EN 13032-2:2004

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places

This document specifies the required data for lamps and luminaires for the verification of conformity to the requirements of EN 12464-1 and prEN 12464-2. It also specifies data that are commonly used for lighting of indoor and outdoor work places. When these data are provided, they should conform to this document.

Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 2: Darstellung der Daten für Arbeitsstätten in Innenräumen und im Freien

Lumière et éclairage - Mesure et présentation des caractéristiques photométriques des lampes et luminaires - Partie 2 : Présentation des données utilisées dans les lieux de travail intérieurs et extérieurs

Svetloba in razsvetljava – Merjenje in podajanje fotometrijskih podatkov svetlobnih virov in svetilk – 2. del: Podajanje podatkov za delovna mesta v notranjih prostorih in na prostem

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2004
• Withdrawal Date: 21-Nov-2017
• ICS: 17.180.20 - Colours and measurement of light
• ICS: 29.140.01 - Lamps in general
• Technical Committee: CEN/TC 169 - Lighting applications
• Drafting Committee: CEN/TC 169/WG 2 - Lighting of work places
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Nov-2017
• Ref Project: SIST EN 13032-2:2005 - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places

Relations

• Replaced By: EN 13032-2:2017 - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places
• Effective Date: 06-Dec-2017
• Corrected By: EN 13032-2:2004/AC:2007 - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Svetloba in razsvetljava – Merjenje in podajanje fotometrijskih podatkov svetlobnih virov in svetilk – 2. del: Podajanje podatkov za delovna mesta v notranjih prostorih in na prostemLicht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 2: Darstellung der Daten für Arbeitsstätten in Innenräumen und im FreienLumiere et éclairage - Mesure et présentation des caractéristiques photométriques des lampes et luminaires - Partie 2 : Présentation des données utilisées dans les lieux de travail intérieurs et extérieursLight and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places91.160.01Razsvetljava na splošnoLighting in general17.180.20Barve in merjenje svetlobeColours and measurement of lightICS:Ta slovenski standard je istoveten z:EN 13032-2:2004SIST EN 13032-2:2005en01-marec-2005SIST EN 13032-2:2005SLOVENSKI
STANDARD



SIST EN 13032-2:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13032-2December 2004ICS 17.180.20; 29.140.01English versionLight and lighting - Measurement and presentation ofphotometric data of lamps and luminaires - Part 2: Presentationof data for indoor and outdoor work placesLumière et éclairage - Mesure et présentation descaractéristiques photométriques des lampes et luminaires -Partie 2 : Présentation des données utilisées dans les lieuxde travail intérieurs et extérieursLicht und Beleuchtung - Messung und Darstellungphotometrischer Daten von Lampen und Leuchten - Teil 2:Darstellung der Daten für Arbeitsstätten in Innenräumenund im FreienThis European Standard was approved by CEN on 15 November 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13032-2:2004: ESIST EN 13032-2:2005



EN 13032-2:2004 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Lamp data.6 5 Luminaire data.7 Annex A (normative)
Calculation of UF-tables.10 Bibliography.18
SIST EN 13032-2:2005



EN 13032-2:2004 (E) 3 Foreword This document (EN 13032-2:2004) has been prepared by Technical Committee CEN/TC 169 “Light and lighting”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. According to the CEN/CENELEC Interna
...