Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001)

This standard applies to welding processes where the skill of the diver-welder or welding operator has a significant
influence on weld quality.
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and
certification for the approval testing of diver-welder or welding operator performance for the welding of steels
underwater in a hyperbaric dry environment.  The recommended format for the certificate of approval testing is given
in Annex A.
During the approval test the diver-welder or welding operator should be required to show adequate practical
experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for
which he is to be approved, information on these aspects is given in Annex B.
This standard is applicable when the diver-welder s or welding operator s approval testing is required by the
purchaser, by inspection authorities or by other organisations.
The welding processes referred to in this standard include fusion welding processes which are designated as manual
or partly mechanized welding for diver-welders and fully mechanized or automatic welding for operators (see 5.2).
All new approvals are in accordance with this standard from the date of this issue.
However, this standard does not invalidate previous diver-welder or welding operator approvals made to former
national standards or specifications, providing the intent of the technical requirements is satisfied and the previous
approvals are relevant to the application and production work on which they are to be employed.
Also, where additional tests should be carried out to make the approval technically equivalent it is only necessary
to do the additional tests on a test piece which should be made in accordance with this standard.

Prüfung von Schweißern für Unterwasserschweißen - Teil 2: Unterwasserschweißer und Bediener von Schweißanlagen für Trockenschweißen unter Überdruck (ISO 15618-2:2001)

Diese Norm gilt für Schweißprozesse, bei denen das Können des Unterwasserschweißers oder das des Bedieners
von Schweißanlagen einen entscheidenden Einfluss auf die Qualität der Schweißung hat.
Diese Norm legt die wesentlichen Anforderungen, Geltungsbereiche, Prüfbedingungen, Bewertungsanforderungen
und Bescheinigungen über die Prüfung zur Anerkennung des Unterwasserschweißers sowie des Bedieners von
Schweißanlagen für Stahlschweißungen unter Wasser in einer trockenen Überdruckumgebung fest. Im Anhang A
ist der empfohlene Vordruck für die Prüfungsbescheinigung zur Anerkennung wiedergegeben.
Bei der Prüfung zur Anerkennung des Unterwasserschweißers oder des Bedieners von Schweißanlagen sollte der
Nachweis gefordert werden, dass er angemessene praktische Erfahrungen und Fachkenntnisse (Prüfung nicht
obligatorisch) hinsichtlich der Schweißprozesse, Werkstoffe und Sicherheitsanforderungen hat, für die er anerkannt
werden soll; Hinweise dafür sind im Anhang B enthalten.
Diese Norm gilt, wenn eine Prüfung des Unterwasserschweißers oder des Bedieners von Schweißanlagen vom
Kunden, durch Abnahmeorganisationen oder von sonstigen Stellen gefordert wird.
Diese Norm bezieht sich auf solche Schmelzschweißprozesse, die vom Unterwasserschweißer von Hand oder
teilmechanisch oder durch Bediener von Schweißanlagen vollmechanisch oder automatisch ausgeführt werden (sie-
he 5.2).
Alle neuen Anerkennungen werden vom Tag der Veröffentlichung dieser Norm mit ihr übereinstimmen.
Diese Norm setzt jedoch bestehende Anerkennungen von Unterwasserschweißern oder Bedienern von Schweiß-
anlagen, die nach früheren nationalen Normen oder Vorschriften abgelegt worden sind, nicht außer Kraft, vor-
ausgesetzt, die technischen Anforderungen sind erfüllt und die früheren Prüfungen entsprechen der Anwendung und
der Fertigung, in der sie eingesetzt werden.

