EN 478:2018

Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C

This European Standard specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.

Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung des Erscheinungsbildes nach Lagerung bei 150 °C

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Einflusses von Wärme bei 150 °C an der Luft auf Profile aus weichmacherfreiem Polyvinylchlorid (PVC U) fest.
Sie ist auch für Profile auf Basis von PVC bei vorgegebenen Temperaturen/Prüfbedingungen anwendbar.

Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Caractérisation de l'aspect après conditionnement à 150 °C

Le présent document spécifie une méthode de détermination du comportement à la chaleur des profilés en poly(chlorure de vinyle) non plastifié (PVC-U), à une température de l’air de 150 °C.
Elle s’applique également aux profilés à base de PVC à des températures/dans des conditions d’essai spécifiées.

Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje videza po izpostavi temperaturi 150 °C

Ta evropski standard določa metodo za ugotavljanje vpliva toplote na neprevlečene profile iz trdega polivinilklorida (PVC-U), ki jo je treba opraviti na zraku pri 150 °C.
Uporablja se tudi za profile na osnovi PVC pri določenih temperaturah/preskusnih pogojih.

General Information

• Status: Published
• Publication Date: 30-Jan-2018
• Withdrawal Date: 30-Jul-2018
• ICS: 83.080.20 - Thermoplastic materials
• ICS: 83.140.99 - Other rubber and plastics products
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 21 - Profiles for windows and doors
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Ref Project: SIST EN 478:2018 - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C

Relations

• Replaces: EN 478:1995 - Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method
• Effective Date: 07-Feb-2018
• Revised: prEN 478 - Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C
• Effective Date: 17-Jan-2024

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje videza po izpostavi temperaturi 150 °CProfile aus weichmacherfreiem Polyvinylchlorid (PVC-U) - Bestimmung des Verhaltens nach Lagerung bei 150 °C - PrüfverfahrenProfilés de poly(chlorure de vinyle) non plastifié (PVC-U) - Caractérisation de l’aspect après conditionnement à 150 °C - Méthode d’essaiPlastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics productsICS:Ta slovenski standard je istoveten z:EN 478:2018SIST EN 478:2018en,fr,de01-april-2018SIST EN 478:2018SLOVENSKI
STANDARDSIST EN 478:20001DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 478
January
t r s z ICS
z uä r z rä t râ
z uä s v rä { { Supersedes EN
v y zã s { { wEnglish Version
Determination of the appearance after exposure at
s w r
¹Cconditionnement à
s w r
¹C
Kunststoffe æ Profile auf Basis von Polyvinylchlorid rscheinungsbildes nach Lagerung bei
s w r
¹C This European Standard was approved by CEN on
x December
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v y zã t r s z ESIST EN 478:2018
...