigation intérieure disposant d’une fermeture au même niveau que le pont (filetage de tuyauterie intérieur conforme à l’EN ISO 228-1), qui se compose d’une pièce de raccordement avec embout fileté et d’un raccord fixe.
Les mesures nécessaires pour éviter toute charge électrostatique et tout risque de remplissage excessif ne sont pas traitées dans cette norme.
Concernant les installations d’alimentation en eau potable, les dispositions nationales s’appliquent. Les exigences de la présente Norme européenne complètent ces dispositions.

Plovila za celinske vode - Povezave in cevni priključki za dobavo pitne vode

Ta evropski standard določa zasnovo, mere in tehnične zahteve za povezave in cevovode za shranjevanje pitne vode za plovila za celinske vode.
Ti so:
– stalna povezava na dovodni strani;
– cevovod;
– stalna povezava na strani porabe;
– povezava za nameščanje opreme na plovila za celinske vode z zaporno napravo, ki je poravnana s palubo (navoj notranje cevi je v skladu s standardom EN ISO 228 1), ki je sestavljena iz povezovalnega elementa s povezavo z navojem in stalnega spoja.
Ukrepi, ki so potrebni za preprečevanje kopičenja elektrostatičnega naboja in prenapolnjenosti, niso zajeti v tem standardu.
Nacionalni predpisi veljajo za obrate za dovajanje pitne vode. Zahteve tega evropskega standarda dopolnjujejo te predpise.

General Information

• Status: Published
• Publication Date: 04-Oct-2016
• Withdrawal Date: 29-Apr-2017
• ICS: 47.020.30 - Piping systems
• ICS: 47.060 - Inland navigation vessels
• Technical Committee: CEN/TC 15 - Inland navigation vessels
• Drafting Committee: CEN/TC 15 - Inland navigation vessels
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 20-Jun-2022
• Ref Project: SIST EN 16865:2016 - Inland navigation vessels - Connections and assembled hoses for the transfer of potable water

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrzeuge der Binnenschifffahrt - Anschlüsse und Schlauchleitungen für das Bunkern von TrinkwasserBateaux de navigation intérieure - Raccords et tuyaux flexibles pour le ravitaillement en eauInland navigation vessels - Connections and assembled hoses for the transfer of potable water47.060Inland navigation vessels47.020.30Sistemi ceviPiping systemsICS:Ta slovenski standard je istoveten z:EN 16865:2016SIST EN 16865:2016en,fr,de01-december-2016SIST EN 16865:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16865
October
t r s x ICS
v yä r t rä u râ
v yä r x r English Version
Inland navigation vessels æ Connections and assembled hoses for the transfer of potable water Bateaux de navigation intérieure æ Raccords et tuyaux flexibles pour le ravitaillement en eau potable
Fahrzeuge der Binnenschifffahrt æ Anschlüsse und Schlauchleitungen für das Bunkern von Trinkwasser This European Standard was approved by CEN on
s t June
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z x wã t r s x ESIST EN 16865:2016

Figures Figure 1 — Overview of potable water transfer, here the example has a fixed connection on the supply side, a pipeline and a fixed coupling on the consumer side . 8 Figure 2 — Overview of potable water transfer, here the example has a fixed pipeline connected on the supply side and a retrofitting coupling on the consumer side . 9 Figure 3 — Fixed connection . 10 Figure 4 — Pipe connection . 11 Figure 5 — Retrofitting connection . 12 Figure 6 — Plate for labelling the potable water connection . 15
1 Scope This European standard specifies the design, dimensions and technical requirements for connections and pipelines for storing potable water for inland navigation vessels. These are: — a fixed connection on the supply side; — pipeline; — a fixed connection on the consumer side; — a connection for retrofitting inland navigation vessels that have a closure device level with the deck (internal pipe thread pursuant to EN ISO 228-1), consisting of a connecting part with a threaded connection and fixed coupling. Necessary measures to prevent electrostatic charge and overfilling are not governed by the standard. National regulations apply to drinking water supply plants. The requirements of this European standard supplement these regulations. 2 Normative references The following documents cited in whole or in part in this document are required for the application of this document. For dated references, only the edition referred to applies. For undated references, the latest version of the document referred to applies (including all amendments). DIN 14302, PN 16 aluminium alloy C pressure coupling DIN 14307-1, PN 16 aluminium alloy C fixed coupling with sealing ring for pressure operation DIN 14311, PN 16 aluminium alloy C dummy coupling for pressure and suction operation EN 10220, Seamless and welded steel tubes – Dimensions and masses per unit length EN 22768-1, General Tolerances — Part 1: Tolerences for linear and angular dimensions without records of individual tolerances (ISO 2768-1:1989)
EN ISO 228-1, Pipe threads where pressure-tight connections are not made on the thread – Part 1: Dimensions, tolerances and designations (ISO 228-1) EN ISO 9093-1, Small craft – Seacocks and through-hull fittings – Part 1: Metallic parts (ISO 9093-1) ISO 14726, Ships and marine technology — Identification colours for the content of piping systems 3 Terms and definitions The following terms apply to the application of this document. SIST EN 16865:2016

Components 4.2.1 General information The position of the connection and the dimensions and specifications as set out under Paragraph 4 - Paragraph 7 shall be observed for the connection. On the supply side, there are the following versions: — Fixed connection to connect a pipeline; — Permanently connected pipeline. On the consumer side there are the following versions: — Fixed connection; — Retrofitting connection. The overviews in Figure 1 and Figure 2 provide examples of connections for storing potable water. SIST EN 16865:2016

Key a
Fixed connection on the supply side. b Pipeline. c Fixed connection on the consumer side. Figure 1 — Overview of potable water transfer, here the example has a fixed connection on the supply side, a pipeline and a fixed coupling on the consumer side
Key a
Permanently connected pipeline on the supply side. b
Retrofitting connector. SIST EN 16865:2016
...