Epreuve de qualification des soudeurs pour le soudage sous l'eau - Partie 2: Scaphandriers soudeurs et opérateurs soudeurs pour le soudage hyperbare en caisson (ISO 15618-2:2001)

La présente norme s'applique à des procédés de soudage pour lesquels l'habileté manuelle du scaphandrier soudeur ou de l'opérateur soudeur a une influence déterminante sur la qualité de l'assemblage.  La présente norme est applicable dans le cas où la qualification du scaphandrier soudeur ou de l'opérateur soudeur est exigée par le client, par l'organisme d'inspection ou par une autre instance.  Les procédés de soudage concernés par la présente norme sont les procédés de soudage par fusion, manuels ou semi-automatiques pour les scaphandriers soudeurs et entièrement mécanisés et automatiques pour les opérateurs soudeurs (voir 5.2).  Toute nouvelle qualification est conforme à la présente norme dès parution de celle-ci.  La présente norme ne rend toutefois pas caduques les qualifications de scaphandriers soudeurs et d'opérateurs soudeurs délivrées au titre d'anciennes normes ou spécifications nationales dans la mesure où l'esprit de ses exigences techniques est respecté et où ces dernières correspondent aux applications et aux fabrications pour lesquelles elles sont employées.  Si des essais complémentaires sont effectués pour rendre l'ancienne qualification nationale techniquement équivalente, il convient que ceux-ci soient effectués sur des assemblages de qualification conformes à la présente norme. Il convient que les qualifications dispensées sur la base des normes ou spécifications nationales antérieures soient examinées et fassent l'objet d'un accord sur leur utilisation entre les parties contractantes, ceci à l'occasion de l'appel d'offres ou lors de la conclusion d'un contrat.  La délivrance du certificat de qualification relève de la seule responsabilité de l'examinateur ou de l'organisme d'examen.

Preskušanje varilcev za podvodno varjenje - 2. del: Podvodni varilci in operaterji za suho varjenje v vodi pod povišanim tlakom (ISO 15618-2:2001)

General Information

Status
Published
Publication Date
14-Dec-2001
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
30-May-2006
Completion Date
30-May-2006

Buy Standard

Standard
EN ISO 15618-2:2003
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15618-2:2003
01-maj-2003
Preskušanje varilcev za podvodno varjenje - 2. del: Podvodni varilci in operaterji
za suho varjenje v vodi pod povišanim tlakom (ISO 15618-2:2001)
Qualification testing of welders for under-water welding - Part 2: Diver-welders and
welding operators for hyperbaric dry welding (ISO 15618-2:2001)
Prüfung von Schweißern für Unterwasserschweißen - Teil 2: Unterwasserschweißer und
Bediener von Schweißanlagen für Trockenschweißen unter Überdruck (ISO 15618-
2:2001)
Epreuve de qualification des soudeurs pour le soudage sous l'eau - Partie 2:
Scaphandriers soudeurs et opérateurs soudeurs pour le soudage hyperbare en caisson
(ISO 15618-2:2001)
Ta slovenski standard je istoveten z: EN ISO 15618-2:2001
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 15618-2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15618-2:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 15618-2:2003
EUROPEAN STANDARD
EN ISO 15618-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 25.160.01
English version
Qualification testing of welders for under-water welding - Part 2:
Diver-welders and welding operators for hyperbaric dry welding
(ISO 15618-2:2001)
Epreuve de qualification des soudeurs pour le soudage Prüfung von Schweißern für Unterwasserschweißen - Teil
sous l'eau - Partie 2: Scaphandriers soudeurs et 2: Unterwasserschweißer und Bediener von
opérateurs soudeurs pour le soudage hyperbare en Schweißanlagen für Trockenschweißen unter Überdruck
caisson (ISO 15618-2:2001) (ISO 15618-2:2001)
This European Standard was approved by CEN on 14 August 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15618-2:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15618-2:2003
EN ISO 15618-2:2001 (E)
Contents
Page
Foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 6
4 Symbols and abbreviations . 6
4.1 General . 6
4.2 Test piece . 6
4.3 Consumable . 6
4.4 Miscellaneous . 6
5 Essential variables for approval testing . 7
5.1 General . 7
5.2 Welding processes . 7
5.3 Joint types (butt and fillet welds) . 7
5.4 Material groups . 7
5.5 Consumables . 7
5.6 Dimensions . 8
5.7 Welding positions . 8
5.8 Hyperbaric environment . 8
6 Range of approval . 8
6.1 General . 8
6.2 Welding process .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.